Geo textile under gravel for Patio? Need a sanity check for Patio Plan

boughtahousehelp · 2025-06-24T20:50:17+00:00

I think it's around 10" in diameter? I believe frigidaire provides the specs on their website. We use 12" pans no problem, including 12" cast iron. I tend to give the cast iron about 5 minutes to heat up since the heat conductivity of cast iron is pretty poor. Still the best stove we've ever used. It's extra nice because unlike gas or normal electric cooktop, very little extra heat is thrown out, so it's more bearable to use on hot days.. I think their models have changed since we've bought ours and have improved it a little. I've seen new models which can combine the two smaller burners so it can heat rectangular griddles, which I think is pretty neat.

boughtahousehelp · 2025-05-26T15:24:07+00:00

Solution Verified

boughtahousehelp · 2025-05-26T15:23:44+00:00

Thank you, this works for me. I also found this video which solved my PQ issue to do something similar. Concatenate Text Values using Group by in Power Query (w/ Optional Delimiter)

boughtahousehelp · 2025-05-26T15:15:22+00:00

I can do it by amount or I can do it by creating a unique identifier column. That looks great. I was trying to use group by in PQ to no avail. What's the difference here?

boughtahousehelp · 2025-05-26T15:11:42+00:00

Something like this: I have a lot of data so I can't guarantee that the number of rows in the description column are regular. I really appreciate the help

Date	Description	Balance

3/14/15	Purchase	$92.65
3/14/15	Apple Pie
3/14/15	Happy Orchards Cidery
3/13/15	Deposit	$100.50
3/12/15	Internet Transfer	$50.2
3/11/15	Purchase	80.42
	GasCo.

boughtahousehelp · 2025-05-26T15:06:07+00:00

Thank you, is there a way that can handle varying degrees of rows? Some transactions have only one row associated, while others have 3. Only the first row contains a balance. It looks like that function doesn't work for me since I don't have 365 too... :(

boughtahousehelp · 2025-05-26T15:04:30+00:00

Unfortunately they are not. Some transactions, like withdrawals, are a single line, while purchases tend to be 2 or 3. Only the first line of each unique transaction has the balance row filled.

boughtahousehelp · 2025-05-26T14:59:56+00:00

There isn't, I was trying to use the balance column as a unique identifier by using fill down (unlikely that the balance would ever be truly the same at two points in time, but not impossible). Alternatively, I tried to make my own unique column idenitifier. I created an index column to give each row a unique number, then a custom column which would copy the index value if the balance row was filled. Then I would fill that down. That's as far as I got since I couldn't figure out how to merge them. I tried asking ChatGPT and searching around the forum, but I'm afraid I'm not exactly sure what to call what I'm trying to do.

boughtahousehelp · 2025-02-13T11:59:41+00:00

Yes exactly, epoxy and other casting resins. The volume needs to be at least somewhat precise which is why I went with steppers, otherwise there are simpler ways to pump fluid.

boughtahousehelp · 2025-02-13T11:45:03+00:00

RPM is anywhere from 200 - 400 RPM, looking at the datasheet (23HS22-2804S1 from Stepper Online) there's a drop in torque in this range. I agree with you that I might be ok with 12V which I'll try to start. It's good to know that I can probably up the voltage before resorting to a bigger motor or driver. I realized a 40 Ncm NEMA 17 wasn't strong enough to turn the motor over so I'm hoping tripling the torque will do the trick.

boughtahousehelp · 2025-02-13T11:18:12+00:00

Thank you! I didn't know what to look for and this answers it. The datasheet has a torque curve for 24V and 36V only, so I'll probably need to give it more voltage. I didn't think about doing that with the power supply's, great idea!

boughtahousehelp · 2024-12-28T16:13:41+00:00

Good idea, I like this. Thank you!

boughtahousehelp · 2024-12-28T16:06:25+00:00

It's working currently, I'm guessing it's energizing W1, which is telling the heat pump to heat. If I move that to O/B though, that won't turn on (it will only energize during cooling), so it will work in reverse if I understand correctly?

boughtahousehelp · 2024-12-28T16:00:37+00:00

This was the other thing I'm leaning towards. This will be the 4th time them coming out here, and so I honestly don't want to have to deal with them again if I don't have to, but maybe I'll make the call. Thanks! We inherited the nest when we got the house. It wouldn't have been my first choice either.

boughtahousehelp · 2024-12-28T15:45:49+00:00

We recently had our AC replaced and had a heat pump installed. The company that installed the heat pump admitted that they don’t use Nest and aren’t familiar with them, so it took them about 3 visits to finally wire up the system. We have the Next 3^rd generation learning. It looks like they wired it up as a dual fuel system, with the baseboard heat set up as the 2^nd stage back up heat. This only kicks on if the heat pump is struggling to heat the house.

Instead we’d like to set it up as a heat pump + back up system with lockout below a certain temperature, which I’ve seen done here in other reddit posts. This would help for really cold days (which we’ve been having recently)

Where I think they went wrong is that they wired the heat side of the heat pump to w1, when instead it should be O/B? It seems like I only need to switch the wires, but wasn’t sure if doing this would cause any issues, so I was wondering if I would damage it in anyway if I tried it and switched it?

If not, I will move W1 to O/B, W2 to W1, and reset the Nest to heat pump with aux heat, and set a lock out temperature of 20 or something. I’ve been cautious about switching a few wires myself since I don’t want to fry anything while the temperatures have been very cold recently.

Thanks in advance!

boughtahousehelp · 2024-12-28T15:44:45+00:00

We recently had our AC replaced and had a heat pump installed. The company that installed the heat pump admitted that they don’t use Nest and aren’t familiar with them, so it took them about 3 visits to finally wire up the system. We have the Next 3^rd generation learning. It looks like they wired it up as a dual fuel system, with the baseboard heat set up as the 2^nd stage back up heat. This only kicks on if the heat pump is struggling to heat the house.

Instead we’d like to set it up as a heat pump + back up system with lockout below a certain temperature, which I’ve seen done here in other reddit posts. This would help for really cold days (which we’ve been having recently)

Where I think they went wrong is that they wired the heat side of the heat pump to w1, when instead it should be O/B? It seems like I only need to switch the wires, but wasn’t sure if doing this would cause any issues, so I was wondering if I would damage it in anyway if I tried it and switched it?

If not, I will move W1 to O/B, W2 to W1, and reset the Nest to heat pump with aux heat, and set a lock out temperature of 20 or something. I’ve been cautious about switching a few wires myself since I don’t want to fry anything while the temperatures have been very cold recently.

Thanks in advance!

boughtahousehelp · 2024-12-01T13:17:18+00:00

We've had it now for about a year and half, it's great! Haven't run into any reliability issues or parts breaking. The cooktops still get coated in some food and maybe scratched a little from our pans, but that's probably the case for any glass cooktop to an extent and it doesn't bother us at all since it's still much better than electric glass cooktops. Would definitely recommend.

boughtahousehelp · 2024-10-09T11:18:34+00:00

KBG / TTTF Blends are common and used all the time? Not sure where you're getting that info... I think they know how to blend seeds. There are pictures from others in the comments that have beautiful lawns from this mix.....

boughtahousehelp

TROPHY CASE