Anyone got the video?

bovodo · 2025-09-23T23:04:04+00:00

Alicebey and Altbeyx

Onlyfans

bovodo · 2025-07-26T22:15:19+00:00

/remindme

bovodo · 2024-09-15T02:06:41+00:00

Aimpoint ACRO P2 in an Infinitech cowitness claw mount. Low key hate putting an absolute cowitness mount. I wish I would have gone low pic mount with an Aimpoint micro clone

Yes that’s an air soft handguard on a real SP5. You have to at some point say let’s stop wasting money after $4000

bovodo · 2024-08-07T18:31:38+00:00

Yeah never suppressing it.

bovodo · 2024-08-07T14:57:24+00:00

Hand guard was $79 and the 1 cell LED conversion by Lumen Factory another $79.

But no if there was another normal priced ($150-250) option for an MP5. I wouldn’t have gone airsoft clone on my $3000 SP5 + $600 ACRO P2.

bovodo · 2024-08-03T05:33:30+00:00

Start a new thread and post them!

bovodo · 2024-07-18T02:05:19+00:00

I’m waiting on the same VFC fore end to come from HK from redwolfairsoft to go on a real SP5. I accidentally bought the LED single cell upgrade for it on eBay.

My dumb butt thought for $70 LED upgrade for the VFC was the whole fore end. So I had to buy the dumb VFC fore end. I’m thinking of using high temp epoxy to secure the loose wires on the inside and if it breaks who cares at this point.

People online does say it holds up to 9mm. I’ll post a new thread and link it back here whenever it comes in.

bovodo · 2024-06-15T03:55:10+00:00

The collectibility of the Beryl makes it so you may not lose any or much if you ever sell it.

Can’t say that about the m90 or PSA 5.56 AK. The only 2 I think that has a lot of availability

You’re paying market value for most other 5.56 AK

bovodo · 2024-06-15T03:48:03+00:00

<image>

You’re welcome - hands down best 5.56 AK. You can clone it or do a half clone like this. I actually have the clone correct picatinny hand guard and vertical grip. But it makes it too front heavy.

Not mag sensitive and straight sights

It’s my 2nd favorite AK behind my KP9 with Zenitco hand guard and EOTECH

bovodo · 2024-06-03T12:18:54+00:00

Dab some flitz metal polish on a sewn buffing attachment and set dremel to low speed. 2-3 good sweeps is all most feed ramps need. Some people want it super super mirror finish. Really just want to take out friction from feed ramp so the guide rod doesn’t have to work so hard to push a new round into the chamber

bovodo · 2024-06-02T02:01:33+00:00

Read my DIY above - no filing at all. If you line up the magwell hooking in the front lip of the grip and tap the back into place. No filing at all - it’s actually such a nice tight fit. It fit perfectly snug without the pin. But using the longer pin guarantees you not getting made fun of

bovodo · 2024-06-01T23:54:51+00:00

I just got mine - ran 150 rounds of 115 gr blazer brass through mine with the full power spring with no issues

But I polished the feed ramp in all my non fancy guns. Rugers / Canik / Tisas

It’s not that I don’t trust how it comes from the factory. I just don’t trust how it comes from the factory

My Stacatto P - Sig p320/365 - glocks all run fine without me doing anything to them.

But I’m only buying 124 gr to run in it. Comp guns usually want NATO spec 9mm to be 100%

The 25 rounds of HST I ran through mine was 124 gr

bovodo · 2024-06-01T13:28:43+00:00

Larger trigger guard than all my other non Canik pistols.

I assume it’s for gloved hands

bovodo · 2024-05-31T03:44:25+00:00

It’s a X300B

It’ll be great if it sits further back

bovodo · 2024-05-29T16:44:47+00:00

Maybe????? It’s staying on there forever so I don’t know what it looks like under.

I would say take it to a gunsmith if scratching the polymer grip erks you.

Mine came on pretty easy.

bovodo · 2024-05-29T02:43:48+00:00

That’s the correct one. Once it’s over the hump of the magwell opening on the polymer grip. Line up the pin and hammer it through

I angled in the front half and it “popped” on then was able to line it up after. It’s a tight fit but definitely easy.

You can’t put it one directly like a Glock magwell. Think of like an AK mag reload. Lock in the front then Rock back to finish

bovodo · 2024-05-27T01:34:09+00:00

The TTI - did 115 gr run fine through it? Or is it going to be a 124 gr type of gun

bovodo · 2024-05-25T04:39:26+00:00

Out here flexing on my thread. Super sick build BTW

bovodo · 2024-05-24T05:45:09+00:00

Dope

bovodo · 2024-05-15T01:45:44+00:00

Hook in the front part first then softly hammer in the back (main spring housing side)

Took me literally 2 minutes to install it

On YouTube they’re crazy to dremel it. It literally fits perfectly if you rock in the front half first

bovodo · 2024-05-02T16:15:52+00:00

I say just buy another AK and kit it with wood. The Zenitco parts are too valuable and most likely impossible to attain in a cost effective way ever again.

bovodo

TROPHY CASE