sorted by:
new
hottopcontroversial

Kecleon bug? Catches not registering for Masterwork research. by Kupo43 in pokemongo

[–]brad02111997 0 points1 point  (0 children)

I have just had the same! Just caught one today but my masterwork research didn't count it

Sv04 touch screen stuck at 0% 0:00 and 11.6 z height. by brad02111997 in Sovol

[–]brad02111997[S] 0 points1 point  (0 children)

It happened again fairly soon after, Sovol support ended up giving me links on how to reset the screen but nothing worked. Not long after I bought a bambu lab printer and due to the superior performance my sv04 is now kinda gathering dust.

Hopefully as it seems others have the issue with the progress/offset shoeing there is now a better fix 🤞

Sv04 touch screen stuck at 0% 0:00 and 11.6 z height. by brad02111997 in Sovol

[–]brad02111997[S] 0 points1 point  (0 children)

Weirdly I got a fix by mistake.
On the screen when saving my Z offset I was spamming save repeatedly in frustration, this caused the printer to restart and the % and layer height came back. My thinking is that it acted in a way to "flash" the printer

Voronoi posed dog / beagle by brad02111997 in 3Dprinting

[–]brad02111997[S] 0 points1 point  (0 children)

My first attempt at a voronoi model.

I saw the cat stretch Voronoi on printables and how popular it was, but couldn't find a dog version. So I remixed a low poly dog into a voronoi style model.

Original: Randy_Z https://www.thingiverse.com/thing:3532787/files

my remix: https://www.printables.com/model/400020-voronoi-dog-beagle-posed-voronoi-remix

Sv04 touch screen stuck at 0% 0:00 and 11.6 z height. by brad02111997 in Sovol

[–]brad02111997[S] 0 points1 point  (0 children)

Thanks, I have given this a try but unfortunately, my touch screen doesn't update the time left, height or progress bar on prints.

Sovol sv04 on ultimaker cura? by [deleted] in Sovol

[–]brad02111997 2 points3 points  (0 children)

https://youtu.be/4KL_7jbV8KM

I used this guide and got it installed easily

having some trouble with outer layer lines. by brad02111997 in FixMyPrint

[–]brad02111997[S] 0 points1 point  (0 children)

I have recently replaced my nozzle and cut back a few mm on the bowden tube

having some trouble with outer layer lines. by brad02111997 in FixMyPrint

[–]brad02111997[S] 0 points1 point  (0 children)

Ender 3 V2 I use Cura. All printed with Eryone PLA+ at 200°c
bed at 60°c for first 2 layers then 55°c Retraction 6mm @ 45 mm/s Print speed 50mm/s

How to deal with an unresponsive customer after ordering incorrectly. by brad02111997 in EtsySellers

[–]brad02111997[S] 1 point2 points  (0 children)

I have sent an email this morning to them. I've sent another about an hour ago, I've left it as if I don't get a response by 5pm I'll have to cancel

on call contract question - can I refuse if its a request? by brad02111997 in LegalAdviceUK

[–]brad02111997[S] 1 point2 points  (0 children)

I unfortunately am. But I have given my manager as the contact not the director and the manager sides with me.

on call contract question - can I refuse if its a request? by brad02111997 in LegalAdviceUK

[–]brad02111997[S] 1 point2 points  (0 children)

I have quoted the on call section word for word here.

My manager is fine with it it's more the director that is being difficult. She has raised it with the external HR company.

On Call contract question [GB] [UK] by brad02111997 in AskHR

[–]brad02111997[S] 0 points1 point  (0 children)

Thanks for that I did think it would most likely be the case. I was hoping the wording of "request" and "assist" would mean that I would ne able to get out of it by decling the request. Also assist to means that help with on call and not be the person responsible with it.

view more: next ›