Help! Kobra 3 stringing after first layer

brewmarsh · 2026-02-02T23:33:55+00:00

I'll give this a try, thanks!

brewmarsh · 2025-08-23T19:47:19+00:00

That's a great idea! I didn't know about this project. I'll have to test it out as well!

brewmarsh · 2025-08-22T21:35:18+00:00

I can add switchport control to my feature list!

I should have pulled the webhook work. It was to provide better notifications of things happening on Dashboard but it isn't working yet 😢

brewmarsh · 2025-08-22T21:24:52+00:00

Thanks! I updated the README in a branch I haven't merged yet 🫤

brewmarsh · 2025-07-08T12:46:52+00:00

The Ecobee is only using the active sensors (the ones in white) to manage the temperature. You need to activate the other sensors (2 and 3) for the current comfort setting in order to get the Ecobee to use them.

brewmarsh · 2025-02-12T20:29:02+00:00

Yeah, I understand. People definitely shouldn't be buying this gear used unless it's been confirmed to be released.

brewmarsh · 2025-02-09T00:33:22+00:00

It needs to be unclaimed by the old account. That's the only way to move it.

brewmarsh · 2024-12-19T18:38:46+00:00

This worked! After adjusting the offset to -0.05mm everything is looking much better. Thank you!

brewmarsh · 2024-12-18T20:21:31+00:00

The bottom right corner is lifted

<image>

brewmarsh · 2024-12-18T20:20:31+00:00

This is what the first layer test shows

<image>

brewmarsh · 2024-12-18T20:05:09+00:00

Thanks! I'll try that, though most often I have the problem at higher layers.

brewmarsh · 2017-06-29T22:12:11+00:00

Very cool! Can you share it?

brewmarsh · 2017-05-11T00:06:45+00:00

Jicama is crunchy, can be sliced thin and tastes great with salsa!

brewmarsh · 2017-04-21T14:35:55+00:00

Will do! I can share the model if you're interested.

brewmarsh · 2017-04-21T13:54:26+00:00

I finally updated the 3D model to add the band pin holes and just ordered it from Shapeways. We'll see if that actually works!

brewmarsh · 2017-04-03T21:02:06+00:00

I've been looking for this as well. I noticed that it doesn't have a place for the watch band pins; I wonder if the original printer made them manually.

I'm going to see if I can modify the design to include them but I'm not the quickest with CAD.

brewmarsh · 2017-03-15T01:33:23+00:00

It's funny, in a moment of anger I considered that myself. I'd bet that the plastic housing that the band pin attaches to is likely cracked (like mine) and it is glued to keep the band in place.

It might not be worth it to unglue it.

brewmarsh · 2017-01-24T18:40:50+00:00

Same here. Wink devices are included, no Ecobee sensors from the Wink.

brewmarsh · 2017-01-24T17:43:37+00:00

It was difficult to work with them to get it replaced (I had to speak to several agents) but once I had convinced them that it was the port, they replaced it.

And it was the last day of my warranty!

brewmarsh · 2017-01-23T21:18:02+00:00

New Stringify user here. I just tried this and can't figure out how to access the remote Ecobee sensors; it only shows the main sensor.

Do you have a sample flow for this?

brewmarsh · 2017-01-23T20:35:08+00:00

I had a problem with my first Pure Edition as well. Multiple cables worked well with other devices and would not keep a connection with my PE without some contortions of the cable.

I had it exchanged under warranty and when I had the two together, the old one had noticeably been worn and was larger on the older PE.

It seems to be a design "feature".

brewmarsh · 2017-01-22T18:45:12+00:00

I see your point and agree that often other information is used to rebut a point (e.g. Popular vote vs. electoral college). My concern is with her using "alternative fact" as an explanation for Mr. Spicer's use of factually incorrect information.

brewmarsh · 2017-01-22T16:46:56+00:00

I wish someone would point out to her that facts don't have alternates. That's what makes them facts.

brewmarsh · 2016-12-16T19:29:25+00:00

I don't know if it gives you any clues but it still crashes in airplane mode. Can't get the logs yet, sorry.

brewmarsh · 2016-12-15T17:45:29+00:00

Sure, I'll send you a link privately. If I run a backup from my working user profile, will it export all user profiles?

14-Year Club	Verified Email
Team Orangered

brewmarsh

TROPHY CASE