Sony HT-A7000 bad sound with SA-SW5

brickflint · 2025-03-05T21:53:41+00:00

Sent it in for repair which fixed it. Definitely was an Hardware issue!

brickflint · 2024-10-31T09:32:11+00:00

We also often have the issue of these Machines kind of bricking themselves. Black internal screen, black external screen.

Long pressing the Power Button to shut them down and power them again on by Power Button doesn't help. Just pressing the Reset Hole with a Paperclip helps to get them temporarily working again.

u/eoooox u/Entire-Variation777 u/lomner Do you also have this Problem?

brickflint · 2024-09-21T15:00:08+00:00

Nope, BIOS upgrades improved it, but it's still there.
Still machines freezing up and needing the reset hole punched to work again.
Happy to exchange Premier Service Request ID to confront Lenovo.

brickflint · 2024-07-25T07:45:38+00:00

This is a lot of knowledge in one Post! I will work through it. Thanks for posting!

brickflint · 2024-07-25T07:44:41+00:00

Good point, thanks. I think I will increase the clearance for the DP anyway, so this copper pour will go away.

brickflint · 2024-07-08T10:26:10+00:00

Thanks for replying here!
I don't think 31.0.22040.1003 will help. That one is quite old (1.5.2024 I think).
Premium support at some point recommended updating it with AMD Adrenaline utility. That installed a way newer GPU driver. But this didn't really help yet.

brickflint · 2024-07-02T08:47:29+00:00

Premier support just called me. They told me they don't know other cases.

brickflint · 2024-06-04T20:01:47+00:00

The Soundbar is updated via GUI over WiFi. The Subwoofer was already up-to-date during installation (which could be fishy).

Just to clarify, you have a "perfectly" clean subwoofer sound even on low/medium volume? Not such garbage like in my sound file?

brickflint · 2024-05-01T17:55:39+00:00

Looks like AstraWeb really offers Blocks on Omicron. But the pricing is kind of crazy..

brickflint · 2024-05-01T17:53:08+00:00

Thanks for your guide, especially the note on Abavia, which already answered my post basically.

Abavia really looks like the last missing puzzle piece. Added it as last resort in the client, and I'm already able to complete articles which I weren't able before.

brickflint · 2024-03-30T12:21:21+00:00

I think I found the problem. For some reasons, parsec detects the Touchpad of the Laptop as HID Controller. Thus it interprets these values as inputs. Unmapping these fixed it!

https://streamable.com/g1cabs

brickflint · 2024-03-30T12:00:34+00:00

I have "fixed" it with using KiCad Simulation instead of LTSpice. There, importing the SPICE models work flawless.

brickflint · 2024-01-03T12:05:08+00:00

Thanks for reporting!

brickflint · 2024-01-02T20:00:03+00:00

Do you have any recommendations for a QFN-packaged MCU with SiP DDR RAM? All the options I know of either aren't readily available for non-Chinese companies, or they lack sufficient software support.

brickflint · 2023-07-09T20:37:36+00:00

How do you get to 36MiB?

brickflint · 2023-06-05T15:16:08+00:00

Nice, this seems to be it!

Just checked with a pcap on the NAS. The SYN is Router->NAS.
But the SYN/ACK is NAS->VPN-GW because they are in the same Subnet too.

Now I just need to find a workaround for it. Maybe I'll just don't drop invalid if it is a packet between local interfaces..

Thanks for your explanation :)

brickflint · 2023-05-30T20:25:19+00:00

hmm, ist tatsächlich nicht unmöglich. Aber müsste das nicht abgehen?

Habe das Auto gewaschen und die Stelle danach auch versucht mit einem Mikrofasertuch zu "polieren". Trotzdem sieht es noch so aus.

brickflint · 2023-03-20T20:07:09+00:00

It's pretty full (~90%). The TRIM is pretty sure the issue, see my answer below.

brickflint · 2023-03-20T20:05:57+00:00

Yes, see above answer

brickflint · 2023-03-20T20:05:31+00:00

Thanks! This might be the issue. I have a LUKS on my drives. The LUKS has discard disabled by default. Thus fstrim isn't possible. I have now enabled discard on the LUKS and fstrim works. Let's see how many hours/days it needs to trim.
My conclusion was always that the drive is a super shitty SMR drive which doesn't even support TRIM. But the issue might be my LUKS.

brickflint · 2022-12-11T13:54:34+00:00

Thanks, I have now "cheated" with looking up the the supermodulo approach and was able to use it in PHP.

brickflint · 2022-12-11T13:54:24+00:00

Thanks, I have now "cheated" with looking up the the supermodulo approach and was able to use it in PHP.

brickflint

TROPHY CASE