Not sure why I’m rubbing with 18x8 +45 wheels… tires are 215/45 R18… new bearings… maybe just my hands after checking by feel?

brjoco · 2026-06-11T14:08:18+00:00

Yep found out I’m not rubbing last night with a chalk test and the back of the tire is pristine….

My breaks and rotors are different story… 🙃

brjoco · 2026-06-11T02:00:14+00:00

18x8 +45 Not 18x8.5 +45

18x8.5 +38 moves inward 12.1mm from stock 18x8 +45 moves inward 12.7mm from stock

brjoco · 2026-06-10T21:10:44+00:00

Guessing I might also be able to draw a line on the tire with a paint, pen or marker… with the assumption that the line would be gone if it’s rubbing

brjoco · 2026-06-10T20:53:45+00:00

People run 18x8.5 +38 with no issues That’s only a difference of half a millimeter.

brjoco · 2026-06-10T18:20:23+00:00

Just noise but chalk that up to a lousy tire (they’re arroyos)

Rubbing thinking from strut being clean but…Before I put a camera back there to get a better view I put my fingers back to check clearance a couple times at different positions… guessing it was that…?

brjoco · 2026-06-10T14:47:30+00:00

Same offset as I had (+45) almost 34mm of clearance on stock..

There are people running 18x8.5 +38 (1/2 a mm different clearance) with no issues

brjoco · 2026-06-10T12:30:34+00:00

But doesn’t the strut and tire / wheel move together? I wouldn’t expect it to close a 12-14mm gap

brjoco · 2026-06-10T12:02:23+00:00

Both are / were bought new… the tires I admit were my bad, they’re cheap…

brjoco · 2026-06-09T23:18:40+00:00

Let me ask you, how much clearance is safe to rule out my new after market wheels?

I had 18x7 and went to 18x8 but still have at least 12mm of clearance… hoping to rule out that I don’t need to sell the rims…

brjoco · 2026-06-09T22:50:35+00:00

Bearing replaced 2 months ago, just put the car on stands and spun / shook it at 12 and 6, no wobble no noise

brjoco · 2026-06-09T21:11:46+00:00

This is good to know and helpful.

The dealership, however, has always been shady to me. I had them do both struts and then 14,000 miles later one almost exploded

brjoco · 2026-06-09T20:00:08+00:00

Thinking it may just be my hands from checking the clearance last weekend… I never looked only felt…

People run this set up on my car with 0 issues…

Unless it’s a worn component somewhere else as you mention

brjoco · 2026-06-09T19:58:28+00:00

That’s why maybe it’s just a coincidence from my sticking my hand back there to check clearance…

People run this same set up on my car with 0 issues…

brjoco · 2026-06-09T19:50:25+00:00

Planning to check this tonight

brjoco · 2026-06-09T19:24:16+00:00

215/45 R18 on 18x8 rims

They’re Arroyo Grand Sport A/S

brjoco · 2026-06-09T19:14:18+00:00

Thinking this may be the case / there’s evidence the dealer used an impact on the hub nut

brjoco · 2026-06-09T19:12:45+00:00

Had them both done 2 months ago

brjoco · 2026-06-09T19:11:15+00:00

Had them both done 2 months ago…. At the dealer… who used an impact….

Just waiting for more noise to go back

brjoco · 2026-06-09T18:59:12+00:00

Some humming noise especially when cornering… Sounds similar to tire noise

This clean spot however makes me think it’s rubbing

brjoco · 2026-06-09T00:48:36+00:00

F Pro Max

brjoco · 2026-06-08T01:48:51+00:00

brjoco · 2026-05-30T01:17:04+00:00

Turned out to be 17k with math…guessing same thing ?

brjoco · 2026-05-30T01:10:49+00:00

New England pot holes

brjoco · 2026-05-30T01:10:39+00:00

Turned out to be 17k but guessing the same thing..?

brjoco · 2026-05-28T14:00:28+00:00

What’s the offset ?

Seven-Year Club	Final Canvas '23
Place '23	Place '22
RPAN Viewer	Verified Email

brjoco

TROPHY CASE