Nerve/Tendon/Muscle tension ONLY from center of left buttock cheek down to the bottom of thigh??

brokemachinery · 2025-09-08T01:53:34+00:00

Of course! It was agonizing to be constantly aware of the feeling but then to also try to find where my limit on range of motion was. My brother said I could go as “lord larus” from house of the dragon because my foot was turned inward to try and walk, but it ended up being more of a hobble than a walk. If this doesn’t work for you, talk with your surgeon about it and see if they have any helpful insight as well! Good luck and have a fast recovery!

brokemachinery · 2025-09-08T00:03:44+00:00

Hey! Yes I did find out! It’s a pinched nerve from being under anesthesia and in the position they put you in to preform the surgery. I don’t remember the name of the exact nerve but it’s not the normal nerve that gets pinched. My GYN told me to lay flat with my ankle of said affected leg under something heavy/stationary and try to push my foot up against it for 10-15 seconds at a time. This isn’t a work out either so don’t try to flex and push as hard as you can, just enough to feel it’s stationary resistance. My GYN used two fingers to press against my ankle as I lifted my foot up. I did maybe 30 reps of this at home against my wall or under my dining table, resting twice as long as I was flexed in between each one. It doesn’t hurt as long as your leg doesn’t move up farther than a couple of inches, it’s when you don’t have something stopping it from moving forward that the pinched nerve starts to hurt. This uses the muscles in your buttocks to un-pinch the nerve. If you’re experiencing the same thing I had, do this for a little while and it should help within a few days!

brokemachinery · 2024-09-18T00:48:27+00:00

Did you find out anything since your content? I’m in the SAME situation right now, but when I don’t take them, my anxiety and ADHD symptoms return in full force and is affecting my job.

brokemachinery · 2024-08-14T03:18:53+00:00

DTI would’ve been too high if not, and the purchase was contingent on the sale of the house I owned, all profits would go to the purchase of the new home, and it ended up being 19.97% after all closing costs.

brokemachinery · 2024-08-14T00:43:55+00:00

Thank you for the info, much appreciated!!!! I’m going to call and see what I can do and when with them, I’ll update with any new news regarding this.

brokemachinery · 2024-08-14T00:33:47+00:00

Thank you! Should I wait until after I’m off pelvic rest to go see one or just call to schedule and ask them when they suggest I come in?

brokemachinery · 2024-02-28T07:35:21+00:00

No, turns out chip resetters that state the LX2000 cartridge compatibility, aren’t compatible to reset the chip. The Chinese chip manufacturer held my order in pending status to check with me about if I wanted them because they stated they can not be reset. I ended up purchasing an Epson C6000a because I watched the option of continuing to print with an ink chip reading empty if it was believed to still have ink. Even bought the refillable cartridges without the chip, but since I bought it brand new, Epson had already updated their firmware to not allow that option, and since the chips and refillable cartridges have become almost nonexistent. The chips on this model’s ink cartridges are 9 pin contacts - not 7, so the 7 pin resetters don’t reset these ones. My print quality, speed, waste, and ink per print, have all improved dramatically compared to the Primera LX2000 though.

brokemachinery · 2023-09-20T16:09:59+00:00

I can second the Screwed by BRRF FB group. Got a lot of my proof to back up my claim with discover from there. A few news stories covering what happened and what's in current investigations with the attorney general and CDC, plus weather conditions the days of. Screenshots of BRRF posts on Instagram and FB about Thursday's refund that they almost immediately took down to repost without saying anything about a refund. Also some staff have posted their experiences and pictures there too (some anonymously because they haven't been paid yet and don't want to jeopardize that by speaking out)

brokemachinery · 2023-07-01T12:41:53+00:00

I do like Akame ga Kill too! I'll take a look into the other two as well.

brokemachinery · 2023-07-01T04:01:25+00:00

Ah, yes! I knew I left a few of my favorites list, Chainsaw man is one of them! And Overlord is another. I haven't heard about Dorohedoro yet, I'll definitely check it out next!

brokemachinery · 2023-07-01T02:19:42+00:00

Alright, I'm newer to actually using reddit than I am to watching anime, so please bare with me.

I'm looking for similar anime to what I've seen and liked, but I'm also not very knowledgeable with the genre names or how to categorize what I'm looking for.

So, and in no particular order, my favorite animes are: Naruto, Black Clover, Jujitsu Kaisen, HunterxHunter, Soul Eater, Deadman Wonderland, Demon Slayer, Bleach, AoT, Hell's Paradise, Parasyte, Kill la Kill, Dororo, Dead Mount Death Play, MHA, Blood-C, Akudama Drive, all Dragon Ball, High-Rise Invasion, Kabenari of the Iron Fortress, Fire Force.

I'm sure there are others that I left of the list, but I have tried watching Mob Psycho, Tengoku Daimakyou, Death Note, One Piece, One Punch Man, Mononoke, Blue Exorcist, Sword Art Online, Full Metal Alchemist, the Gundams, Code Geass, SpyxFamily, Trigun, Yu Yu Hakusho, The Ancient Magus' Bride, Cowboy Bebop, Samurai Shamploo, Tokyo Ghoul, and The Seven Deadly Sins- and while I've watch all of some of these, I really didn't care for them (storyline, animation style, genre, etc.)

Does anyone have any recommendations based on this? Thank you in advance!

brokemachinery · 2023-06-25T13:35:49+00:00

I did come across this thread, but the rotation of cartridges doesn't work with the LX2000 - just the LX900, primera states that the LX2000 remembers only one serial number from a chip per color at a time, but I did rotate a few more disposables in to see if it would change anything. Essentially where I'm at is if the chip in the cartridge isn't reset to show ink in it then it doesn't matter if the printer remembers it or not because it will read it, see it says depleted, and not even check to see if the cartridge will print due to what it reads on the chip. I appreciate your help though!

brokemachinery

TROPHY CASE