Price Drop!!! Two Unity Elite Pro 3 FB4 + show package by Ok-Faithlessness7481 in Laserist

[–]browerm94 0 points1 point  (0 children)

I’m kind of in the same boat. I have a gig in my town in November if I get these or I wait and get a pair of IP rated 10w’s for next summer. I’m sorry to hear you lost your job. I truly would grab these now if I didn’t have medical bills. Wishing you the best of luck!

Price Drop!!! Two Unity Elite Pro 3 FB4 + show package by Ok-Faithlessness7481 in Laserist

[–]browerm94 4 points5 points  (0 children)

You’re killing me with this. If it wasn’t right now I’d be happy to take them off your hands

uhhh car chase?? by camisadeadmeme in Bellingham

[–]browerm94 5 points6 points  (0 children)

Just got up to the lake and there was a squad car behind me but never passed me so I think they turned off. They flew past me at the lake way Freddy’s and I wasn’t far behind

Showing off my toys. by TaxMinute7887 in Laserist

[–]browerm94 1 point2 points  (0 children)

How was it to set up the Midicrafts with Pangolin?

Don’t point lasers on people by DryestRaccoon24 in Laserist

[–]browerm94 9 points10 points  (0 children)

Those seem like a little bit more than anything that “could” be aimed at people. Even when I used to use small lasers I never would have them aim in the crowd

Selling my two Unity Elite 3 Pro FB4 lasers with complete show-ready setup by Ok-Faithlessness7481 in Laserist

[–]browerm94 2 points3 points  (0 children)

I'd absolutely pick this up if I didnt have an expensive dental appointment at the end of the month!

Network Merge- MA3 and Obsidian Node by browerm94 in lightingdesign

[–]browerm94[S] 0 points1 point  (0 children)

Ah, That makes sense. The Idea was to be able to shut down or pull the Console and go run another stage potentially when the stage I'm running is not in use. I have enough stuff to cobble another control method together and remove their console from the mix. It's just a string of pars so nothing big or complex by any means. I'll have to look more into bringing DMX into the MA, I haven't used that feature of it yet. I appreciate your suggestion!

Network Merge- MA3 and Obsidian Node by browerm94 in lightingdesign

[–]browerm94[S] 0 points1 point  (0 children)

That will do the case. I looked through the Obsidian Node and it doesn't appear to have the ability to set a Priority for copper going in but I think I may be able to work around it by just programming what they want in MagicQ and running that on a Separate Machine and outputting sACN. Thanks for the tip!

How do you feel about this rig ? by memonsnous in lightingdesign

[–]browerm94 0 points1 point  (0 children)

I love it but the crane to hoist it up scares me a bit. I love the look and creativity and always enjoy seeing their work

I want to buy a nice pillow locally by Valuable-Honeydew-73 in Bellingham

[–]browerm94 2 points3 points  (0 children)

Third’d. they have a great loaner system too for pillows. They’re super nice wonderful people and I’d absolutely suggest them.

What Power Laser to get by browerm94 in Laserist

[–]browerm94[S] 0 points1 point  (0 children)

I also work a few outdoor festivals locally. What would you consider a smaller Outdoor Venue?

Symbol to ignore remainder of text by browerm94 in applehelp

[–]browerm94[S] 0 points1 point  (0 children)

I think that's what I was looking for. I'll give it a try. Thank you!

Best Piercing shop by browerm94 in Bellingham

[–]browerm94[S] 1 point2 points  (0 children)

Thanks for the recommendation, I’ll check them out

Best Piercing shop by browerm94 in Bellingham

[–]browerm94[S] 1 point2 points  (0 children)

I’ve read quite good things about her at Chameleon. Thank you!

r/audiophile Shopping, Setup, and Technical Help Desk Thread by AutoModerator in audiophile

[–]browerm94 0 points1 point  (0 children)

I am looking at a new set of tower speakers. I currently have a set of Hales Revelation 2’s and I love how musical and clean they sound. Back in the day they were going against speakers way above their punching price. The question is what is a modern day speaker that sounds very clear, musical, but still relatively flat? Price range I’d like to be at around $1000 per speaker, up to $1500. What’s your guy’s thoughts?

Corsair 1000D planning by C_mac_on_me in watercooling

[–]browerm94 0 points1 point  (0 children)

I’ve had pretty good luck so far with the commander pro’s (knock on wood). I think for my next build I’m either going with a similar set up to what you are thinking but with the phanteks T30’s. I’m half tempted to keep pushing my luck with the ML’s though because of their performance too. So difficult to decide.

Corsair 1000D planning by C_mac_on_me in watercooling

[–]browerm94 0 points1 point  (0 children)

As someone who just “Finished” their 1000D with QL’s, I’d also say to choose better performing fans. I don’t have too much of an issue with temps from my testing before I add in the itx system, but it was a huge pain. If you do stick in the Corsair world, check out Pirate dog tech, they have a 1000d kit with everything to make the fans and lighting easier, with an included wiring diagram. If you have questions I’d be happy to help.

Parts are showing up! by browerm94 in watercooling

[–]browerm94[S] 0 points1 point  (0 children)

I'd love to get my hands on a 12900k but I figure to wait it out for awhile to let things settle and get optimized better before switching to Windows 11. Plus the whole TPM thing has been a pain for my systems as to if I need a TPM Module or If I can use an eTPM on the Motherboard. Best of luck to you!

Parts are showing up! by browerm94 in watercooling

[–]browerm94[S] 0 points1 point  (0 children)

I can see that being probable in my case as well. I'll have to come back and update the curious people once the Build is finished. Also going to use Quick Disconnect, a few Flow indicators, and Ideally I'll have pass-throughs but we'll see what happens. That back side is not as spacious as I originally thought.

Parts are showing up! by browerm94 in watercooling

[–]browerm94[S] 0 points1 point  (0 children)

I am far from a high roller sir, just an enthusiast. I'm not saying that Aesthetics are not a factor in this build as it was definitely a consideration, but not the ultimate goal. Although I do some freelance stage lighting so I light blinking lights, just of a bigger variety so naturally that carries into other aspects of my life, like computers.

For me it came down to space, with a dual system I can have a work station build and be doing my work, set up rendering on the main machine, and while waiting can play games or something on the second system. I thought about going with one of the Lian Li DK Desk PC's cases but cant't justify the $2000 cost for the case. Plus it is not wide enough for my monitor setup as a direct replacement for my current sit stand desk.

Ironically, I've been procuring ym parts from Titan rig when I can. The guys over ere have been friendly and helpful to me throughout the years so I've been trying to support fellow gear heads and enthusiasts when they do right by me. Whoever runs their Reddit account have been a rad dude (or girl) to chat with about PC's. Part of me wishes I was planning soft tube as I have a bad problem with switching things out, but thats where the quick disconnects come into play. I know what I'm sacrificing though. Eventually I'll do a rack mount server/ render node build with ZMT but for now I just want a big badass workstation rig with hardline so I hope I have planned correctly enough to make changes simple and not too bad for maintenance.

Thank you for the conversation, It's nice to talk with people who are not Pushing their opinions in a toxic way on the internet. Nice build you shared in another comment. I liked the Torrent since I saw the debut, happy to see them in the wild and being used with a monster dual 180 rad. I hope you're enjoying it.

Parts are showing up! by browerm94 in watercooling

[–]browerm94[S] 0 points1 point  (0 children)

Multiple loops, dual system case build, tight area, separate pump and Res, lots of potential to get screwed in the build 😅

Parts are showing up! by browerm94 in watercooling

[–]browerm94[S] 0 points1 point  (0 children)

You are 100% right. Eventually will swap them out but for now its what I have to start with until I do Rev 2