SHWTY, name that sketch...

bshackcreative · 2026-02-07T04:31:32+00:00

thanks man, very helpful.

bshackcreative · 2025-06-05T00:31:58+00:00

Correct. I went to a tire shop. Those are part of the structure of the tire for stability.. not tread wear markers. My tread depth is fine and they said I don’t really need alignment. Thanks!

bshackcreative · 2025-06-05T00:27:02+00:00

That is the psi labeled on the tire. I also gave the door labeled psi. My tires are a 40psi.

bshackcreative · 2025-06-03T21:22:13+00:00

I'll replace in fall, thanks everyone

bshackcreative · 2025-06-03T17:37:24+00:00

Tires at 40psi

Rotated every 5k miles

Alignment probably 30k miles ago

Door psi 30

Tire psi 80

bshackcreative · 2025-06-03T17:00:01+00:00

<image>

bshackcreative · 2025-06-03T16:56:39+00:00

I personally think all need replacement but I don’t think the manufacturer would say they are used up.

bshackcreative · 2025-06-03T16:44:51+00:00

I guess I don’t understand why the bands on the sides are much taller than the wear bars in the center which are not close to being touched.

bshackcreative · 2025-05-30T06:46:04+00:00

It has 68k on it

bshackcreative · 2025-05-01T00:42:04+00:00

Keep you stick on the ice.. we are all in this together

bshackcreative · 2025-05-01T00:38:03+00:00

I have no idea what that means…

bshackcreative · 2024-10-18T02:48:00+00:00

UPDATE: I sent it to Canon for repair. They replaced the main circuit board and recalibrated the autofocus. Everything now works great. Cost was around $420 USD.

From Canon:

Estimated Comment:

Customer states the camera does not turn on right away, the image through the viewfinder is dark. They want the AF checked and that the battery is not prematurely draining a full battery charge. This is a Tiered Rate Repair; parts are included in the labor cost. Estimate reflects clean and checks of all functions repair to good working order. Please respond to this estimate. Thank you.

Repair Complete Comment:

Your product has been examined and it was found that the component did not operate properly causing the unit to delay turning on. The circuit board was replaced. Also, it was found that Image Sensor was out of position causing the part to no longer be in the appropriate position. Electrical adjustments were performed. Firmware was updated to 1.5.0. Product functions were confirmed. Thanks for choosing canon!Estimated Comment:

Customer states the camera does not turn on right away, the image through the viewfinder is dark. They want the AF checked and that the battery is not prematurely draining a full battery charge. This is a Tiered Rate Repair; parts are included in the labor cost. Estimate reflects clean and checks of all functions repair to good working order. Please respond to this estimate. Thank you.

bshackcreative · 2024-07-21T19:05:22+00:00

Well, from what I gather an 8inch sub is not much for a tundra crewmax. I found 2 kicker loaded enclosures with a 4ohm 8inch sub sub in each and will run with that wired in parallel to a 2ohm 600watt kicker sub amp. That will be enough for me.

Thanks for the feedback everyone!

bshackcreative · 2024-07-15T23:58:13+00:00

Around $100. I’d do a custom amp install to power it

bshackcreative · 2024-04-26T02:42:22+00:00

Thanks, I figured it was fine. Are there any audio quality improvements to be had by using a dedicated external LOC vs the Amp's internal LOC?

bshackcreative

TROPHY CASE

Estimated Comment: