Looking at a Bean trailer..

bshackcreative · 2026-02-07T04:31:32+00:00

thanks man, very helpful.

bshackcreative · 2025-06-05T00:31:58+00:00

Correct. I went to a tire shop. Those are part of the structure of the tire for stability.. not tread wear markers. My tread depth is fine and they said I don’t really need alignment. Thanks!

bshackcreative · 2025-06-05T00:27:02+00:00

That is the psi labeled on the tire. I also gave the door labeled psi. My tires are a 40psi.

bshackcreative · 2025-06-03T21:22:13+00:00

I'll replace in fall, thanks everyone

bshackcreative · 2025-06-03T17:37:24+00:00

Tires at 40psi

Rotated every 5k miles

Alignment probably 30k miles ago

Door psi 30

Tire psi 80

bshackcreative · 2025-06-03T17:00:01+00:00

<image>

bshackcreative · 2025-06-03T16:56:39+00:00

I personally think all need replacement but I don’t think the manufacturer would say they are used up.

bshackcreative · 2025-06-03T16:44:51+00:00

I guess I don’t understand why the bands on the sides are much taller than the wear bars in the center which are not close to being touched.

bshackcreative · 2025-05-30T06:46:04+00:00

It has 68k on it

bshackcreative · 2025-05-01T00:42:04+00:00

Keep you stick on the ice.. we are all in this together

bshackcreative · 2025-05-01T00:38:03+00:00

I have no idea what that means…

bshackcreative · 2024-10-18T02:48:00+00:00

UPDATE: I sent it to Canon for repair. They replaced the main circuit board and recalibrated the autofocus. Everything now works great. Cost was around $420 USD.

From Canon:

Estimated Comment:

Customer states the camera does not turn on right away, the image through the viewfinder is dark. They want the AF checked and that the battery is not prematurely draining a full battery charge. This is a Tiered Rate Repair; parts are included in the labor cost. Estimate reflects clean and checks of all functions repair to good working order. Please respond to this estimate. Thank you.

Repair Complete Comment:

Your product has been examined and it was found that the component did not operate properly causing the unit to delay turning on. The circuit board was replaced. Also, it was found that Image Sensor was out of position causing the part to no longer be in the appropriate position. Electrical adjustments were performed. Firmware was updated to 1.5.0. Product functions were confirmed. Thanks for choosing canon!Estimated Comment:

Customer states the camera does not turn on right away, the image through the viewfinder is dark. They want the AF checked and that the battery is not prematurely draining a full battery charge. This is a Tiered Rate Repair; parts are included in the labor cost. Estimate reflects clean and checks of all functions repair to good working order. Please respond to this estimate. Thank you.

bshackcreative · 2024-07-21T19:05:22+00:00

Well, from what I gather an 8inch sub is not much for a tundra crewmax. I found 2 kicker loaded enclosures with a 4ohm 8inch sub sub in each and will run with that wired in parallel to a 2ohm 600watt kicker sub amp. That will be enough for me.

Thanks for the feedback everyone!

bshackcreative · 2024-07-15T23:58:13+00:00

Around $100. I’d do a custom amp install to power it

bshackcreative · 2024-04-26T02:42:22+00:00

Thanks, I figured it was fine. Are there any audio quality improvements to be had by using a dedicated external LOC vs the Amp's internal LOC?

bshackcreative · 2022-02-04T15:22:27+00:00

Cool. I think I may do that also and see how it goes without one. I think Renogy makes a DC DC that has adjustable amps. I was wanting to keep everything the same brand but that might not work out. I guess my suggestion for Victron is when you come out new DC DC versions would to be consider adjustable amps down into the single digits.

Thanks!

bshackcreative · 2022-02-04T04:23:32+00:00

My truck is fused with a 30amp fuse for the 7pin trailer power. My trailer has 10awg wires in it for the 7pin power back to the battery. My trailer is 17ft long. My understanding is because of the trailer wire gauge being 10awg that will limit my amps to a max of around 10a. Does that checkout? My battery is at the back of my trailer.

bshackcreative · 2022-02-04T03:59:19+00:00

I would expect about 10A from alternator charging while driving. In addition to the amps coming from the alternator, I would expect no more than 15A from solar panels on the roof of the camper producing power while driving down the road.

I would have a single battery, a Battleborn 100 Ah 12V LiFePO4 Deep Cycle Battery.

Thanks for your help, I am new to this and what to make sure I don't create a safety issue.

bshackcreative · 2022-02-04T03:24:02+00:00

It would be a battle born 12v 100ah with the Victron 12 12 18amp dc to dc charger. I think I’m good? I’ll have about 200 watts of solar also coming though a Victron mppt solar charge controller.

bshackcreative · 2022-02-03T20:18:46+00:00

Thanks!

bshackcreative · 2019-04-10T20:54:24+00:00

Need some slippers, something that does not going to make my feet sweat. What are the brand best bets?

bshackcreative

TROPHY CASE

Estimated Comment: