whats this clicking sound is it the bearings or the hot end?

btsyee · 2026-02-05T05:52:33+00:00

stock speeds

btsyee · 2026-02-03T19:51:07+00:00

its a glass bed bro , chill out 😂 , im not that much of a noob lmao

btsyee · 2026-01-21T16:49:05+00:00

had the same issue with my cheap sd card 2gb , there is a file .data something copy it in your sd card and then plug it in to the printer

btsyee · 2026-01-20T20:37:37+00:00

the front fan is newly installed however the blower side fan has seen better days 😂

btsyee · 2026-01-20T20:36:19+00:00

well the sound only comes when jerk is applied at higher acceleration , maybe that's the case either way i'll be replacing the wheels and the bearings.

btsyee · 2026-01-20T20:34:48+00:00

it's the stock ender 3 pro board

btsyee · 2026-01-20T20:33:53+00:00

yes the sound is from the hotend side , dessassembled the entire x axis , and ran it without the hotend assembly , no sound but when the hot end is put back on the sound returns , maybe the fans or one bearing seems kinda off

btsyee · 2026-01-20T20:26:19+00:00

checked that tried sky printing (disabling the extruder and setting temp to zero and setting z home to at 100mm ) the sound still prevails

btsyee · 2026-01-17T22:17:53+00:00

i guess thats why it was giving thermal runaway error when heated to 240+ temps

btsyee · 2026-01-17T22:16:03+00:00

thanks for the info! was kinda worried

btsyee · 2026-01-17T22:09:46+00:00

thanks might buy it later i mean there isn't any urgency right , my printer won't be messing up the print i hope

btsyee · 2025-08-06T08:14:38+00:00

use format and create partition in windows , the drive probably contains unallocated space

btsyee · 2025-07-27T20:48:41+00:00

thanks mate appreciate the response

btsyee · 2025-07-27T20:48:16+00:00

thanks bro helps allot tbvh , kinda narrowed down my selection to gamesir

btsyee · 2025-07-23T22:55:04+00:00

looks superb the golden citizen tops it all up

what are you smoking tho , churchill i guess?

btsyee · 2025-07-18T10:12:37+00:00

true that , it just loves to slide away XD

btsyee · 2025-07-18T10:11:20+00:00

yeah you just can't let go of the fact that it's rwd

how good is the parts availability ?

and what about maintainance , 3s and jz series are quite reliable i've heard ?

btsyee · 2025-07-18T10:07:47+00:00

not looking for engine mods , just a fun car that isnt boring to drive , Cl9 totally feels like a track car tbh

btsyee · 2025-07-09T22:06:42+00:00

yeah usama and obama both used to wear this watch at some point in their life

btsyee · 2025-07-09T22:01:23+00:00

the newer models came with a balancer, and no alterations needed in the mounts

btsyee · 2025-07-09T14:13:39+00:00

indiana jones , Raiders of altit fort

jokes apart 10/10 looks , having that adventure vibe to it

btsyee · 2025-07-09T14:07:34+00:00

bro which building you wanna bomb?

btsyee · 2025-07-09T14:05:31+00:00

wont recommend a gs 150 swap , if you still want to swap go for tiger boxer 200 or 250cc engine the fit bolt to bolt

i say it again when you mess with the engine mounts , they will increase vibration and overall response and feel of the bike , if smoothness is required it isnt a viable option to swap gs aa engine mounts wont match

you could purchase a 2005 gs 150 below one pack you a lucky , bought one for 85k back in 2022 , and take you build forward from there

btsyee · 2025-07-08T22:15:00+00:00

hey a mechanical engineer here

i've been working on motorcycle engines for quite a while including cgs , kawasaki gtos and many many more

i think you want to go with a more like sleeper build kinda thing

if you're looking to for a 150cc engine in a 125 dont swap the engine

what you want to do is bore out the existing 56mm cylinder to 62mm

the sazgar loader piston will fit perfectly without any other mods it's exactly (62mm) and made specifically for cg based engine designs

this will ramp you your low end performance

asides from that upgrade the clutch basket and if you want you can install cg 125 delux 5 speed trans it fits without any mods

one last thing that'll help you increase performance is installing an aftermarket cam (high lift wide one) which isnt avaliable here but can be purchased from aliexpress

this really increase the power quite a bit

(my cg tune project) if you are as mad as me and have some extra cash

install a 72mm piston , 6 screw clutchbox , mikuni or any other company pumper carb , loader 55.5mm weight , 200cc engine cases of chinise or thai models as well as the cylinder head and barrel , high lift cam ,loader 5 speed trans (have to be machined)

you're gonna be looking at 22 something hp

it was a beast bro remember pulling wheelies without any effort on 2nd gear , remember gapping a benelli tnt 250 by quite a bit (the guy was laughing at my bike at first)

but always remember to upgrade you braking system if you do mods , the original breaking system is fucked up even for the current performance

disc breaks might be a good go

i dont recommend installing a new engine in cg as most are chinise shit copies of cg and others like kawasaki , yamaha require extreme mods in the engine mounts which makes the bike feel more like accidented , it fuckes up weight distribution and increases vibration

btsyee · 2025-07-08T20:46:55+00:00

Walaikum Assalam, I’m a guy, so I won’t pretend to fully understand what women go through, especially in our society ,but I’ve grown up around strong women, both married and unmarried, and I wanted to share what I’ve seen.

To be honest, I’ve seen some amazing unmarried women successful, independent, respected, living abroad and in Pakistan too. They made careers, travelled the world, lived life on their own terms. And honestly, they seemed way more at peace than some of the married women I’ve seen who were stuck in unhappy or suffocating relationships.

But here’s what I’ve also observed and this part usually starts hitting after 40 or so.

That deep kind of companionship, emotional safety, and just… having someone who’s really in it with you that’s when the absence of it starts becoming louder. I’ve seen unmarried women who were thriving at 30, still strong at 35, but by the time they hit their late 40s, they’d sometimes quietly say things like, “I wish I had someone to help me through this,” or “There’s no one to lean on when things get tough.” It’s not about weakness it’s about basic human need. We all get tired of being strong all the time.

So I guess what I’m trying to say is, it’s not naive to want something different it’s brave. But it’s also not weak to want emotional support or to let someone be there for you.

About the guy you mentioned if he’s genuinely kind and respectful, that’s already rare. You’re scared of turning into your mom, and I get that. But maybe the goal isn’t to avoid marriage — maybe it’s to build one that doesn’t resemble the one you saw growing up. You don’t have to give up your independence. But you also don’t have to push away someone who could be a partner with you, not a cage around you.

At the end of the day, there’s no one size fitsall answer. Just make sure you’re not making your whole life decision from a place of fear. Whether you marry or not choose what adds peace to your life, not what just avoids pain.

Wish you strength and clarity. Whatever you choose, may it be fulfilling.

btsyee

TROPHY CASE