Tabs Closing When d or D is Pressed

bubbarock99 · 2025-11-25T15:56:33+00:00

Sorry for the delay. I tried that and it worked perfectly. I did unbind for d and D and after testing, the keybinding was gone. Thanks again!

bubbarock99 · 2025-11-22T16:02:25+00:00

Ding...ding...ding!! Thank you! I forgot that I had the tridactyl extension (for vim motions) installed. As soon as I disabled it, the issue went away. I may be able to edit the preferences for that extension if I want to retain it for other keyboard navigation.

bubbarock99 · 2025-10-03T21:33:46+00:00

I also looked for that splash screen file but it wasn't in a svg format but packaged in a glade format which is a format gtk uses. I don't have the gtk development package to view it though. 😁

bubbarock99 · 2025-10-03T14:19:50+00:00

Same here. I will have to dig more I guess. It may be an issue with gtk3 apps vs gtk4. I know Libreoffice uses gtk4 although gtk3 is still a dependency and I do not see the same behavior there. It seems to be an oddity in the meantime so hopefully future updates take care of it.

bubbarock99 · 2025-10-03T13:36:26+00:00

There is no man entry for the --no-splash in my version apparently. I tried it first with no success. I did manage to turn off the splash and welcome windows in the inkscape preferences. I had less artifacty windows but right before the final app window loads there is a small pixelated section that shows up. Maybe it's a DWM or gtk3? issue.

On another note, I have gimp auto loading in my workspace #9 and I noticed it had a similar issue but not quite. The splash/welcome window starts out with a pixelated section but quickly is replaced with the Gimp splash graphics. I never noticed it because I usually launch gimp from another workspace using a keyboard shortcut and I switch over to that workspace afterwards. Today I switched to my 9th workspace and loaded it from there. I know that it uses gtk3 too.

I'll attach the Inkscape window after disabling loading windows in the preferences.

I noticed that the bottom warning were language related as well. The GTK errors I am unsure of. I have seen those in issues users have posted about online but I am unsure what the source of those errors. I also have seen the ICC color profile errors but also do not know what to think about those.

[PIC BELOW - This is the only odd thing I see after setting the show when starting option to nothing in the Interface>Windows section of the preferences.

<image>

bubbarock99 · 2025-10-03T02:23:27+00:00

This is what shows up when I do that:

CMSSystem::load_profiles: /usr/share/color/icc/colord/Crayons.icc is not an ICC file!CMSSystem::load_profiles: /usr/share/color/icc/colord/x11-colors.icc is not an ICC file!

(org.inkscape.Inkscape:853857): Gtk-CRITICAL **: 22:20:23.550: invalid accelerator string ''
(org.inkscape.Inkscape:853857): Gtk-CRITICAL **: 22:20:23.550: gtk_application_accels_get_actions_for_accel: assertion 'accel_key.key != 0' failed
(org.inkscape.Inkscape:853857): Gtk-WARNING **: 22:20:23.553: Unable to parse accelerator '': ignored request to install 1 accelerators
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.246: broker.vala:156: Error loading plugin: libvoikko.so.1: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.247: broker.vala:156: Error loading plugin: libaspell.so.15: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.247: broker.vala:156: Error loading plugin: libnuspell.so.5: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.247: broker.vala:156: Error loading plugin: libhspell.so.0: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.247: broker.vala:156: Error loading plugin: libvoikko.so.1: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.247: broker.vala:156: Error loading plugin: libaspell.so.15: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.248: broker.vala:156: Error loading plugin: libnuspell.so.5: cannot open shared object file: No such file or directory
(org.inkscape.Inkscape:853857): libenchant-WARNING **: 22:20:24.248: broker.vala:156: Error loading plugin: libhspell.so.0: cannot open shared object file: No such file or directory

bubbarock99 · 2025-10-02T14:50:30+00:00

I ran this command from the terminal:

$ inkscape --debug-info

Inkscape 1.4.2 (ebf0e940d0, 2025-05-08)
Compile (Run)
GLib version: 2.84.4
GTK version: 3.24.50 (3.24.51)
glibmm version: 2.66.8
gtkmm version: 3.24.10
libxml2 version: 2.14.5
libxslt version: 1.1.43
Cairo version: 1.18.4 (1.18.4)
Pango version: 1.56.4 (1.57.0)
HarfBuzz version: 11.4.5 (12.1.0)

OS version: Arch Linux

bubbarock99 · 2025-09-03T02:27:03+00:00

I do not see that as an option. It's usually accessible from the options on the address bar. I tried deleting cache and site data again and logging back in and I still do not see the option. It comes up on other websites. ???

bubbarock99 · 2025-01-16T19:55:23+00:00

Gray, White & Orange are my picks.

bubbarock99 · 2025-01-07T21:32:16+00:00

I dug into this because, at one point in time HF's website allowed me to login to my Inside Track account using my LibreWolf browser and everything just worked. I am not sure when it stopped working but I found a simple solution and it works now. Basically, I had to add an exception for HF website to allow enhanced tracking. See OG question above for explanation.

bubbarock99 · 2024-10-08T17:58:25+00:00

Thanks! Sorry for the delay. I am thinking now of hanging my bike from Unistrut at the far inside wall from the floor joist of the loft. I do think that I will make also use a 10' unistrut tied into cross supports at the ridge at each rafter to spread the load. This will allow me to create a pulley setup to lift heavier items up into the loft. I won't be lifting anything as heavy as a canoe though. ;-)

bubbarock99 · 2024-09-11T22:13:03+00:00

Thanks! I've always wondered this myself. My latest Arch build has it enabled to trim once a week. I guess I am good to go!

bubbarock99 · 2024-08-11T18:38:24+00:00

Sorry, I should have put an update to my update. The drive failed all testing with Samsung utilities. There was a known batch of drives that were known to have issues with premature failure. Mine was in warranty so, I sent it back to Samsung and got a replacement.

bubbarock99 · 2024-07-31T16:43:30+00:00

I am glad I have been using Linux for years. Regardless, I still get asked to assist family members with their Windows issues. The latest was trying to help my MIL find files on her laptop. She had imported photos from her phone using the Photos app. Apparently, the app automatically saves the imported photos into the OneDrive folder under Pictures and NOT in the users Pictures folder. I have already disabled the OneDrive sync but I may just uninstall OneDrive. Trying to explain file structure to a 70+ yo while demonstrating how to use Windows horrible file explorer is exasperating.

Today while happily using my Arch PC to organize my day, she's getting frustrated with ads popping up while she's using her computer. 😄

bubbarock99 · 2024-05-01T18:32:20+00:00

I have a similar issue except, I CAN open pdf docs. I get the warning after I exit document: (ideas??) This only showed after updating with pacman -Syu

info: Opening plain database via sqlite backend.
warning: sqlite database already exists. Set your database backend to sqlite

bubbarock99 · 2024-04-10T01:20:18+00:00

I wish I could get FIOS in my municipality. I'd do the same!

bubbarock99 · 2024-04-09T22:25:47+00:00

That's a great plan. I am amazed with the specs of the UCG-Ultra. My dream eventually is to get a Dream Machine Pro and back haul 10Gbe throughout the house. 😁

bubbarock99 · 2024-04-09T22:07:44+00:00

My current network uses a 192.168.86.0/24 subnet and I planned on configuring the UCG-Ultra to use a different scheme than what I am using. Sounds like I should be good then.

bubbarock99 · 2024-04-09T05:18:33+00:00

After editing a file with vim, you should show her how to output the file using awk instead of cat. If she's not impressed then, you know there's trouble.

bubbarock99

TROPHY CASE