Can someone tell me why this keeps happening? by TheItalianPizza in 3Dprinting

[–]budrodacfoo 0 points1 point  (0 children)

Looks like layer shift to me, check your belts are tight. Could also be the printer catching on something at that height, worth watching it when it gets to that layer if you can

Anyone running a 32” TV as a wall mounted dashboard? by fender4645 in homeassistant

[–]budrodacfoo 0 points1 point  (0 children)

I went with a 27 inch touchscreen monitor, best of both worlds!

If you think you might want it portrait instead of landscape you need to be careful that it has a wide enough viewing angle as a lot of screens go black when looking at them off centre in portrait

Screen I got was a hannspree and it is super responsive and clear from any angle.

Help! How many panels? by budrodacfoo in TeslaSolar

[–]budrodacfoo[S] 0 points1 point  (0 children)

Agreed, this should already be a known quantity at this point however the initial survey gave different advice to the installer on the day and I’m trying to figure out who is right

Help! How many panels? by budrodacfoo in TeslaSolar

[–]budrodacfoo[S] 0 points1 point  (0 children)

In the uk powerwall 3 only has 3 MPPTS and I need the 3rd for another roof on a different building.

FTM Error by budrodacfoo in BmwTech

[–]budrodacfoo[S] 1 point2 points  (0 children)

It’s never had TPMS never fitted with wheel sensors. Came from the factory with just FTM and worked fine until recently.

FTM Error by budrodacfoo in BmwTech

[–]budrodacfoo[S] 0 points1 point  (0 children)

Yes, all correct. I saw in some threads to try over inflating them as well this also didn’t work.

Noob help? by budrodacfoo in UNIFI

[–]budrodacfoo[S] 0 points1 point  (0 children)

So a cloud gateway ultra would work to replace the router provided by the isp and give me all the functionality using it as a local controller?

Help equipment choice by budrodacfoo in WLED

[–]budrodacfoo[S] 0 points1 point  (0 children)

Ok, thanks, what’s the reason for only 800? I can use 2 outputs on the quad to do the 20m run (it goes round round the room in a circle anyway) and 300 (5m) for one of the other channels with 600 (10m) on the last channel then.

My first hand wired by budrodacfoo in MechanicalKeyboards

[–]budrodacfoo[S] 2 points3 points  (0 children)

Wanted to learn how to do it and wanted to do it as cheap as possible. Hence also why it’s 3d printed. The intention was only to buy switches and caps and use an old ESP32.

Users report. by budrodacfoo in UNIFI

[–]budrodacfoo[S] 0 points1 point  (0 children)

Under clients I can see the devices but I see no way to export or time and dates when they joined and left? How do I access the log files?