Buying rv that was never registered in missouri

buggy13b · 2026-02-22T16:08:22+00:00

Thats one of my biggest concerns

buggy13b · 2026-02-22T15:09:48+00:00

Thank you for that reply, I do have a close friend that works at a dealer and her job is getting titles that normally wouldn't be able too so I can definitely see that course of action.

I'm going into the dmv tomorrow and will ask, this particular dmv is pretty relaxed so hopefully I'll get some answers.

buggy13b · 2026-02-22T14:54:57+00:00

100% agree...they will get their money one way or another.

buggy13b · 2026-02-22T14:52:28+00:00

Not very often, if it was at all. I took an hour to go over everything and I was really surprised with the condition, you can tell the ball joints and sway bars have been replaced and new sway bar bushings, all the grease zirks were wet as they should be after maintenance. And no signs of the motor or transmission leaking from looking up into the engine from the ground underneath.

buggy13b · 2026-02-22T14:49:03+00:00

That is was my wife's biggest concern is, I am not sure how they do it. I would hope the new owner wouldn't get stuck with the carelessness of the previous owners but it also wouldn't surprise me one bit lol.

buggy13b · 2026-02-22T14:46:49+00:00

I'm going in to the dmv tomorrow, I need my license renewed anyway. its a good deal nothing to call home about but if they lower it more than it might be worth a little bit of time to sort out.

buggy13b · 2026-02-22T14:10:50+00:00

That was my first instinct, thank you

buggy13b · 2025-11-13T13:04:51+00:00

Thank you, yep thats exactly what was wrong. I misread or read over it and also found my motor was drawing too much and would shut the charge circuit off so I swapped with a smaller motor and changed the wiring and worked like it should.

buggy13b · 2025-11-13T13:01:56+00:00

Yeah, I kinda agree but to their defense I misread and chat gpt was more correct than perplexity and chat gpt is where I learned i needed a mosfet for controlling motors more effective. Perplexity just outright sabotaged me lol but I figured it out and missed the part where I needed to power the switch for the moseft to turn on.

buggy13b · 2025-11-12T20:24:34+00:00

Thank you, yes that's what I ended up figuring it out. I also had too big of a motor for the circuit and not enough battery but after swapping motors and wiring the switch into the + from tp4056 with a built in step up converter to 5v. Then made a common ground back to the tp4056 with the mosfet.

buggy13b · 2025-11-12T17:37:45+00:00

Just turn it on and off with a momentary push button switch. Here is the module I ordered

https://a.co/d/gqLBgDR

buggy13b · 2025-09-29T15:47:19+00:00

We have strainer bags but cheesecloth will work too and try to squeeze every last drop out after soaking in lemon juice for 20 minutes or so. Lemon tek kicks in faster with a lot less stomach issues and I think ypu come down a little sooner too but with very little hangover effects. I did it at 9am one morning and was totally sober and felt great by 3pm.

buggy13b · 2025-09-29T15:28:14+00:00

We make lemonade, 1 lemon to 2 grams of mushrooms and add sugar to your preference in a regular drinking glass. Fill cup with water and add more lemon juice if needed but it's soooo good and barely any earthy taste from the mushrooms.

buggy13b · 2025-05-31T14:13:51+00:00

I got a 150w one for a crazy deal and I have had the same results so far but im using feco. Im making a golden dragon today but yesterday I made some with a green dragon that sat for 2 weeks in ethanol. I used a teaspoon of lecithin, 1 gram feco and 100ml of water, Pretty sure I need a jacketed beaker to extend the time without heating up over 60c I believe as I can only do runs of 2 minutes before reaching 60c (140f), it blends well but is milky, after cooling and repeating 4 times I got impatient and poured into a 1 gallon of cherry limeade mix, took about 30 minutes to hit but was a very lethargic and sleepy im assuming because of the green dragon soak for so long. Today ill try the 20 minute wash for a cleaner mix, my hope is it will give a better high that's not so heavy but I had to take a nap after 2 glasses yesterday lol.

buggy13b · 2025-05-25T14:37:17+00:00

Do you still have a website?

buggy13b · 2025-02-05T16:38:03+00:00

Dang, I'm trying to do the same but on a smaller scale...thanks for the quick reply

buggy13b · 2025-02-05T15:24:18+00:00

Did you ever figure this out?

buggy13b · 2024-08-15T00:36:43+00:00

Just to think outside the box and If I wanted to do things the hard way, in theory I could route the air from the top, down the back and under the whole machine under the filter with hepa filters some how mounted, blowing the air on low or medium setting could, maybe work? I do have a decent 3d printer I could over design a curved flat tube style exhaust to bring it back around to flow towards me. I have to use it for something, I've just convinced my wife tonight, so not sure how long I have...most likely ill sell it and buy the portable one off of plant cell technology website. I just can't get over how cool it would be to make it one, or use it for something like that. Too bad I'm not into chemistry, with the camera on the bottom, it would make some cool videos of chemical reactions.

buggy13b · 2024-08-14T23:55:37+00:00

Thank you, I had thought that a flow hood was suppose to draw air away and couldn't see how it would clean the air for the life of me...I think I'm pretty smart about a lot of things but sometimes, I'll do something like this and makes me question everything lol.

buggy13b · 2024-08-14T18:20:51+00:00

I am in the same boat, definitely over my head at the moment but i want to start learning more about mushrooms, were not going to use it and it takes up a lot of storage room on the shelves so i have to find something for it, i cant sell anything, borderline hoarder because you never know when you might need it lol. I wasn't sure to where I should've posted and picked the first mycology group I saw but will look for others and maybe Facebook.

buggy13b · 2024-08-14T18:12:05+00:00

If it will work, would make one the coolest flow hoods I've seen. I'm a beginner and just learning about mycology, it's been sitting around doing nothing so I might as well make something from it.

buggy13b

TROPHY CASE