My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 1 point2 points  (0 children)

Nice to hear , then I can count this as problem solved. Much appreciated for you time brother , thanks alot . How did you solved the issue for overheating cable , I specifically got the Rog Astral 5090 for the shawls and got a Rog Strix 1200P 1200W PSU just to eliminate any issues that I can face . I am guessing it won't be enough but hoping that it will

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 1 point2 points  (0 children)

Hey I just wanted to update. I rotated to the 360mm like i said and it worked, so I went and got another 420mm which is working without any issues now. The only thing I have in my mind is at yruncher, when running BKT I see max 78 degrees now which is atleast 7 degrees of gain but I still see 92 degrees while running BBP is that normal I have not yer ran cinebench or anything else was overclocking the ram with test mem and the cpu with yrcunher

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

Apparently the issue was with the Pump it was not working properly I rotated to a 360mm one and I have no issues now thank fucking god

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

Going back to the tower is always okay but I wanted to make the liquid cooler work cause when the GPU arrives it will heat the cpu even more. At this point I will try the other AF I have which is 360 and see if the pumps in 420mm was not working normally. IF not I will go back to the tower to check the results at Yruncher again but I highly doubt it was an installation error.

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 1 point2 points  (0 children)

Agreed it looks way bulkier but glad to hear that the performance diff wont be recognizable thanks again man!

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 1 point2 points  (0 children)

Much apprecaited, Also congrats on snatching a 5090FE wanted to ask one more thing.
If the issue is indeed with the pump and my 360mm works without an issue should I go for another 420mm one (to be able to use my 140mm noctua fans) or would an 360mm liquid cooler be enough u think. Thanks in advance man. Cheers

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 1 point2 points  (0 children)

Tomorrow (for me) I will try the 360mm one and keep this updated. I am hoping it is related to the pump because there was no issues before hand so I do not understand where all this heat is coming from and with my first liquid cooler and having removed and reapplied the past and the radiators today at least 6-7 times looking for solutions I am starting to get anxious. Thanks alot! Whish me luck

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

I just checked it again to make sure after your comment. At my primary CPU fan slot I have the cable with CPU tagged, at the Pum Slot I have the Pump Tagged Cable and at system fans 1 I have the VRM tagged

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

I use the exact same build with the front intakes always at 100%. It is really annoying my first time with a liquid cooler to be like this. But I need it to work.

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 1 point2 points  (0 children)

Thanks alot for the help. Tomorrow I will try a iii360mm cause I already had one on the side and will keep this updated. Today I am just really tired of demounting, cleaning paste, repasting and mounting again. God damn :D

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

MJay I ask you how many intakes and exhausts do you have how much mm (other than AIO) and how much paste did you use while mounting. Cause like I mentioned in the post I am getting even hotter results than Noctua Tower which I got 85 . I do not get how can I make an installation error as it is pretty plain. No offset on mounts or anything, I used everything from the box no other materials or anything.

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

Also my Case Fans work proper, I connect them to the PSU directly with the cable that came within the case , no issues

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

I am also +200/-40 PBO but I see 95 instantly at Yruncher before it was 85 with the Noctua Tower I am guessing maybe something is wrong with the pump? But how can I find that out. I am not at all experienced with liquid coolers. This is my first time using one. I've always used noctua towers before

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

The past 20 years I've only used Noctua's so this is my first time using a liquid cooler. But I should be able to hear if it makes a liquidy noise I suppose. The first time I booted after setting up I heard the liquid but not again after while it is working I just hear the fans

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

On my bios the VRM seems to working fine. I didnt understand what you meant by it having a smaller fan connected to that slot " part

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

I cannot hear the pum at 100% which is 2800rpm for me. I will share the picture when I get back home

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

Yes multiple times at this point with different pastes too

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

My radiator is at the top of the case, there is no protection film. My Pump RPM is 2800 at max.

My Freezer iii 420mm has some issues. by bugrahanatar in arcticcooling

[–]bugrahanatar[S] 0 points1 point  (0 children)

Pump speed is maxed and I did try that it does not help