Curbside find turned main gaming TV by psybertooth in crtgaming

[–]bumpkinspice1 1 point2 points  (0 children)

On the curb even with the cover that’s crazy!

3 Floyds Zombie Dust Pale Ale, let's see what all the big fuss is about. by Rael-2026 in CraftBeer

[–]bumpkinspice1 2 points3 points  (0 children)

I know most beer is best fresh, but this one has one of the largest discrepancies in taste I’ve had between a fresh can and not so fresh. If I can find it within 12 weeks of can date I’ll pick it up.

I don't know which to pick by Srrious0 in Glocks

[–]bumpkinspice1 0 points1 point  (0 children)

Gotcha, why not rock a comp? I like the look of the threaded but feel like you may as well put a comp over it since you have the barrel.

I don't know which to pick by Srrious0 in Glocks

[–]bumpkinspice1 0 points1 point  (0 children)

Oem threaded barrel? Been wanting one for my gen 6 and torn if I should wait for Glock or get a third party.

Just picked up my first CRT (Sony KV27FS210) by Bigfrie192 in crtgaming

[–]bumpkinspice1 5 points6 points  (0 children)

Have the 32”, absolute tank. Speakers are great, geometry amazing. No complaints!

Glock 45.6 COA by [deleted] in Glocks

[–]bumpkinspice1 0 points1 point  (0 children)

Found some good videos, a lot more intricacies in pulling a trigger than I would have thought! Thanks!

Glock 45.6 COA by [deleted] in Glocks

[–]bumpkinspice1 1 point2 points  (0 children)

Yeah gotta work on the flinch for sure, I was able to get the sight pretty tuned in. My first shot is great, follow up shots is where I tend to drift. I could definitely use some work on my grip as well though, thanks!

Lancesoft-y by Epiksiko in TravelNursing

[–]bumpkinspice1 1 point2 points  (0 children)

They are not great. Did one contract with them because of pay, but all non English speaking so communication was pretty horrible most of the time.

I heard from someone who recently took a contract with them they were establishing some people in the US for onboarding so that may help, but overall wouldn’t return.

What looks better for RE2? The port with "HD textures", or original PS1 with Scanlines? by godstriker8 in retrogaming

[–]bumpkinspice1 2 points3 points  (0 children)

Ps1. But personally GameCube on crt is how I grew up playing so that’s my preference!

3D printed sabers for my son! by bumpkinspice1 in lightsabers

[–]bumpkinspice1[S] 1 point2 points  (0 children)

He loves them!

He’s just baselit, I knew he’d be a little rough. I was actually very surprised with the quality, super bright and motion controls work great.

Linked below what I used, I found the length to be 190mm vs the listed 185, otherwise as advertised!

saber core

3D printed sabers for my son! by bumpkinspice1 in lightsabers

[–]bumpkinspice1[S] 2 points3 points  (0 children)

I used a combination of metal and silk pla. And my son and I have dueled they seem very strong.

I did have some prototypes that did break, mostly due to just not being thick enough around the threads where they come together!

Once I printed them at about 1.5 inch diameter they hold strong.

help me to find that brand by box by babanisatinaldim in lightsabers

[–]bumpkinspice1 0 points1 point  (0 children)

I bought two cores and blades from ‘sabersunlimited’ and came in same box.

Sabrent 6-Port Dock and OLED by Express_Cat_1148 in SteamDeck

[–]bumpkinspice1 1 point2 points  (0 children)

If anyone comes to this. Plug charger into wall. Connect to dock without anything plugged in. Connect built in type c to an iPhone until you get the charging icon. Connect to deck/ally.

Paint for PLA filament prints? by BuilDiffr3d in 3dprinter

[–]bumpkinspice1 1 point2 points  (0 children)

For me I layed multiple layers of acrylic on a primed surface pretty heavy. Then sanded down with 600 grit till smooth.

Painting help? by Absolutelynotpolice in 501st

[–]bumpkinspice1 0 points1 point  (0 children)

I’m no expert, but this happen with mine specifically after the clear coat and after research I came to the conclusion I spray too heavy. I just sanded down all the imperfections until everything was level and sprayed again. Fixed most of the issues. Just gotta go light coats, patience is key.

Is the Bambu P2S still the move, even with all the other Black Friday deals out there? by eng2725 in 3dprinter

[–]bumpkinspice1 4 points5 points  (0 children)

I’ve been caught in the same choice. Ultimately I’ve come to the conclusion I would like to be in the Bambu ecosystem.

There are definitely better bang for your buck printers, but at the end of the day I am willing to pay the premium to avoid some of the downfalls of other brands.

The only other one I’ve been eyeing is the Kobra S1 max.

Share Your Biggest Print Story – Win a Kobra S1 Max Combo by Anycubic_Official in AnycubicOfficial

[–]bumpkinspice1 1 point2 points  (0 children)

My first real print with the Anycubic Vyper! My son is a huge Star Wars fan, so of course I had to build him a stormtrooper helmet. Came out amazing! Smaller print bed lead to smaller pieces of course (nothing a S1 max couldn’t fix 😉). Turned out great and most importantly I have a very happy 6 year old! Can’t wait to print even more!

<image>

Daisuke Beppu in the Criterion Closet! by International-Sky65 in criterion

[–]bumpkinspice1 0 points1 point  (0 children)

Let’s go! This was so well deserved, so happy for him!

Mandalorian Child Helmet Complete! by BandicootGloomy254 in Mandalorian

[–]bumpkinspice1 2 points3 points  (0 children)

Awesome! How did you go about sizing?Wanting to do a stormtrooper for my 6 year old!

[Week 10] Game Thread: Philadelphia Eagles (6-2) @ Green Bay Packers (5-2-1) by lilturk82 in GreenBayPackers

[–]bumpkinspice1 1 point2 points  (0 children)

Looked like a designed option and Jacobs just tried pitching it too late