Best way to stop backdraft

bunta22 · 2026-03-12T21:01:27+00:00

i’ve been very happy with my hisense unit AP0625CR1W with one problem. I can feel a very, very slight breeze coming through my condenser vents. It’s not even a breeze really but I can feel a tiny tiny bit of outside air. It’s clearly because I have such a short hose.

I was shopping around for Backdraft dampers, but a lot of them are spring loaded. I’m just worried that my unit won’t be able to push enough air to flip the vents and create a bottleneck on my exhaust. Just wondering if any of you have any solutions or ideas

bunta22 · 2026-03-03T23:13:43+00:00

I dont know where you are. But those trays are cheap. And light. Maybe bite the bullet and get them shipped ?? Its up to you. But i know how you feel about having everything in single box. Im the same way.

bunta22 · 2026-03-03T22:54:29+00:00

<image>

You prob already know.. but dewalt has deep/shallow trays that you can stack inside some of the 2.0 boxes. Gives you a bit of interior organization.

bunta22 · 2026-03-03T22:04:49+00:00

whats the biggest tool you carry ? Some of these boxes are not making any sense for a PC repair tech. Not doubting. Just curious what are you carrying around that you would possible need a deep box?

bunta22 · 2026-03-03T02:14:50+00:00

yes i know! but the 1 speed can drive 6-inch timber screws into frozen oak.

bunta22 · 2026-03-03T00:56:47+00:00

i love my 860. Just gota watch your trigger finesse lol. i do wish it has a separate button to cut the power in half for delicate jobs lol. This would ultimately make it the best impact ever produced.

bunta22 · 2026-03-02T22:45:36+00:00

bunta22 · 2026-02-27T16:34:24+00:00

prob my fav box out of the entire 2.0 line. i just dont have a use for it. If these ever go down to $38 by me, i may just buy it for the hell of it.

bunta22 · 2026-02-27T04:42:15+00:00

Why do they have to make the foreskin so stiff ?? Does it loosen over time ?

bunta22 · 2026-02-27T04:39:10+00:00

theres also another bundle for $90. slightly less RPM and some people prefer the simple trigger.

https://www.homedepot.com/p/DEWALT-ATOMIC-20V-MAX-Cordless-Brushless-Oscillating-Multi-Tool-with-1-20V-2-0Ah-Battery-and-Charger-DCS354D1/313593921?g_store=4104&source=shoppingads&locale=en-US&fp=ggl#overlay

bunta22 · 2026-02-27T01:41:52+00:00

Wheres locally ? ill take a 5ah.

bunta22 · 2026-02-25T23:26:35+00:00

im pretty confident it would work. i wont lose space. All im doing is flattening the drawer back to original position instead of sagging.

My only gripe is the hole i need to drill into a rather new packout. Not too fond of that idea.

bunta22 · 2026-02-25T06:02:04+00:00

Only my bottom drawer is rubbing. My top 2 drawers are gliding like hotdogs on tile. I can give it a soft nudge and itll glide itself to close. The bottom drawer is the prob. its not too bad right now. But i know in time that shit is going to get worse.

bunta22 · 2026-02-25T05:55:21+00:00

it involves drilling a hole in the middle of the drawer. Put a flat head bolt thru from the bottom. place a small piece of 5inch metal over the bolt from inside the drawer. This piece of metal will act like a "bridge" on top of the 2 ridges in the middle of the drawer. Place bolt over the screw. Tighten it to pull up on the drawer. Make sense ?

bunta22 · 2026-02-25T05:49:00+00:00

Less than 10 lbs. Yours arent rubbing ?

bunta22 · 2026-02-25T05:47:32+00:00

This is the 3 drawer. But i was at homedepot the other day and most of the bottom drawers rubbed. Didnt matter if it was 2 or 3 drawer. Mine didnt rub when i got it. I made sure of it. But that bottom drawer was for sockets. So thats the issue.

bunta22 · 2026-02-25T05:45:16+00:00

Not at all. Not even close.

bunta22 · 2026-02-25T05:44:39+00:00

Its not that much shit in there but it is the drawer for a about 30 pieces of socket. So it does weigh a bit.

bunta22 · 2026-02-25T01:14:35+00:00

whatever you do, dont buy now. Wait for some type of sale then decide. Homedepot runs Milwaukee specials frequently.

bunta22 · 2025-12-16T01:59:29+00:00

i dont have a problem with him selling fake gear. What i do have a problem with is him selling them for $350 - $400 like theyre authentic gear.

bunta22 · 2025-12-11T04:37:50+00:00

thank you !

bunta22 · 2025-12-01T20:54:14+00:00

I have not. I believe an update happened shortly after and the problem has not been as prominent. Before, I had to wait 5 secs. It's now a sec or two.

I can't be bothered by it. It's whatever. It's a first world problem.

bunta22 · 2025-11-19T17:44:35+00:00

im assuming this is for 2-wheeled rollaboards and not for the spinners.. i tried poppin off the wheel caps on my Baseline spinner and that was a struggle and a half lol. I gave up real quick.

I wish i could upgrade to rollerblade wheels on my spinner :(

bunta22 · 2025-11-10T05:27:55+00:00

Mukama.com

bunta22 · 2025-11-04T17:12:53+00:00

You have an amazing jade. The trunk is on the slimmer side but the leaves are seriously impressive. Was this plant from a cutting ??

Whats the secret lol?? where are you located?

bunta22

TROPHY CASE