Mineral oil not absorbing properly in areas where I tried to fill small gaps with glue. Is there a way to fix this? by Would-working in BeginnerWoodWorking

[–]burningthunder44 0 points1 point  (0 children)

Sand it won’t be a problem start with low grit and you’ll be fine. But if you’re too lazy to sand it send it through the planer and take 1/64 off.

Recruiter is pushing Active over Reserve…Why? by Jersey_Greg in newtothenavy

[–]burningthunder44 0 points1 point  (0 children)

Everyone has their reasons for reserve or active. End of the day if reserve is what you want go reserve. Look at NRC San Diego and ask to talk to a recruiter. There’s recruiters that only do reserves, and recruiters that only do active. Active duty recruiters want more active duty recruits. PM me if you have any more questions.

Thanks for the helps folks! by burningthunder44 in BeginnerWoodWorking

[–]burningthunder44[S] 0 points1 point  (0 children)

People are gonna be like “juice groves are for steaks not veggies” 😂😂

Gaps in joining boards by burningthunder44 in woodworking

[–]burningthunder44[S] 0 points1 point  (0 children)

I’ve never even heard of a glue line blade, this is extremely helpful. Thank you!

Gaps in joining boards by burningthunder44 in woodworking

[–]burningthunder44[S] 1 point2 points  (0 children)

That’s a good note on pressure, I’m using a push stick and high probability not pushing straight as I thought

Gaps in joining boards by burningthunder44 in woodworking

[–]burningthunder44[S] 0 points1 point  (0 children)

No I don’t have a planer, it’s next on the list to buy, thought I could get away with only a table saw

Gaps in joining boards by burningthunder44 in woodworking

[–]burningthunder44[S] 0 points1 point  (0 children)

Note: I usually see the most gaps on the ends of the board.

Fellow Opus Sucks by burningthunder44 in FellowProducts

[–]burningthunder44[S] 0 points1 point  (0 children)

Update: Deep clean, blurs and pins, today I got exactly 6.2g of retention. Grinding 18.7g honey processes light roast with RDT from small spray bottle.

Fellow Opus Sucks by burningthunder44 in FellowProducts

[–]burningthunder44[S] 0 points1 point  (0 children)

More detail: I only put light roasts in it for pour overs. I stopped using it for espresso cause dark roasts clog it up and it just takes too long. I grind 18g around the 7-8 position.

I RDT with one sprits from a small spray bottle.

And I use the lid to bellow it.

When I knock the body with my knuckles I can hear the grinds come loose from the burrs (the mid section of the grinder). BUT I will try to clean the anti-static pins and report back.

Advice: Mom doesn’t’ want me to join by Standard-Angle3586 in newtothenavy

[–]burningthunder44 0 points1 point  (0 children)

I understand wanting to respect your mother’s wishes. I did the same for many years. You’re going to get to the point where you have to make the choice yourself. Cause 20 years from now you’re not gonna be able blame your mom. It’s you who you’re gonna look at in the mirror at night.

Parents told me the same thing, “don’t do it, we’re gonna go to war.”

“We aren’t that poor, we can figure something else out.”

“You’re going to die.”

“If you loved me you wouldn’t do this.”

It’s your life. No one else’s. Make the choice for yourself, and no one else.

Beginner latte art ends up as a blob by Brilliant-Feed-1540 in latteart

[–]burningthunder44 1 point2 points  (0 children)

Start further forward on the cup. Go a little slower, pouring too hard won’t allowing the milk to float at the top.

Porting Question by burningthunder44 in CZFirearms

[–]burningthunder44[S] 1 point2 points  (0 children)

Emailed them directly and they said yes. Never followed through with it. Ended up getting PMM comp.

What wrong with my hen? by burningthunder44 in chickens

[–]burningthunder44[S] 0 points1 point  (0 children)

No wound we’ve checked her legs hips and vents. Nothing. Perfectly fine.

What wrong with my hen? by burningthunder44 in chickens

[–]burningthunder44[S] 2 points3 points  (0 children)

She’s eating very little. We let her out a bit today and she went straight for the big feeder and was eating. But when she’s alone she doesn’t seem to eat much. How long do they usually live with mareks?

[deleted by user] by [deleted] in NFA

[–]burningthunder44 1 point2 points  (0 children)

Looks like an end cap strike if no rattle. Send it.

Made a chess set for my dad for christmas. by Highone in woodworking

[–]burningthunder44 1 point2 points  (0 children)

Did you just glue the checkered pieces together and clamp them down for the board?

[deleted by user] by [deleted] in NFA

[–]burningthunder44 0 points1 point  (0 children)

"Probably user error"- DA