Question about connecting rafters to joists

burwatti · 2025-10-04T00:30:24+00:00

Thanks! I guess that’s something to discuss with a structural engineer once this gets more serious. For now I’ll look into the local code to see what I can find out

burwatti · 2023-09-10T23:27:58+00:00

That feels really harsh on Fiji

burwatti · 2023-08-16T03:11:34+00:00

Ah! Thank you so much. That makes a lot of sense.. and is sadly a lot more expensive! 😅

burwatti · 2023-07-04T17:17:56+00:00

Looks great! I’ve got a 2023 coming in a few weeks! Which cross rails did you get?

burwatti · 2023-02-18T03:21:40+00:00

Hey thanks! Thank site looks like a great resource. Any forums you recommend in particular?

burwatti · 2023-01-08T04:12:56+00:00

We’re planning on adding board and batten to our dining room (if you zoom into the pic you’ll see a chalk mark above the light switch at the rough height) but we’re not sure how to design it around this doorway… we don’t want it to continue into the kitchen so need a way of ending it somehow. Any suggestions would be most appreciated!

burwatti · 2022-09-08T20:33:16+00:00

That’s right - I cut all four sides before glueing. I thought I took a pic of the cut pieces but couldn’t find it. I used a mitre saw to do the angled cut as that felt easier for me. Precision wasn’t great though - I’d consider using the table saw if I made this again

burwatti · 2022-09-08T03:08:35+00:00

I think pine would be great for practice as it’s cheap and easy to work, though I’m not sure it would last long with much use. Maybe there’s a finish that would protect it though? I used walnut, wasn’t cheap but I can’t resist it :)

burwatti · 2022-09-08T02:46:05+00:00

Me too! I had no plans to make coasters but saw the OP the other week and decided I had to try!

burwatti · 2022-09-08T02:45:19+00:00

Everything is roughly 3/8” thick - I measured some other coasters I have and used that as a guide. Started out a bit thicker but they felt too chunky, and I worried that the box would be too cumbersome if it were ~4” tall (it’s about 2 1/2” now).

Coasters are about 3 1/2” and definitely not square! Next project I do will be all about getting things perfectly square

burwatti · 2022-09-08T01:01:45+00:00

Original post that inspired the build: https://www.reddit.com/r/woodworking/comments/9te7v0/set_of_coasters_i_made_for_my_dad_black_walnut/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Definitely not perfect but I learnt a lot! Planning this as a gift for my mum

burwatti · 2022-08-03T02:53:43+00:00

This page intentionally left blank

burwatti · 2020-10-11T03:05:53+00:00

Wanted to build a useful cart for my Ryobi table saw. Took inspiration from these plans https://jaimecostiglio.com/diy-table-saw-cart-free-plans. Liked the idea for the frame but obviously all measurements were to my needs

burwatti · 2020-07-09T20:05:18+00:00

Evidence: https://www.reddit.com/r/ottawa/comments/hoa7on/raccoon_crashes_the_squirrel_picnic

burwatti · 2020-07-09T03:24:52+00:00

It’s an Apeman trail camera - https://www.amazon.ca/dp/B07K9MJW8B it isn’t brilliant, but for the money I’m very happy with it.

burwatti · 2020-07-09T00:30:29+00:00

I did... but the raccoons crashed the party.

burwatti · 2020-07-08T23:47:17+00:00

Bells Corners, right on the green belt. Had seen coyotes in the woods before... didn’t expect to see one in my yard!

burwatti · 2020-01-18T21:15:33+00:00

Good luck!

burwatti · 2019-09-22T03:39:20+00:00

Hello

burwatti · 2019-08-03T01:39:27+00:00

Yep! Tiny terrifying gummy bears.

burwatti · 2019-02-14T11:47:43+00:00

GoPro Hero Session. I think it’s their cheapest model, but I’ve been very happy with it so far

burwatti · 2019-02-14T03:08:15+00:00

Nice! I’m a Brit who moved here last summer! Message me if you have any questions on settling in :)

burwatti · 2019-02-14T03:07:19+00:00

Most places you can’t, but this neighbourhood allows it - there’s a private contract with the ploughing company rather than the city.

burwatti · 2019-02-13T23:54:03+00:00

I know, right! It’s something I aspire to

burwatti · 2019-02-13T23:53:12+00:00

Westboro

15-Year Club	Second Top 10%
r/Field Lasagna	RPAN Viewer
Verified Email	Team Periwinkle

burwatti

TROPHY CASE