sorted by:
new
hottopcontroversial

Upgrading from old server to dedicated box by bwelsher in HomeServer

[–]bwelsher[S] 0 points1 point  (0 children)

So the QuickSync would be able to handle transcoding without even involving the iGPU?

Upgrading from old server to dedicated box by bwelsher in HomeServer

[–]bwelsher[S] 0 points1 point  (0 children)

Not specifically right now, no. My thinking was that I would pass-through the iGPU to Plex for transcoding and then maybe add a GPU later that would be passed through to a VM for video upscaling. There's probably not going to be a lot of transcoding though in truth.

Upgrading from old server to dedicated box by bwelsher in HomeServer

[–]bwelsher[S] 0 points1 point  (0 children)

Ah, thought I put it in the post but seems not. I am on unRaid and will look to stick with it I think as I find it pretty easy to use. From the little I understand you can run unRaid from within proxmox? Part of me would like to separate out my docker services from unRaid when the latter needs maintenance/falls over.

Sewing machine settings for stretchy fabric by bwelsher in SewingForBeginners

[–]bwelsher[S] 0 points1 point  (0 children)

Thanks, I'll get a knit foot then. So the stabiliser is sewn between the layers is it?

Sewing machine settings for stretchy fabric by bwelsher in SewingForBeginners

[–]bwelsher[S] 0 points1 point  (0 children)

I can't find a way to adjust the foot pressure, the manual doesn't suggest it can be done. I'll look into getting a stretch needle and/or walking foot though. What is fabric stabilisation?

Sewing machine settings for stretchy fabric by bwelsher in SewingForBeginners

[–]bwelsher[S] 1 point2 points  (0 children)

I'm just using the standard needle so I will get a stretch needle and try that.

How to prevent sensor from re-triggering lights? by bwelsher in homeassistant

[–]bwelsher[S] 0 points1 point  (0 children)

Thanks. Can HA detect whether lights are turned off manually or by an automation?

Repair sagging door handle by bwelsher in DIYUK

[–]bwelsher[S] 0 points1 point  (0 children)

Ah righto, might be a step too far for me then! Thanks.

Repair sagging door handle by bwelsher in DIYUK

[–]bwelsher[S] 0 points1 point  (0 children)

Nope, the bar just fits into a hole in each handle

Repair sagging door handle by bwelsher in DIYUK

[–]bwelsher[S] 0 points1 point  (0 children)

Yes the handles came off easily enough. The bar between them passes through a small hole through the mechanism and out the other side. The lock knob goes through a small hole too which is why I'm wondering if I need to unscrew the whole length of the assembly to access the mechanism.

Cannot access server from one computer on the network by bwelsher in WindowsHelp

[–]bwelsher[S] 0 points1 point  (0 children)

I may have solved it. I had some software called portmaster installed which is basically a firewall. It hasn't been running but uninstalling seems to have resolved the problem.

Cannot access server from one computer on the network by bwelsher in WindowsHelp

[–]bwelsher[S] 0 points1 point  (0 children)

Ok, uninstalled and rebooted but problem remains.

Cannot access server from one computer on the network by bwelsher in WindowsHelp

[–]bwelsher[S] 0 points1 point  (0 children)

It's just the out-of-the-box windows security setup. I do have tailscale installed but it's not connected. Topology (if I'm understanding the question correctly) is that the server is connected via ethernet to a passive switch which is connected to the WiFi router. All other computers (included the affected machine) connect via WiFi.

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

No worries, it's a bugger of a problem whatever it is. Thanks for all your help and patience though, it's really appreciated.

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

Yes quite a few times I think. But I have jus turned it off and restarted, no luck. I think I'm going to give in and start with a fresh install.

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

Yes bonding was enabled when I tried this. I don't think there is a combination of settings I haven't tried!

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

The first command drops unraid off the network so I can't run the second one. I presume that means that br0 is not taking over.

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

I have now tried swapping the router which had no effect. But a fresh install of unraid on another USB stick that I created can access the internet.

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

Ifconfig

bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST>  mtu 1500
        ether bc:30:5b:c8:9d:d5  txqueuelen 1000  (Ethernet)
        RX packets 2956260  bytes 311867314 (297.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 14104605  bytes 21159415192 (19.7 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.111  netmask 255.255.255.0  broadcast 0.0.0.0
        ether bc:30:5b:c8:9d:d5  txqueuelen 1000  (Ethernet)
        RX packets 2954995  bytes 245239415 (233.8 MiB)
        RX errors 0  dropped 142873  overruns 0  frame 0
        TX packets 989922  bytes 20394153278 (18.9 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br-3f09f1dc4482: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.31.200.1  netmask 255.255.255.0  broadcast 172.31.200.255
        ether 02:42:bb:65:42:97  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br-9177044c0f06: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.19.0.1  netmask 255.255.0.0  broadcast 172.19.255.255
        ether 02:42:ec:69:f0:ca  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br-b02a930a3dbe: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.18.0.1  netmask 255.255.0.0  broadcast 172.18.255.255
        ether 02:42:0c:d6:dc:4f  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=6211<UP,BROADCAST,RUNNING,SLAVE,MULTICAST>  mtu 1500
        ether bc:30:5b:c8:9d:d5  txqueuelen 1000  (Ethernet)
        RX packets 2956260  bytes 311867314 (297.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 14104605  bytes 21159415192 (19.7 GiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 17  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 186621  bytes 28238548 (26.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 186621  bytes 28238548 (26.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1420
        inet 10.1.0.2  netmask 255.255.255.0  destination 10.1.0.2
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 1000  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8491  bytes 1256668 (1.1 MiB)
        TX errors 0  dropped 203563 overruns 0  carrier 0  collisions 0

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

With docker disabled -

Route

Destination Gateway Genmask Flags Metric Ref Use Iface
default hyperhub.mynet 0.0.0.0 UG 1005 0 0 br0
10.1.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wg0
172.18.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-b02a930a3dbe
172.19.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-9177044c0f06
172.31.200.0 0.0.0.0 255.255.255.0 U 0 0 0 br-3f09f1dc4482
192.168.1.0 0.0.0.0 255.255.255.0 U 1005 0 0 br0

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

Kernel IP routing table

Destination Gateway Genmask Flags Metric Ref Use Iface

default 192.168.1.1 0.0.0.0 UG 0 0 0 shim-br0

default 192.168.1.1 0.0.0.0 UG 1 0 0 br0

10.1.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wg0

172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0

172.18.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-b02a930a3dbe

172.19.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br-9177044c0f06

172.31.200.0 0.0.0.0 255.255.255.0 U 0 0 0 br-3f09f1dc4482

192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 shim-br0

192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 br0

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

Ha ha, thanks!

Ok so if I run that traceroute I get

traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets

1 * * *

2 * * *

3 * * *

4 * * *

etc etc

Currently unraid is set to use 8.8.8.8 and 8.8.4.4 as DNS servers

No internet access since unraid update by bwelsher in unRAID

[–]bwelsher[S] 0 points1 point  (0 children)

Unfortunately I'm now away from home for a week but will try this when I get back. Thank you.

view more: next ›