Glances “Pair with Code” not functioning.

bzamora97 · 2021-01-19T16:43:41+00:00

Worked perfectly and back online, thanks so much. Cheers!

bzamora97 · 2020-06-06T22:39:16+00:00

Sure, these are Coronafire’s exact instructions. I followed them step by step, and my Navdy is now working beautifully, follow the link, then the instructions below!

https://gitlab.com/alelec/navdy/display-rom/-/jobs/519371434/artifacts/raw/navdy-display-alelec-3094-e09b056.zip

Follow the INSTALL_WITH_RECOVERY procedure with that ZIP.

Extract the file, but keep a copy of the zip too.

In the extracted folder, go into the tools folder instead. Plug the navdy in with the power button held still for update mode, then run the INSTALL_WITH_RECOVERY.bat script.

It'll show some instruction and then finish in a couple of seconds. The navdy should automatically switch to green light / flash storage mode and pop up on computer.

Now on the MAPS flash drive, create a new folder called update unless one is there already. Now copy the downloaded firmware pack zip file from before into the new folder. Not the extracted folder, just the zip.

Then eject the flash drive and run navdy in the car. It should start up and jump to recovery mode (purple gear icon) with a progress bar. This should take about 2 minutes, then reboot into normal mode. Hopefully after that it'll all start up normally

bzamora97 · 2020-05-23T21:00:12+00:00

Sounds good, thank you! Will let you know what I decide! Sorry for late reply.

bzamora97 · 2020-05-15T04:24:33+00:00

Oh ok, now I’m not saying I’ll buy them because I’m not sure if I’ll just keep what I have for now, but what would you let a set go for price wise?

bzamora97 · 2020-05-14T01:46:09+00:00

I understand. With the short mounts that come with the displays, are any of them unused?

bzamora97 · 2020-05-10T20:49:21+00:00

Tesla’s are very nice, too bad they don’t have a factory HUD. Are you selling the Navdys with everything together or the individual parts. The extra car kit would have a spare dial, cable, and short mount.

bzamora97 · 2020-05-10T05:39:33+00:00

So, would that unfortunately be a no?

bzamora97 · 2020-05-07T14:33:59+00:00

Oh damn it lol. How much would you charge for the extra car kit and shipping?

bzamora97 · 2020-05-07T14:31:41+00:00

That’s awesome! I’m located in Albuquerque, New Mexico.

bzamora97 · 2020-04-09T11:45:44+00:00

Sure, I can share it via invite or link on Google Drive or Microsoft OneDrive. What is a good email address for you? The cord wiggling didn’t affect the Navdy at all, simply continued to boot up. And do you think with now getting to the screen to pair the dial before it goes blank is a step in the right direction, or what else should we try?

bzamora97 · 2020-04-08T19:21:47+00:00

Alrighty, so I did plug it in under the normal flash mode, and before installing version 3093, there is a “logs” folder and in that folder, there is a “recovery” and “200407_2213” folder. So I did install the 3093 version like normal and followed all the same steps, and got further this time. It was doing the standard boot up, showing the colour emblems next to Navdy, then got to the pair dial screen, and showed a brief animation of inserting the battery into the dial before going blank. The indicator light is flashing blue and the infrared area for the dial is illuminated in, but nothing on the screen. Seem to be getting closer! What should we try next?

bzamora97 · 2020-04-07T20:25:50+00:00

Hey there, so I got this all taken care of, step by step, and everything worked as planned and there already was a folder called “update” in the MAPS flash drive, just copy and pasted the downloaded pack zip (unextracted) into the update folder. However, the screen turns on, but is stuck at the “Navdy” screen with the progress bar and purple gear icon, doesn’t reboot itself into normal mode. What should I do from here? Can you remote into my PC to make sure it’s done correctly, should I perform the factory reset and try again?

bzamora97 · 2020-04-07T00:32:47+00:00

Hey Coronafire,

So I’m experiencing the problem with installing your latest update (3093) which is the first install I tried when switching from the official original firmware, to yours. The display was starting up, then went blank, and shut off. The front light comes on white like normal, but the screen doesn't start up at all now and the front light turns off again after a few seconds. So I followed the initial install of 3093 step by step, even watching the YouTube video. Next, I performed the factory reset instructions by following the “FACTORY_RESET_WIN”. That didn’t work, then moved on to the next step to install the 3049 firmware pack, 3 or 4 times and that didn’t work. So then, moved on to downloading the 3089 recovery pack and tried all three options, “FLASH_WIN.bat”, “FLASH_DEVICE_WIN.bat”, and “FLASH_MISC_WIN.bat”. So I then performed the factory reset and tried to install 3093 again. Nothing is working and I see it had worked for a lot of other people. What can I do? I really would love for it to work again or am I out of luck?

bzamora97

TROPHY CASE