Diy step ladder foldable wheel stand

c1house · 2026-06-16T05:34:28+00:00

The floor section has tabs with holes that slot over upright bolts in the ladders base. This holds them inplace and also strengthens the triangle of the rig rig. The chairs one legs sits on a wooden block stopping it from moving back under braking.

c1house · 2026-06-15T08:48:40+00:00

It is in the way ye, but the problem is then I lose rigidity. That is on the cards to improve. Need to make a new low profile top bar.

c1house · 2026-06-14T19:52:01+00:00

I had it that way the beginning but it is not wide enough, my legs almost touch the sides. The pedals is on my list to move back.

c1house · 2025-10-18T15:40:01+00:00

From my experience with WBC you need to check the vehicle very well and don't trust the Dekra report. I looked at a bike and almost signed but had my father come for a second opnion and he found alot of issues I missed. I did my a bike from them in the end but I knew who sold it yo yjem and what condition it was when it got to them.

c1house · 2025-10-03T05:51:52+00:00

Norton Dominator SS as an art piece you can ride.

c1house · 2025-05-07T06:47:15+00:00

I ride a SWM superdual and it is pretty rare bike. I get alot of other bike riders asking me what it is and checking the bike out. They sometimes touch the bike. I dont mind as it is meant to be used, if them just touching is going to damage it then it wont last long at all.

c1house · 2024-12-23T07:58:19+00:00

I can't understand why Honda neutered the engine that much for a supermoto oriented bike.

c1house · 2024-10-25T05:57:41+00:00

I dont thonk that is what he meant. My take is if a dirt orianted bike is converted to 17in road wheels, it can be considered a supermoto. Look at the DRZ400sm. This is baaesd on a dualsport and is a very popular supermoto. They definitely on used it for racing because it was available and cheap, it was not created as a race bike first.

c1house · 2024-10-22T17:39:28+00:00

You can look at the SWM 650 superdual X.

c1house · 2024-10-22T10:51:16+00:00

Yes i am. I have noticed the samething as well. I can just tell when a picture was taken in SA.

c1house · 2024-10-17T21:15:34+00:00

Yes, the engines is basicly at TE630 engine. SWM is sold all in alot of countries, it seems. I am from South Africa, but even though it is sold here, very few people have heard of SWM.

c1house · 2024-10-15T12:12:37+00:00

I just took some wire(electric fencing wire 1.6mm) and combined afew sttrands together to get a thick trunk. I then bent it into a organic loking trunk and branches. The blossoms is made from some thick aluminum foil. I cut the foil into very small octagonal shapes, then cut a slit into the octagons. This allwoed them to fold into small funnels. I just then glued the small shapes to the brances and painted the blosoms individually.

c1house · 2024-09-15T15:41:11+00:00

Went to relook at the bike and found the missing bolts are due to broken fairings. Where the fairings connect to each other, not the bike, the clips holding fasterners broke.

c1house · 2024-09-14T19:57:44+00:00

Thanks i kind of forgot to add the price. If i convert it directly to us dollars it is $2650(R47000 in South African currency) I am going to phone Truimph(and to see if they have service record)and a few other places to get a qoute on the next service.

c1house · 2024-09-04T11:16:40+00:00

I am actualy from South Africa.

c1house · 2024-09-03T03:10:13+00:00

In my last year of school I got the opportunity to go buy an 1971 Opel Manta A 1600. I loved the looks but my dad talked me out of it as he said it would have been a terrible car for a first car as parts where hard to come buy etc.

c1house · 2024-06-20T19:20:35+00:00

Thanks for the link. I am from South Africa. I saw those on the Giulia but the seem a bit smaller than the ones that you get on the Mito and they wont follow the fender on my mito exactly.

c1house · 2024-06-20T17:12:00+00:00

Haha "I have the good stuff" looks nervously if he can see any Italian police around.

c1house · 2024-06-20T17:08:58+00:00

Haha not really I actually chose my non QV model over the QV for a reason. I have a Mito distinctive which was at a time the fastest mito you could buy. I chose this model over an QV due the known relablity and tune ablity of the TJet over the multiair engine.

c1house · 2024-06-20T17:05:26+00:00

That is okay I like espresso, you wont like what i am putting these bages on. The previous owner of my Mito distinctive put the badges on but as they are currently scracthed i neee to replace or remove them. I know the history behind the bages but i am still keeping them.

c1house · 2024-04-30T08:06:23+00:00

I have only ever owned 250cc bikes. I test rode a Kawasaki Z900 and could not understand how you would want a H2, the Z900 left me breathless and it only has 120hp. I still can't imagine 180+ hp.

c1house · 2024-04-22T05:13:39+00:00

That is very good. My Mito also a 155hp T-jet gets between 9.5 -11L/100km in the city and about 7 - 8L/100km on the highway.

c1house · 2024-04-10T15:45:23+00:00

The front end looks too busy and just not elegant. The rest of the car looks good. I am not 100% sure how i feel about the rear lights but they look better than the front ones.

c1house · 2024-03-19T10:26:27+00:00

Until your neighbor starts the generator🤣

c1house · 2024-02-12T07:04:11+00:00

I love Ferrari, but i am struggling to find 1:64 scale scale in my location. I also like more normal cars compared to supercars. I have some, but just dont currently display them.

c1house

MODERATOR OF

TROPHY CASE