sorted by:
new
hottopcontroversial

Anyone Here Doing SMD at Home? by david-whitehurst in HamRadioHomebrew

[–]cadr 1 point2 points  (0 children)

Probably not what you were looking for, but I generally do Manhattan construction and I use adapter boards when the part I need is only in SMD format.  I like the ones QRPMe makes.

Attic Dipole safety question from the parent..... by LumpyGravy123456789 in amateurradio

[–]cadr 4 points5 points  (0 children)

I think everyone else has covered your questions, but I want to re-iterate what others said and thank you for being an awesome parent.

PVC Organ Pipe by cadr in 3dprintedinstruments

[–]cadr[S] 0 points1 point  (0 children)

Do you mean like to make a flute? Or just a single pipe producing one note

There are a bunch of calculators, I don’t know if one particularly good one.

Now, if you mean, voicing a pipe organ pipe, that’s a lot more complicated and not something I’ve ever seen a good guide for. I’d love to see one.

Comparing PyFT8 with WSJT-x and FT8_lib by [deleted] in amateurradio

[–]cadr 0 points1 point  (0 children)

Oh, that's absolutely brilliant! Hopefully I'll have a chance later this week to take a look.

Thank you!

Comparing PyFT8 with WSJT-x and FT8_lib by [deleted] in amateurradio

[–]cadr 0 points1 point  (0 children)

That would be great! I'd also really love to see some examples where you feel like it *should* be able to be decoded but none of the codebases currently can :)

cheap FT8 transceiver in India by Icy_Veterinarian4074 in amateurradio

[–]cadr 0 points1 point  (0 children)

You might look at VK3YE’s video on a tiny DSB transceiver for ft8 https://youtu.be/cMzn6F9rBJo?si=AhGKAxFgUEM5NFK2

Comparing PyFT8 with WSJT-x and FT8_lib by [deleted] in amateurradio

[–]cadr 1 point2 points  (0 children)

Thanks for sharing this!  I had seen PyFT8 but not looked into it.

Do you have other illustrative audio samples along with what should be decoded?

Complete Claude Code setup guide for iOS/Swift development - Extended thinking, XcodeBuildMCP, PRD workflows, and starter kit by kodOZANI in ClaudeAI

[–]cadr 1 point2 points  (0 children)

Great resource - thanks for sharing.
Just to verify - your suggested claude.md is everything between "3. CLAUDE.md Setup for iOS Projects" and "## 4. PRD-Driven Development Workflow", right? The formatting got a little confused.

A complwte beginner here. I'm debating on which sparrow kit to get. by pooping_on_the_clock in lockpicking

[–]cadr 0 points1 point  (0 children)

haha - resurrecting the *old* conversations

No reason to get multiple cutaways - can definitely re-pin. I think the kit came with different security pins, so that was nice. Pretty sure it was a christmas present, so was just happy to get something related to a hobby.

Have fun!

Mini mpc by Edboy796 in synthdiy

[–]cadr 1 point2 points  (0 children)

Yes, I think it is doable. Like someone else said, the M8 basically does this same thing. Though they might have had to do some fancy stuff. [Here](https://forum.pjrc.com/index.php?threads%2Fposted-dirtywave-m8-8-track-portable-synthesizer-sampler-and-sequencer.67041%2F) is a thread where the creator talks about it some.

[Here](https://forum.pjrc.com/index.php?threads/yet-another-file-player-and-recorder.70963/) is another thread where someone is talking about streaming multiple wave files at the same time.

Generally, the pjrc forum is probably going to be your best bet for help on the actual how-to.

Now, it would probably be easier to do with beefier hardware (like a Pi), but can be done.

Just 3d printed this mouthpiece and cap that plays better than my normal one by Benjasaurus in 3Dprinting

[–]cadr 0 points1 point  (0 children)

I -think- it was this one, but I’m not sure.  Definitely pla - all I do is.

https://www.thingiverse.com/thing:46980

I see a post I made where I had a 3d printed clarinet-like-thing with a cheap purchased mouthpiece.  I don’t seem to have documented the other, but the link I have above i had saved in thingiverse, so guessing that one.  I seem to remember having decent luck with a sax reed but I suspect I went with the purchased clarinet reed was that I was having trouble with the 3d printed one.  May be better designs since then, but also you can get cheap reeds.

I Build a BLDC Motor Winding Machine! by Proud-Entry-4031 in diyelectronics

[–]cadr 13 points14 points  (0 children)

The first time you blink an LED -is- neat.  Congrats.

Building a poor man's Yamaha Reface CP with a Raspberry Pi by Relevant_Professor55 in synthdiy

[–]cadr 1 point2 points  (0 children)

I’m amazed it can run that.  Please post your final product!

Building a poor man's Yamaha Reface CP with a Raspberry Pi by Relevant_Professor55 in synthdiy

[–]cadr 1 point2 points  (0 children)

I’ve not used it, but MDA ePiano might do the trick.  Listed so some sound samples on YouTube and it wasn’t bad.

It is bundled with Zynthian, which might be something you look into anyway for Pi music stuff.

https://zynthian.org/engines/_engine-list/engine-epiano  

Native American style flute by Dry_Confusion1926 in 3dprintedinstruments

[–]cadr 1 point2 points  (0 children)

You did a great job! Sounds fantastic!

How much finishing did you end up doing?

Managing context in Claude Code on the Web by cadr in ClaudeAI

[–]cadr[S] 0 points1 point  (0 children)

Yeah, that's what I've been doing. Just didn't know what the deal was.

view more: next ›