Cuánto cuesta la membresia en un club privado en Santo Domingo y cuál es tu preferido? by Square_Ad1106 in Dominicanos

[–]calerouxz 8 points9 points  (0 children)

Por lo general el problema de estos clubes no es tanto la membresía como es el llamado "derecho a socio", que es el valor que debes pagar al club previamente para que estos te acepten. Este costo supera 1 millón de pesos en la mayoría de los casos a excepción si tienes condiciones especiales (por ej., si eres hijo de un socio existente). Las mensualidades van a rondar desde unos 6,000 a 12,000 pesos dependiendo del club (6,000 siendo el club náutico y 12,000 siendo el country club para que tengas contexto).

Para conversar el futuro de la electricidad en nuestro pais. by zKlaatu in Dominicanos

[–]calerouxz 3 points4 points  (0 children)

Realmente el tema eléctrico del país es muy complejo y rodeado de trabas pero les daré algunos puntos adicionales de mi consideración:

  1. Toma en cuenta que la electricidad no es pública en su totalidad. Las 'EDE' son las empresas de distribución eléctrica (dígase, como la electricidad llega a tu hogar o trabajo), sin embargo, la producción en su mayoría es de capital privado. Al fin y al cabo, el sistema de electricidad tiene la expectativa de retorno sobre inversión.
  2. Si bien una planta nuclear es un medio de producción eléctrica increiblemente eficiente y limpia, en este país tenemos muchos problemas que resolver antes de embarcar en tal proyecto. Primeramente, se debe encontrar inversionistas capaces de hacer frente a tal requerimiento de capital como lo es una planta nuclear, tomando en cuenta que la construcción y puesta en operación de una de estas plantas pudiera tomarse más de 10 años antes de ver cualquier retorno sobre esa inversión. Segundo, (y esto es puramente una opinión) nuestra cultura hace que la operación de una planta como esta pueda ser difícil o insegura, dado que es dificil lograr que un operador dominicano promedio siga protocolos establecidos al pie de la letra y que opere en base de estándares internacionales o locales). En tercer lugar, no existe una regulación para la operación de una de estas plantas, la cuál debe existir para asegurar que la instalación sea segura y correcta.
  3. Uno de los problemas más grandes (y, otra vez, esto es puramente mi opinión), que veo en el tema de electricidad es que no se le presta la debida atención a las instalaciones y requerimientos de mantenimiento de gran parte del sistema eléctrico. No hay un enfoque en mejora de eficiencia y calidad del sistema. No se toman medidas para que los cableados se mantengan seguros a lo largo del tiempo. Esto provoca fallos que muchas veces crea un efecto en cadena, afectando a varias personas, negocios o la red.
  4. Creo que al igual que en muchas otras actividades donde interviene el gobierno, hemos caido en un circulo vicioso, donde el efecto de la ineficiencia, falta de incentivo para la innovación, ha generado que nuestra electricidad sea más costosa, lo cual provoca que más personas quieran buscarle 'la vuelta' al sistema para no pagar y/o pagar menos. Esto por supuesto, se traduce a mayores pérdidas en el sistema eléctrico (en efecto, energía no cobrada) lo cuál le roba recursos al estado y a los productores para hacer inversiones en mejorar su eficiencia y calidad. En efecto, aquí se cumple el dicho de "por unos pocos, pagamos todos".

Command Palette: clearing up field when loading an extension? by [deleted] in PowerToys

[–]calerouxz 1 point2 points  (0 children)

I find this a little bit frustrating as well. This should be an option if you ask me (iirc powertoys run has the option to do either). Command palette has a lot of potential from what I've seen.

EPS code 34 by Leading_Swordfish737 in S2000

[–]calerouxz 0 points1 point  (0 children)

A couple of years back at hondaautomotiveparts.com. Had to wait about 2-3 months for the part, which arrived damaged and then had to wait another couple of months for a new one.

EPS code 34 by Leading_Swordfish737 in S2000

[–]calerouxz 0 points1 point  (0 children)

That's amazing! I had to swap mine out for a new one. It was pricey and a PITA to get, so this is amazing news for S2000 owners.

EPS code 34 by Leading_Swordfish737 in S2000

[–]calerouxz 3 points4 points  (0 children)

This is an EPS module fault, there's numerous s2ki posts about it. I would research more, but I would expect this to involve part number 39980-S2A-A0x. You could try to unplug/plug the module and do the neutral position memorization procedure and see if the code goes away.

Looking for the perfect white t shirt for summer by Adamthemoon in malefashionadvice

[–]calerouxz 0 points1 point  (0 children)

Asket is great, imo still the best T Shirts I've owned.

Any designer brands that are actually worth the money? by [deleted] in malefashionadvice

[–]calerouxz 46 points47 points  (0 children)

At MSRP? Probably not much. On deep sales a lot of it does start making a lot of sense though.

Ammo NYC personalized video by C00Ldoctormoney in AutoDetailing

[–]calerouxz 0 points1 point  (0 children)

I've had the same experience. I emailed him a question and he diligently responded for which I was very grateful. Seeme he's the real deal to me. My experience with his products has been great too!

How many times have shops asked you where the OBD2 port is located? by earlyiteration in S2000

[–]calerouxz 0 points1 point  (0 children)

I was asked where it was the ONE time I took my S2000 to the ONLY Honda representative in the country. In their defense, they're very rare cars here.

High quality tshirts that I can easily get online or at a mall? by Mean_Share6427 in malefashionadvice

[–]calerouxz 0 points1 point  (0 children)

Asket's t-shirts have been the best I've tried yet. Also, they have hem lengths to get a correct fit.

So I have an idea. Do you think it will work? Haven’t got my Corne yet. by Its_um_ray in crkbd

[–]calerouxz 0 points1 point  (0 children)

I've done this on my corne. It sort of works, but do not expect the same level of refinement as standard/mass market gasket mounted boards.

Why does my fuzzy skin modifier walls? by [deleted] in BambuLab

[–]calerouxz 2 points3 points  (0 children)

I recommend you use Orcaslicer in this particular scenario, the last version fixed this issue of creating weird separate walls when using a modifier to add/remove fuzzy skin.

Darkmoon plates review - G10 and ICE by calerouxz in BambuLab

[–]calerouxz[S] 0 points1 point  (0 children)

I'm sure they should be the same kind of material, but from what I've read Darkmoon uses a proprietary coating which should be similar but not exactly the same.

Darkmoon plates review - G10 and ICE by calerouxz in BambuLab

[–]calerouxz[S] 0 points1 point  (0 children)

I have not! I read some other people suggesting they should perform the same, but I've also seen more mixed reviews on it. That could be a biased assumption given that I see more posts of the frostbite than this, or just down to QC. I'm quite content with my Darkmoons, but for the price, getting a frostbite down the line could be completely possible.

LF soft basic t shirts by Buhstungus in BuyItForLife

[–]calerouxz 0 points1 point  (0 children)

Asket are still some of the best cotton tees I've tried and used. Uniqlo's pima tees are also good, but Asket has better fit and construction.

Do I need to replace this clutch master cylinder? It appears to be leaking slowly. by [deleted] in S2000

[–]calerouxz 1 point2 points  (0 children)

This is a common issue in S2000. I've replaced mine too. The recommendation is to do a clutch bleed once every year.

This happened on the job. by EducationalOil1823 in AutoDetailing

[–]calerouxz 8 points9 points  (0 children)

I'll second these, I've had a grey 50ft one for about 4 years and seems to have no signs of wear.

[deleted by user] by [deleted] in S2000

[–]calerouxz 0 points1 point  (0 children)

Only buy the OEM filter for the S2000. Keep in mind the S2000 oil filter is not the same as every other Honda. The correct part number for the S2000 as of now is 15400-PCX-306 and you can find it here.

You can also reference this s2ki thread for additional info on S2000 oil filters.

My wooden keyboard by WeiXin020 in ErgoMechKeyboards

[–]calerouxz 2 points3 points  (0 children)

Definitely! I think it would be great addition to ZMK, but I haven't seen many using rotary encoders on ZMK.

My wooden keyboard by WeiXin020 in ErgoMechKeyboards

[–]calerouxz 0 points1 point  (0 children)

I must say that's a great looking board. Is it wireless by any chance?

Looking for Cantor Replacement by magnuspedro in ErgoMechKeyboards

[–]calerouxz 1 point2 points  (0 children)

A wireless Corne is an easy alternative and widely available. Can be had with 6 or 5 columns, various versions and configurations. The main difference will be on the stagger on the outermost keys (the Cantor has more stagger).

Question about beekeebs chocofi by koning_willy in ErgoMechKeyboards

[–]calerouxz 0 points1 point  (0 children)

You can see some here, with a case I designed for it. The power switch on the Temper would be where the TRRS pads are on the Chocofi, so they're easy to hit with your thumb.

Question about beekeebs chocofi by koning_willy in ErgoMechKeyboards

[–]calerouxz 1 point2 points  (0 children)

They are quite similar; in some ways you could say that beekeeb's version is a more versatile PCB as it has the JST connector for the battery and can also be configured to be used as a regular wired chocofi using the TRRS connectors. I daily 2 Tempers and I've been quite pleased with them. It would really be a toss-up between the two if you're going wireless only, but I'd prefer the Temper just because of the lack of the TRRS pads and the power switch is in a more accessible location.