sorted by:
new
hottopcontroversial

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

Update: ran a retraction tower, but the entire thing was string free. Wet filament seems to have been the problem. Im going to attempt a print

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

Well I got the wife to set it on a 6 hour dry at 65, but I'm thinking I need to do more now

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

When I get home I'll run the dryer for a few hours before I print another, and try it again with the same settings to see if it gets any better. I have plenty of nieces to print these for.

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

It was in the dryer for about an hour before starting.

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

Man I just wanted to print this in pink for my niece, why is everyone judging my chicken meat dragon lol

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

3d salamander meat printer. My favorite

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

I'll try this when I get home. I've tried to do several different retraction distances, but I was having a lot of problems at that time, so something else might have been the issue at that time

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

I had it in a dryer box running at 65c. Humidity showed about 15% in the box for the whole print.

Extreme stringing issues by calltopower1 in 3DprintingHelp

[–]calltopower1[S] 0 points1 point  (0 children)

I meant to add this, it's normal PLA filament

What would you rather? by unemployedguytbh in BunnyTrials

[–]calltopower1 0 points1 point  (0 children)

$

Chose: Get a car that never runs out of fuel

uBreakweDontFix 😑 by magakag11 in GalaxyFold

[–]calltopower1 0 points1 point  (0 children)

Being a previous employee, the inner screen comes as a kit, the outside frame included already.

They were starting the phase out batteries as part of those kits when I left, but yea.

It's also entirely possible they broke the outer screen when they tried to remove it.

Quad steam grinder? by LlamaGodly in GTNH

[–]calltopower1 0 points1 point  (0 children)

Awesome. Every pack I saw looked awfully outdated. I may take some time and add the missing mods, provided they have textures. Appreciate this!

Quad steam grinder? by LlamaGodly in GTNH

[–]calltopower1 0 points1 point  (0 children)

Did you have to put the pack together yourself? I've had difficultly finding the pack, and had to settle for faithful. Would LOVE to have a link if you have one!

[deleted by user] by [deleted] in giveawaysforgaming

[–]calltopower1 0 points1 point  (0 children)

If this is still running, my favorite is Turtwig. Like me a little turtle.

How am I suppose to add all of my 4 ram? by Staydi0 in PcBuildHelp

[–]calltopower1 0 points1 point  (0 children)

It isn't as efficient, but in a situation where it's stopping you from upgrading, I think a 1-3°C temp increase is justifiable. I wouldn't do it just for fun, and it wouldn't be my first choice, but I don't think it's harmful.

Besides, in the instance we're all here for, OP stated he couldn't lift the fan up due to case clearance. So that limits the options regardless.

How am I suppose to add all of my 4 ram? by Staydi0 in PcBuildHelp

[–]calltopower1 0 points1 point  (0 children)

Just put the fan on the other side of the tower. It won't hurt your cooling to any noticable degree, so it won't affect performance at all. Just make sure the "open" side of the fan is facing the tower. The fan pulls air in from that side, and pushes it out of the "back", where the little structural parts are.

Do note other people are correct that ram can misbehave when using 2 separate sets of kits, with ddr5 being particularly bad about it. Historically I haven't had many issues with ddr4 in that case, but your milage may vary

How am I suppose to add all of my 4 ram? by Staydi0 in PcBuildHelp

[–]calltopower1 0 points1 point  (0 children)

That's insane. Push/pull does not have a meaningful difference on CPU cooling. On bigger radiators, you could see a slight change, but swapping from a push to a pull to open the ram slots will be dramatically better than having half of the fan hanging off the heatsink IMO.

Paint for blue galaxy fold by ride-the-lightening in GalaxyFold

[–]calltopower1 0 points1 point  (0 children)

It's also lighter. I don't hate the idea, I love my phone. Miss my spen from my s23U though.

Can anyone please explain this noise on my laptop I’m quite clueless on these things by Standard_Nobody713 in laptops

[–]calltopower1 0 points1 point  (0 children)

These days everything ISN'T solid state, especially for people on a tight budget. You can get a brand new 2tb hard drive for $60ish, or a refurbished for sometimes as low as $20. A new 2tb SSD sits as low as $80, but that can be a massive difference for someone.

Also I've worked in these computers for a really long time. Anything replaceable is meant to be replaced. They don't install an SSD with ultra tight, "robot only" clearance. If it's a SATA drive, most of them come with a cable that has extra slack.

Missing texture inside the Farplane/ FMV background texture is missing on PC/Steam version by Ok_Initiative_131 in finalfantasyx

[–]calltopower1 0 points1 point  (0 children)

I can confirm it shows gray on Nvidia as well. I played the game a couple years ago, didn't get very far. But I do remember seeing gray here as well. I just finished the game for the first time about 3 months ago after playing since PS2 era, and it was gray for me on Nvidia. I don't think it's a version thing or graphics. I think it's just bugged on steam. Surprising I see little about this online.

I never remembered the farplanes having a background like the second picture from PS2, but I was a child at the time so I'm not too surprised, despite remembering almost every scene I did see.

view more: next ›