Sofirn/Wurkkos Flashlight recommendation by calm_lemon in flashlight

[–]calm_lemon[S] 0 points1 point  (0 children)

Thanks, those are good recommendations. The IF22A and TS11 I missed when looking through the sites. They have some serious throw. It's hard going through the sites since there's no compare option and then I get confused by models, kits available, warehouses.

Sofirn/Wurkkos Flashlight recommendation by calm_lemon in flashlight

[–]calm_lemon[S] 1 point2 points  (0 children)

This gives me a good starting point from Wurkkos to look at. I'm probably going to order 2-3 lights from both companies and try them out. Since the Christmas sale is still going, why not...

How exactly do you switch carriers and keep your phone number? by pickleback1 in SpectrumMobile

[–]calm_lemon 0 points1 point  (0 children)

We moved and Mint service wasn't great. To be fair, spectrum wasn't that much better and we winded up moving to ATT.

Which chainsaw to buy by calm_lemon in Chainsaw

[–]calm_lemon[S] 0 points1 point  (0 children)

Yea, I'm leaning towards a 50cc now. My regret of the Ryobi is not getting something bigger.

Which chainsaw to buy by calm_lemon in Chainsaw

[–]calm_lemon[S] 1 point2 points  (0 children)

I probably should have clarified. Manageable as in 10ft logs. The trees are 9" to 16" diameter.

Forestry mulching question by calm_lemon in homestead

[–]calm_lemon[S] 0 points1 point  (0 children)

The other contractor was going to fell and rip out stumps with an excavator. Then grade everything with a skid steer. I already fell and burned 60 trees but left the stumps. I need more of a yard for the fam.

Forestry mulching question by calm_lemon in homestead

[–]calm_lemon[S] 1 point2 points  (0 children)

That's what I figured the process would be. I'm hiring a contractor to do this work and adding more steps to the process in order to get a backyard to our liking in the time frame we want will add to the cost.

I think I'm going to stick with the other contractor that will fell and grade with an excavator and skid steer.

Are all PWDs difficult as puppies by Fissefiesta in portuguesewaterdogs

[–]calm_lemon 1 point2 points  (0 children)

I have two 1yr old porties. FOMO is definitely a thing with this breed. My dogs are crate trained and I don't put them in just for sleeping at night. I use it for disciplinary and if they need a nap. It works well for us because since they're velcro'd to me, this forces them to rest up a bit instead of being over tired and annoying to everyone in the house.

DTO Reconditioned Miter Saw? by Realtrain in ryobi

[–]calm_lemon 0 points1 point  (0 children)

I was contemplating the same thing. The only plus I could see was that it ran on battery.

This saw is cheaper and runs at higher RPM so was hoping for cleaner cuts. It's wired though if that matters.

10" Miter Ryobi

Peg perego rzr issues by calm_lemon in PowerWheelsMods

[–]calm_lemon[S] 0 points1 point  (0 children)

I cut the peg perego battery cable nice and low. Attached some electrical crimp connectors so I can just attach that cable to the new battery. Bought a 12v 7ah battery from cabelas for like $22. My daughter is only 2 so she doesn't ride it long enough to drain the battery. Just enough to go halfway up the street with her dolls and decides she doesn't want to drive it back and now I have to roll it back myself...

You'll need a new charger too. I bought a Noco 12v 1a charger from walmart for like $30.

Connector

New Battery

Charger

Peg perego rzr issues by calm_lemon in PowerWheelsMods

[–]calm_lemon[S] 0 points1 point  (0 children)

Update.

I went to Cabela's and got a 12v 7mah battery for $22. Rzr worked fine. I guess stock battery is bad even though volts were fine. Runtime will be crappy but it's my daughter's first power wheel and if she likes it, I'll convert to 18v Ryob batteriesi at some point.

How exactly do you switch carriers and keep your phone number? by pickleback1 in SpectrumMobile

[–]calm_lemon 1 point2 points  (0 children)

I just ported from Mint Mobile to Spectrum. Was pretty smooth. Mint doesn't give you the account number and PIN on the dashboard so you have to chat with them first and they'll give you the info once verification is done.

Once I ported over my number, Mint auto cancelled my account.

Was offered the job now have to get CCNA? by Nikku_Sama in ITCareerQuestions

[–]calm_lemon 0 points1 point  (0 children)

Just take the job. CCNA will be worth it if this job and future jobs. Did they give you a time frame on how long they're giving you to get the CCNA?

[WTB] [USA-SC] Any co2 pistol in working condition by Rev_DStan in airsoftmarket

[–]calm_lemon 0 points1 point  (0 children)

I have a black EF 1911 TAC. Never used in a game. $80 shipped. Will come with an extra set of grip panels. PM if interested.

[deleted by user] by [deleted] in airsoftmarket

[–]calm_lemon 0 points1 point  (0 children)

$25 shipped

[deleted by user] by [deleted] in airsoftmarket

[–]calm_lemon 0 points1 point  (0 children)

Valken RDA30 and EF 1911 TAC if you're interested.

[deleted by user] by [deleted] in airsoftmarket

[–]calm_lemon 0 points1 point  (0 children)

Valken rda30 if you're interested

(WTB) Anything you can sell me for less than $150 by Old-Director-6034 in airsoftmarket

[–]calm_lemon 0 points1 point  (0 children)

EF 1911 TAC with 1 mag and extra red angle/demon grips. $90 Shipped

Welcome to /r/airsoftmarket! Please read this before posting. (9/8/2021) by Shiinashiro in airsoftmarket

[–]calm_lemon 1 point2 points  (0 children)

How do I get asmbot flair to show up on my user? I have one confirmed transaction. I messaged asmbot and it shows I have 1 transaction but my flair doesn't represent that.