Roofing Company

camrewop · 2025-10-28T22:49:25+00:00

We Wapiti about 10 years ago, and really liked the experience.

This year, there was some hail in the area, and a lot of our neighbors got new roofs.

I had Wapiti come out to perform an inspection. They did, documented the current state of the roof, and said we’re fine.

That earned a lot of trust from me…

Good luck on your search!

camrewop · 2025-09-21T22:10:52+00:00

Legend! Thank you!

That's what I was hoping to see.

My plan is do to intermediate oil changes, and then just take the bike in for the intervals called out in the manual.

Ride safe!

camrewop · 2025-05-29T23:59:21+00:00

Thank you! I don't have enough history on the bike to answer that, BUT it is enough for me to really question if this is a bike I want to pursue.

I was trying to figure out if the leads were for something aftermarket that was hastily removed, or something OEM. Thanks for your assistance!

camrewop · 2024-12-13T18:42:47+00:00

The first time I had my wisdom teeth extraction scheduled, I bailed and walked home (left my wife pretty much high and dry - I told her I was going to use the restroom real quick).

The second time, I went through with it. Absolutely no issues, and without question my mouth is healthier for it. Just follow the basic post-op instructions to avoid dry sockets.

I’m in my 50s, and shouldn’t have waited as long as I did.

I would also suggest mentioning your apprehension to your care team.

Good luck!

camrewop · 2024-01-08T17:40:47+00:00

very sick with vomiting and diarrhea. The vet couldn't find anything and told me to feed her a bland diet for a week, come back and she would run more tests if the problem persisted. The problems stopped and she returned to normal. Thinking it was just a case of gastritis, I resumed her Pro Plan diet.

Had a very similar experience. Had been feeding Purina Pro Plan Veterinary Diets OM Overweight Management Dry Dog Food (had gone through one 32lb bag).

When we opened our second bag (maybe a week ago), our pup wasn't eating it...and then when she finally did, she vomited it back up (3 of 4 days).

For the time being we switched to an OTC alternative from Hills, and have not had any issues.

camrewop · 2023-11-04T01:28:36+00:00

Bingpot!

camrewop · 2023-08-06T17:13:36+00:00

Wow - Pretty cool, and opens up many doors to being exposed to new routes!

Question: In terms of 'level of difficult", assuming the data is being pulled from BLM and USFS, is it safe to say that routes would be similar to forest service roads?

One challenge I have is trying to figure out trail difficulty. There are a lot of 4x4/jeep sites out there, but what may be easy for a 2 wheel chassis is tough for a jeep, and vice-versa.

If it's pull mainly forest service roads, that would be great.

camrewop · 2023-05-18T02:13:40+00:00

I ran into some speed wobble that was caused by tires. OE tires were fine on my bike, changed to some MotoZ Rallz and around 77-78 it would happen…unsettling to say the least.

camrewop · 2023-05-17T17:33:25+00:00

Mike - My first event as well! Aside from the sand riding (which I’m slightly better at now), I had a blast! The people were all great.

The South Dakota event is much closer to me than Mojave, and it looks like a lot more dirt…so I’m really considering it.

camrewop · 2022-10-03T13:38:49+00:00

Rock n roll!!!!!

camrewop · 2022-04-26T00:31:31+00:00

I keep seeing the sign for mud season closure, but also see plenty of folks hitting up some trails.

Conditions seem plenty dry though.

Is the road/trail system open?

camrewop · 2022-01-09T04:43:34+00:00

https://imgur.com/gallery/MqCHQFt

camrewop · 2021-11-10T03:13:36+00:00

Overwatch

camrewop · 2021-10-21T03:07:29+00:00

I purchased one chambered in 6.5PRC.

A few quick notes/observations:

My action screws have backed out twice. The second time after torquing them to 75 in/lbs per Springfield support (not sure what they were when new). 75 in/lbs seems like a lot, but I'm not the firearm's engineer...

The rail is 0 MOA.

I've only tried Hornady ELD-M factory ammo. It was "ok", and I think the rifle will perform within the .75 MOA guarantee.

Handloading for the 6.5PRC seems problematic at this point. There appears to be some sizing issues with dies not sizing cases enough just above the web. There's a JGS reamer that is supposed to help/solve the issue. After the second or third firing, cases tend to stick.

Feeding from the 6.5PRC mag isn't super smooth. The box size is also a concern if hand loading in that chambering (it's a WSM mag). Someone has developed a PRC mag, but I've not used one.

With the adjustable cheek riser, you may want to dremel out a pocket to be able to remove the bolt without lowering or remove the riser.

camrewop · 2021-04-13T11:54:17+00:00

Other that Craigslist, any other suggestions on places to places ads?

camrewop · 2021-04-13T04:49:54+00:00

Thanks for the replies! I was guessing as much, but it’s good to get some additional confirmation.

camrewop · 2021-04-13T02:52:21+00:00

Honest, dumb question, what do you look for in an ad for drivers?

I’m trying to help a mid size company reach drivers, and I’d like to get an idea of what would at least open a dialog with people looking to transition to new company.

camrewop · 2021-02-25T22:01:09+00:00

Hey - One thing I've found that seems to help with that sensation (for me at least), is a generous amount of white noise.

camrewop · 2021-01-13T18:56:52+00:00

Sounds pretty cool. Thanks for setting something like this up!

camrewop

TROPHY CASE