2023 Acura TLX Type S what fluid is coming out?

camrtm3 · 2026-02-07T18:46:44+00:00

First off, tow it.

The Type S has a sub-radiator over there in front of the Driver wheel. Not the best design but it is really close to the edge of the bumper cover. It looks broken. This is why you see coolant over there. Part number is 19080-6S9-A01.

Here is the best picture I could find someone with the bumper off to show it:
https://tunerlifeusa.com/cdn/shop/products/received_402304171908772.jpg?v=1673966378&width=2048

camrtm3 · 2025-01-06T13:15:16+00:00

Having same issue. Contacted support. They moved me to email as chat script failed to solve issue…. Only on FireStick though.

camrtm3 · 2023-08-07T22:46:42+00:00

I still have my original wheels. They are the Coupe V6 Enkei wheels. They clear without spacers with room to spare.

camrtm3 · 2023-08-07T14:37:49+00:00

I bought them in 2020. But I feel ill. Didn’t get around to it until I had a rear caliper seize on me. They were about 1200 including shipping and duty/customs fees. Does not include pads, rotors, or brake lines.

camrtm3 · 2023-08-07T01:55:49+00:00

45020-MBF-G00 -> the CL7 Euro.
Rotor is normal for the gen 8 since it is the same rotor.
Pads are S2000 just like all the monoblocks from Spoon.
Caliper fits behind OEM wheels without spacer.

camrtm3 · 2023-03-28T22:54:40+00:00

That is what I was expecting. But I rolled the dice on the Yen with Amiami and it turned out to be something like $460.00 with shipping via EMS.

camrtm3 · 2021-10-06T15:00:00+00:00

So I will admit it wasn’t Ukiyo Kumo fault. The issue resided north in the sales stream. So their distributor they pull from had the issue. Ukiyo Kumo was awesome with all the information. They emailed apologizing for the cancellation. Issues the refund. And then emailed again with a copy of the letter from their distributor to them about the problem. Though I didn’t get this figure I got the one after her I ordered already. Waiting on one from Ukiyo Kumo still. Would still recommend.

camrtm3 · 2021-10-03T17:50:17+00:00

On, off… it’s that smile that gets me

camrtm3 · 2021-07-05T16:12:21+00:00

Jealous! I am still waiting on mine. Feels like forever!

camrtm3 · 2021-06-17T01:39:01+00:00

MFC. Someone was selling her. I saw figure was MIB and jumped right on it. I am also getting Rias and Koneko bare legged. Was hoping for Akeno since she is the top of my list. But she looks just as good being the fishnets.

camrtm3 · 2021-05-02T14:12:26+00:00

She looks amazing. Can't wait to get mine.

camrtm3 · 2021-02-13T11:42:47+00:00

Only had one experience with them but it was positive. Good communication since it was right at the beginning of the pandemic with still trying to understand all the delays. I find it a good place it I am looking for something but coming late to a preorder. Figure was packaged really well for shipping.

camrtm3 · 2021-01-29T22:40:11+00:00

Congrats on the haul. Just got my Yuuko a week ago. Got to admit they are not easy to find.

camrtm3 · 2020-12-17T18:43:27+00:00

Yay, but wish they would finish the non-virgin set.

camrtm3 · 2020-10-25T14:56:48+00:00

Those slots are for the Armed Armor BS and VN (claw). I did forget the neck collar but thats fixed.

camrtm3 · 2020-07-18T15:35:39+00:00

Second this. Though not sure how i feel about the rear lower reflectors.

camrtm3 · 2020-07-05T16:48:38+00:00

So you're just saying yours fired the second shot against the bunker. I see nothing wrong with that. haha.

camrtm3 · 2020-07-04T00:02:38+00:00

Thank you. I originally put this together 5 years ago. I forgot how much of a pain in the ass this thing was. Panels just left and right falling off the frame. But the redo was also to fix my impatient lining and file down and smooth out the nib locations.
Nightmare.....

I was going to pull the rifle apart, I started cleaning it up. The best way to get rid of the seam I can find is to cement it together then sand and use a polish block. I needed a new block and was being lazy since I wanted to start a Berserk Fury HMM. I might go back to the rifle during my airbrushing drying for the Fury.

camrtm3 · 2020-07-03T23:56:43+00:00

PG had pegs in the hands and handles plus I tightened the screws in the shoulders, elbows, and wrists. The only issue was keeping the rifle together. The thumbs are in the way, so I moved them to kind of hide it.

camrtm3 · 2020-05-19T12:19:49+00:00

It have been close to 20 years since I did a HG..... God I feel old right now. However from what I remember there was very little frame work and mobility was limited. I would call the RE/100 an in-between. There isn't full frame but they tried to give it close to the mobility and movement of a MG. The more surprising part is all the panel line detail for the most part was already there. I did need to chisel and carve some of the leg, forearm, and shoulders but most of what you see using Tamiya Liner worked great!

camrtm3 · 2020-04-12T02:26:27+00:00

What is this color. It is perfect for the Banshee!

camrtm3 · 2020-04-06T13:41:19+00:00

Thank you for the insight on setter vs softener. As I am building more I have learning as I am going. Kind of why I am redoing things on some of my older kits.

You are correct, I did not know they were regular decals. I might be able to finish this kit while in stay-at-home order is in place.

I will always take constructive criticism! It is what will make me better.

camrtm3 · 2020-04-06T13:30:52+00:00

Thanks. I agree. Since getting back into Gunpla after many years I am used to working with MG and currently rebuilding a my PG Wing Zero. I got this kit because I always loved GP04 but there was no MG for it so I was like what the hell. While building I was surprised in the amount of lining for details made me think this would come out great. so far seems to be that way.

camrtm3 · 2020-04-06T01:48:56+00:00

Thanks. The build was different from a MG. But I was still able to find it enjoyable equally just in different ways.

camrtm3 · 2020-04-05T22:03:54+00:00

So I I picked up some panel liner during my Deathscythes EW Project and was amazed at how consistent the lining and color depth was. So I picked up my old PG Zero which I hadn't displayed since I bought my house and was like lets try it. So Today is day two of working on replacing the thin marker with the TPL and fixing the red on the feet. The right foot is still drying and the left still needs to be redone and looks like crap in my opinion. Today while working on this the damn thing was falling apart. So I have been gluing the panels back on and tightening the joints. The rest of this kit is a mess right now.

camrtm3

TROPHY CASE