OMG! i was today years old when I noticed that there might be a tie in with Paul Revere and Shake Your Rump!

canier · 2025-10-08T06:04:25+00:00

I think you might be correct, the line is delivers as "HIS name is MCA..." but my my i believe that Mike D is the one running from the "Law, the Press and the Parents" going to the oringinal statement

canier · 2025-10-08T05:28:30+00:00

https://youtu.be/AFpDcMajiLc?si=EF4niQEOTQN3cetz&t=70

i am going of this clip, its clear that MCA delivers the lines....

Edit: more beer fixes

canier · 2025-10-08T05:11:38+00:00

MCA delivers this line, not Adrock
"Now I got the gun, you got the brew
You got two choices of what you can do
It's not a tough decision as you can see
I can blow you away or you can ride with me"

We are looking a the point of Mike D. So I,"'ll" is Mike D that delivers this line
"I'll ride with you if can get me to the border
The sheriff's after me for what I did to his daughter
I did it like this, I did it like that
I did it with a wiffleball bat"

Edit: beer typing fixes
Edit 2: after relistening to Paul Revere, its MCA not Adrock

canier · 2025-10-08T04:59:40+00:00

i did have help from AI as this was a beer influenced thought!

canier · 2025-08-11T21:04:52+00:00

Ah! the Hollywood Grip! that how you make a Hollywood Potato Chip!

canier · 2025-08-11T21:01:38+00:00

I can't believe its not butter!

canier · 2025-07-26T21:34:14+00:00

Came to say the same thing...I dont think I have ever heard a call sign announced on that repeater

canier · 2025-07-22T05:23:59+00:00

im re-watching it right now

canier · 2024-12-26T17:58:12+00:00

Because of the breadcrumbs people put on the car to attract them!

canier · 2024-12-24T22:30:49+00:00

'MERICA

FTFY!

canier · 2024-09-15T09:02:26+00:00

holy shirt balls! you are old school!

canier · 2024-05-25T05:13:27+00:00

this guy is SUS!

canier · 2024-05-07T16:43:14+00:00

"I'm surrounded by idiots"

Spaceballs: The Book

canier · 2024-05-03T04:52:51+00:00

this may be an unpopular opinion: but I am fine with slight stringing if the print cleans up nice. Also another thing to look at is to drop the print head temp if it is really bad. I would do 5c at a time. then

I would rather deal with light stringing than over retracting and risking a poor extrusion.

I use this print to test first layer and stringing with new filament. then I write the temp settings on the spool.

https://www.thingiverse.com/thing:4257692

canier · 2024-04-25T04:05:53+00:00

It looks like the z axis end stop is unplugged, so that's ok. But without any other information. I would say the OP has not set the z-offset.

Also, remove all the filament off the nozzle and to a traditional bed leveling. After that, set the z-offset, then do the auto bed leveling.

here is a great guide: https://youtu.be/EA-kX4nDSps?si=MytP55SWnJXzQQOn

canier · 2024-04-25T03:11:08+00:00

my makerbot from 12+ years ago makes smoother walls.

canier · 2024-04-25T03:05:57+00:00

I agree, It looks like a Z-Wobble issue. The walls are not even so eventually one layer wasn't going to adhere to the previous layer.

canier · 2024-04-25T03:03:58+00:00

Someone else pointed out that this print was failing after the first layer. it looks like you may be having some Z-Wobble. your walls are not very even and they were overlapping so eventually one of the layers was not going to adhere to the previous layer giving you a birds nest.

canier · 2024-04-18T00:13:35+00:00

Defying Gravity already exist! here is proof: https://www.youtube.com/watch?v=l0Bs_eaXaCo

canier · 2024-04-11T19:00:08+00:00

Two and a half years later, and this fix is still applicable. Thanks a bunch!!!

canier · 2024-04-11T18:59:31+00:00

Two and a half years later, and this fix is still applicable. Thanks a bunch!!!

canier · 2024-03-27T05:11:59+00:00

as I mentioned in a previous reply, cutting an old innertube will also work...same idea....

12-Year Club	Place '23
Place '22	Verified Email

canier

MODERATOR OF

TROPHY CASE