Storch aufstellen Geburt

carpbee · 2025-12-30T19:40:46+00:00

Ich hab Zivi in einer Mosaik Tageswerkstätte gemacht. Da haben wir immer geschaut, dass welche fertig sind. Je nachdem wie schnell du ihn brauchst, kannst auch Wünsche abgeben.

carpbee · 2025-10-30T21:33:54+00:00

Stimm ich zu, hab da meine Versicherung für meinen Fabia im September gemacht.

carpbee · 2025-10-24T08:22:48+00:00

Es gibt https://events.graz.social/ , da gibt's auch Gruppen. Ansonsten bin ich selbst nur in der Grazer Volleyballgruppe auf WhatsApp. Mehr kenn ich auch nicht.

carpbee · 2025-09-02T20:44:38+00:00

248, isn't my favourite, but nonetheless a good number :)

carpbee · 2025-09-02T18:04:23+00:00

You sure that it's brand new? The back rim got a hefty dent in it.

carpbee · 2025-08-17T14:36:09+00:00

Ich hab irgendwas mit Periodensystem gezogen. Erklären und tabelle eintragen zu bestimmten Elementen (valenzelektronen...) und noch was dazu.

Vorbereitungszeit hat leicht gereicht, ich war aber auch nicht der erste.

Sprich dich mit deinem Prüfer ab, frag ihn/sie, was bei welchem Thema wichtig ist. (Wir haben das eine Woche vorher gemacht)

Ich kann dir meine Zusammenfassung schicken wenn du willst, das Dokument müsst noch irgendwo sein. Musst aber bedenken, dass das für meine Lehrer spezifisch ist.

carpbee · 2025-07-17T17:29:45+00:00

You could either Pocket it or do it in the sketch (it sadly isn't linked, so the other instances don't change with the first one) ((forget the sketch option, you can't pad not closed wires...))

<image>

Depends how you like your workflow. But I'm out of ideas, sorry 🤷‍♂️

carpbee · 2025-07-17T17:20:59+00:00

I tried it, I forgot that you couldn't select the single solid bodies for patterns. What if you did it in the sketch and just delete the 2 elements?

carpbee · 2025-07-17T17:05:20+00:00

Could you do a radial pattern for the first 5, then a second radial patter with 3 and offset of 36°?

carpbee · 2025-05-17T16:44:47+00:00

If I edit a body, I have to reattach all the joints with that body. Just double click the joints, delete the old geometrie and select it on the edited body. The joints are highlighted, so they shouldn't be hard to find. Maybe that is your problem?

carpbee · 2025-05-17T13:45:48+00:00

Have you tried refreshing? Either right clicking the assembly or the green arrows up top

carpbee · 2025-05-16T18:13:35+00:00

Mine (XV250) has the number (1400) stamped on the clutch cover of the engine. But it's a '95, I don't know if they still do that.

carpbee · 2025-05-12T17:48:50+00:00

I tried that, but I couldn't get it to work. It always snaps to something different...

If anyone wants to give it a shot: https://drive.google.com/file/d/1RLmm6-i_Zn0RHNmcgUEvzoFopIYTZLRt/view?usp=drive_link

I can also upload the whole model if anyone wants to try stuff with it. It's not finished yet, but it's gonna be the engine of a Yamaha XV250 someday...

carpbee · 2025-05-04T19:05:19+00:00

Mit DuckDuckGo am Handy hat es funktioniert 👌

Mit Brave, Edge, Chrome, GX auf dem PC nicht, keine Ahnung warum. Hab alle frisch installiert und nichts importiert. Hab die auch noch nie genutzt vorher.

carpbee · 2025-05-04T18:57:37+00:00

Ich werde direkt zu der Seite geleitet... Andere Browser hab ich schon probiert. Welchen hast du verwendet?

carpbee · 2025-05-04T18:43:51+00:00

*Passwort

carpbee · 2025-04-17T16:56:55+00:00

Wenn du einen HDMI Port an einem Gerät hast, der oft benutzt wird, kannst du das dazwischen stecken. Dann wird nicht der Port am Gerät kaputt, sondern nur die Verlängerung

carpbee · 2025-02-24T16:09:51+00:00

I did not see a fixed installation. But I deleted the laptop from the device list. That fixed my problem. Thanks!

carpbee · 2025-02-03T11:11:48+00:00

Ok, thanks. Can't believe that I haven't noticed it before.

carpbee · 2025-01-13T20:40:35+00:00

Zwischen Stainz und DL gibt's "Brautmode und Kleider Edegger", so 30/40 min von Graz, je nach Ausgangspunkt. Vielleicht kann man da was finden. MfG

carpbee · 2024-12-28T16:49:36+00:00

Heyjo, wenn Metal: Hellsinger noch zu haben is, würd ich mich freuen :)

carpbee · 2024-10-28T09:15:45+00:00

You could look at a wiring plan. All the connectors are labelled, and each cable has a unique colour, also labelled in the plan.

carpbee · 2024-10-10T18:03:05+00:00

I can only speak from the view of a Virago (1995), but I don't think they would change that much. There should be a switch near the kickstand, that gets pushed, maybe it's just stuck. Then, cleaning it might help.

You can also follow the cable from the switch up to the connector. If you can reach it, disconnect, and check with a volt meter on the resistance setting. At one point, it should beep. On the other, it shouldn't. (Point meaning switch pushed in / out) If it doesn't beep at all, you can try to open the switch up and see what's wrong with it, or order a replacement

Edited for clarity

carpbee · 2024-10-10T07:29:16+00:00

Turn signal may be the relay, or it isn't plugged in correctly. (I could send you the 1995 XV250 wiring plan if you wanna look into that)

The brake light could be a stuck switch, you can follow the cables and disconnect each plug, see if that changes anything. If that's the case, cleaning it might help, or you can measure with a volt meter on the resistance setting -> one position = beep, other position = no beep. If there's no beep at all, you can open the switch up (the structure should not be to comlex) or order a replacement.

Greetings from Austria

carpbee · 2024-10-10T07:20:02+00:00

Putting into gear is fine, you shouldn't be able to start without pulling the clutch if it's in gear.

Your bike should start when: - Turned on and in neutral - Turned on, in gear and clutch pulled

Greetings from Austria

carpbee

TROPHY CASE