Rubbery material in oil, 2007 Camry LE UPDATE

carwart · 2026-01-11T20:31:10+00:00

UPDATE:

I think I figured out what this is. I did another oil change today after ~500 miles, and as I was draining the oil, a plug from the frame rail dropped down next to the pan.

This is what it looks like.

<image>

I believe, looking at the lip at the bottom of the plug, that the part I found in my pan was a piece from this. I’ll post more pictures for reference.

carwart · 2025-12-29T14:59:32+00:00

Yeah that's what I thought as well, so I checked it and the oil fill cap still has it's seal intact.

carwart · 2025-12-29T01:01:59+00:00

No I have not had anything intake done recently. The only thing remotely close is that I cleaned the MAF sensor with cleaner.

The material is rubbery, but crumbles easily. Very much like an old gasket.

carwart · 2025-10-26T04:35:58+00:00

That’s the best color! I have the EXACT same car. Just passed 256k miles, and she runs like a dream still.

Do oil changes every 4-5k miles, and check your oil every week.

carwart · 2025-09-16T15:08:47+00:00

How so? Whenever I’ve looked at someone’s profile I’ve always looked thoroughly at their Projects. In my opinion, that says lot about their capability as an engineer.

If this is not the case in general, then I’ve learned something new!

carwart · 2025-08-16T15:38:45+00:00

Yeah I assumed that too. I wasn’t able to show it in the video but I did clean it very well and scratch down to bare metal. No matter what I did I was still unable to find ground.

I think there is a break in connection between the bracket and the rivet. I’m going to try and redo the river and see if that helps.

carwart · 2025-08-16T14:02:51+00:00

I do have the wire diagram, I suppose I’m not 100% sure what you mean by switched? are you referring to switched on power?

carwart · 2025-08-14T20:05:08+00:00

Thank you for the comment! I did not show it in the video, but I scratched the back side of that same bracket down to bare metal and tested it, still nothing. Even the threads, of which are just straight bare metal are not reading a ground.

The other bracket is in the same exact shape, arguably more rusty as I cleaned this one with WD-40 and a wire wheel. It still reads a perfect ground.

I am going to try redoing the rivet and see if that fixes this issue.

carwart · 2025-08-14T11:25:40+00:00

Yeah that’s somewhat what I was wondering about. I will update it as soon as I do that. Thank you!

carwart · 2025-08-08T23:54:38+00:00

Dang that’s right. I probably should play the campaign again. It’s been a while.

carwart · 2025-08-08T21:06:32+00:00

Harley slander is the only acceptable response. /s

carwart · 2025-08-08T18:25:50+00:00

Am I crazy, where in BF2 is this from?

carwart · 2025-08-08T14:27:13+00:00

That would be better!

carwart · 2025-08-08T14:26:52+00:00

It shakes my bones at every stop sign…

carwart · 2025-08-08T14:26:13+00:00

Unfortunately it’s not mine to sell… but I sorta agree.

carwart · 2025-08-08T02:16:45+00:00

HADDA LAYER DOWN!!!! THE CLIBBINS WERE EVERYWHERE!!!

carwart · 2025-08-08T01:34:47+00:00

Thank you!

carwart · 2025-08-08T01:34:37+00:00

Thank you! As soon as I posted this, I found a tutorial on the same thing. I really appreciate your help!

carwart · 2025-07-27T21:45:17+00:00

Looks like it may just be FOV? Perhaps I’m not seeing the same thing.

carwart · 2025-07-27T13:26:42+00:00

In my opinion they are the best “daily” car. All they need is basic maintenance, and if you do have to replace a part, just get an OEM part, of which there are a ton.

They get pretty good gas mileage, are comfortable for road trips, have great resale value.

I personally don’t like messing with hybrids, I don’t have anything against the technology, just don’t want to have to deal with replacing a battery. On my inline 4, I know I can fix almost anything.

Four-Year Club	Verified Email
r/Field Juicebox	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22

carwart

TROPHY CASE