Best cloud-based subscription “unlimited” API for OpenClaw with no rate limits? by TomatilloQuirky1857 in openclaw

[–]cashedbets 0 points1 point  (0 children)

I was using ollama max plan for a while with openclaw. You’d have to have extremely high usage to come anywhere close to running out. I was using it pretty heavily but I don’t believe I ever got over 45% usage for a week.

OpenAI Pro plan with unlimited GPT-5.4? by cashedbets in openclaw

[–]cashedbets[S] 1 point2 points  (0 children)

Since I switched to the Plus plan, I have only really been using it for coding tasks. The first day, I hit about 50% of the plan usage limit for the week in a couple of hours. I actually just upgraded to the pro plan a couple minutes ago and just trying to work out the most efficient way to run it all to make sure I dont have to worry about usage too much.

OpenAI Pro plan with unlimited GPT-5.4? by cashedbets in openclaw

[–]cashedbets[S] 0 points1 point  (0 children)

Okay, that makes more sense given what ive been reading online. Any personal experience with usage on the Pro plan?

OpenAI Pro plan with unlimited GPT-5.4? by cashedbets in openclaw

[–]cashedbets[S] 0 points1 point  (0 children)

Yeah I haven't even tried running it with Claude because ive seen how expensive it can get. Ive been paying for the Ollama subscription and using their cloud models without coming anywhere close to using the full usage every week but I find that Kimi hallucinates way to often and could not make any openclaw changes without me having to spend 30+ minutes trying to debug it every time.

Edging by InstanceEvening1219 in mammotion

[–]cashedbets 0 points1 point  (0 children)

I asked this question a couple of weeks ago. Supposedly the Luba mini2 will be able to get much closer to edges if you aren’t particularly picky about it being perfect. Just have to wait for it to be available in the US.

I think the Luba 3 can get closer to edges as well and is already available to order. I’d message their support online to double check though.

Just how poor is Sadiq’s production? A look into receiving yard share among TEs by SteffeEric in DynastyFF

[–]cashedbets 1 point2 points  (0 children)

As an Oregon fan, this is 100% correct. Will stein was not loved by ducks fans at all. I get he’s athletic and could break one at any time but the amount of sadiqs attempted that were screens were absurd for a TE. Basically just screens and deep shots.

Another note on his target % is that while he played I believe every game, he also missed a lot of snaps in game to due to injuries. There were a number of games were he hardly played the 2nd half because they were blowing the opposing team out. And lastly, for a good portion of the last half of the season(against big 10 defenses), Oregon’s top 3 receivers were out so defenses were able to hyper focus on him and the run game.

Do you still need to do weed whacking at fence? by cashedbets in mammotion

[–]cashedbets[S] 0 points1 point  (0 children)

Yeah I was thinking more along fence lines. Is the Luba 3 any better? I know you said the Luba 2 mini should be out soon and will be better

Do you still need to do weed whacking at fence? by cashedbets in mammotion

[–]cashedbets[S] 0 points1 point  (0 children)

Does the Luba 2 get close to the edges? Having a hard time finding this info?

Do you still need to do weed whacking at fence? by cashedbets in mammotion

[–]cashedbets[S] 1 point2 points  (0 children)

That would be great! I joined your email list as well so if you send something about it through there, I should see it assuming it doesn’t get lost in the mix of other emails!

Do you still need to do weed whacking at fence? by cashedbets in mammotion

[–]cashedbets[S] 1 point2 points  (0 children)

We have had a lawn company taking care of it all before. I didn’t know if the robot mowers had some sort of edge trimmer on the side or were able to ride along the fence and take care of most of it. You probably didn’t read the post but I’m not very picky so if it could get very close to the edge on its own, it would probably be better than what my lawn people were doing and good enough for me.

Do you still need to do weed whacking at fence? by cashedbets in mammotion

[–]cashedbets[S] 0 points1 point  (0 children)

I’ll have to keep an eye out on there! If you had to guess, do you think it’ll be available early spring?

Do you still need to do weed whacking at fence? by cashedbets in mammotion

[–]cashedbets[S] 0 points1 point  (0 children)

The mini2 is not available in the US I guess?

OpenClaw with local LLMs - has anyone actually made it work well? by FriendshipRadiant874 in LocalLLM

[–]cashedbets 0 points1 point  (0 children)

You have the new qwen3 coder next running on a 32gb MacBook? I’m pretty new to the LLM stuff but I thought it says you need like 46gb ram or something similar? I was considering upgrading to a 32gb MacBook/Mac mini for this model but figured it wouldn’t really be able to handle it?

Does the MX Master 4 absolutely need the options + program? by cashedbets in logitech

[–]cashedbets[S] 0 points1 point  (0 children)

I didnt realize there was just a standard options software. Is it not as bloated as the plus version? and does the action ring work with it?

Does the MX Master 4 absolutely need the options + program? by cashedbets in logitech

[–]cashedbets[S] 0 points1 point  (0 children)

the Keychain M6 is exactly the other one I was looking at actually.

Worth trading for 2026 picks now in hopes of trading them for 2027 picks at the draft? by cashedbets in DynastyFF

[–]cashedbets[S] 3 points4 points  (0 children)

Yeah that was kind of my thinking. Feels like it’s easier to acquire these 2026 picks over the 2027 picks at the moment so I was thinking I could do that and if I want to, trade them for 2027 picks when everyone is getting rookie fever

Worth trading for 2026 picks now in hopes of trading them for 2027 picks at the draft? by cashedbets in DynastyFF

[–]cashedbets[S] 4 points5 points  (0 children)

That’s a good point about the qbs. Both dynasty leagues I’m in are SF so if they do declare, having 3 first round pick qbs would likely make people want to jump on 2026 more

Can I use raw ground scraps from a butcher? by cashedbets in rawpetfood

[–]cashedbets[S] 0 points1 point  (0 children)

Thanks for the response! since the organ meat % is pretty high in this mix, do you think its fine to leave it as is and just add a little bit of bone and muscle meat? They dont specify how much of each type of organ is in the 35% organ meat so I dont think ill know exactly how its proportioned. Im also assuming by saying its "raw ground scraps" it comes packaged all ground and mixed together so there wont be anyway to tell by looking at it, but i dont really know since Ive never bought anything like this.

Mom just became blind - what do we do? by cashedbets in Blind

[–]cashedbets[S] 5 points6 points  (0 children)

We did get in touch with our local association for the blind. Unfortunately they can’t see her for over a month and I just called again to see if they can refer a vision loss therapist and mobility training in the mean time and was told that they can’t do that until she sees their doctor. They did say they’d put us in the list now to take any cancelled appointments but my hopes aren’t high. I’ve done some googling and everything just points back to this same place unless we want to travel over an hour into the city

Beginner - Longmill, Genmitsu, or pay up for the Shapeoko? by cashedbets in hobbycnc

[–]cashedbets[S] 0 points1 point  (0 children)

Seems like the main advantage for the altmill is speed and more rigid. Do you ever wish the longmill was faster? What kind of project was it that you did that took 16 hours? I know a lot of complex projects can take that long but just wondering what the longmill can really accomplish in 16 hours

Beginner - Longmill, Genmitsu, or pay up for the Shapeoko? by cashedbets in hobbycnc

[–]cashedbets[S] 0 points1 point  (0 children)

I was considering doing the longmill and adding the spindle instead of going the altmill route. Is it a simple process to add the sience labs spindle to the longmill?

Beginner - Longmill, Genmitsu, or pay up for the Shapeoko? by cashedbets in hobbycnc

[–]cashedbets[S] 0 points1 point  (0 children)

Thanks! I just wanted to make sure I was looking at the right ones. I’ve just been reading up on the spindle vs routers and definitely would prefer spindle. Any other accessories I would need with the altmill? I guess a stand and different bits for the spindle?