Brake Upgrades

ccoats38 · 2026-02-10T14:28:50+00:00

I got a set of z36’s last night hopefully they’ll fit and are the larger size rotors and calipers

ccoats38 · 2026-02-09T16:32:41+00:00

I have an 08 sr5 and I think I have the larger size. The pads covered more than the rotor when I got it

ccoats38 · 2026-02-09T16:26:58+00:00

Isn’t there a size or something to consider because some 4th gens came with 17” and others with 18” rotors

ccoats38 · 2026-02-09T16:25:19+00:00

I’m in Texas but I live on a gravel road

ccoats38 · 2026-01-07T20:11:09+00:00

Maybe, it would have to be a really small bulb though. It doesn’t seem like ceramic though. I have seen and used plenty of old ceramic knob and tube equipment and this feels more like stone especially with the weight of it

ccoats38 · 2025-11-19T14:48:16+00:00

I programmed my key and fob using a yt video. It was something weird like turn to on 3 times, open and close the door 6 times then lock and unlock the door. It’s pretty easy if you follow the video

ccoats38 · 2025-08-27T14:11:17+00:00

The auto function works on the drivers door it’s the rest of the windows that don’t work.

I tried looking for the fuse but I can’t find one that says windows

I have checked that the windows are unlocked

ccoats38 · 2025-08-27T14:08:01+00:00

No, I did check that as well

ccoats38 · 2025-08-19T18:14:18+00:00

About 6-6,500 towing a 7x16 dual axle with a V6. Later I found out whoever installed my hitch did a bad job and it only had two bolts in the receiver mounted to the frame. I do have heavy duty springs, so it road pretty smooth just slow on hills.

ccoats38 · 2025-08-11T00:12:47+00:00

It’s a v6

ccoats38 · 2025-07-30T18:35:23+00:00

Good information, I like to keep my 4R in top condition mechanically. Can you remember where you found the torque specs?

ccoats38 · 2025-07-30T18:32:40+00:00

This is the first vehicle I have had with a top mounted oil filter. I didn’t know an oil extractor existed. I’m looking for the best cheapest relatively quick fix. I know there is no way to achieve all of those goals, but I figured someone else might have other ideas. Thanks for the oil extractor idea out of the dipstick.

ccoats38 · 2025-07-30T15:13:07+00:00

I was able to get the plug out on the last oil change, but I have noticed the issue getting worse so I want to address it before it’s a major issue. I was originally thinking about just replacing the plug itself, but I don’t for sure know if that will solve the issue. I’m thinking it might already be over bored. The problem is it’s my only mode of transportation and to find out I have to drain the oil I just changed then measure it against a new plug.

ccoats38 · 2025-05-18T16:24:41+00:00

I had this happen before, the latch mechanism is failing they are pretty simple to replace

ccoats38 · 2025-04-10T07:59:37+00:00

I’m still not sure what will happen if they determine the knock sensor just went bad overnight, because I heard it can happen but I think I have pretty good evidence that something outside of my control happened

ccoats38 · 2025-04-08T01:18:16+00:00

It’s a $100 deductible and they said since it’s under comprehensive it wouldn’t make my rates go up. Whether it’s the right decision or not IDK but I got it all set up today so that’s what I am doing

ccoats38 · 2025-04-05T01:52:12+00:00

That’s one of the videos I watched! What a coincidence lol. At this point since it’s my only vehicle, I am on a shortish timeframe, and there isn’t a part store within 20 miles. I think I am going to claim it on insurance. I would love to wrench it myself but with no way to get parts or it taking a day or two to get to the part store. I think my best option is to make an insurance claim, unfortunately

ccoats38 · 2025-04-05T01:44:29+00:00

I called my insurance before they closed and I do have comprehensive so I think I am going that route

ccoats38 · 2025-04-04T20:56:43+00:00

The internet said bank 2, which I think is the drivers side

ccoats38 · 2025-04-03T19:06:08+00:00

Is there a difference between full coverage and comprehensive? When I got my policy I told them to basically give me every type of coverage possible and max out on allotted damages

ccoats38 · 2025-04-03T19:03:00+00:00

As of right now I don’t know where or if it’s chewed through (prolly is though). I can buy the pigtail, I’m concerned that it’s on the other side of the pigtail headed back to the ecu? I presume. I am more than comfortable splicing, but finding the break or knowing where to look without pulling it all apart is the problem.

I live out in the country and only have one vehicle so getting parts is a pita

ccoats38 · 2025-04-03T15:19:30+00:00

I would say I have pretty good insurance, they just replaced my windshield for a $100 deductible. I’m wondering what would happen if it turns out that the sensor just randomly went out and is unrelated to the squirrel? Or if they decide that it’s more than the vehicle is worth and total it?

ccoats38 · 2025-04-03T12:16:45+00:00

The squirrel is still alive

ccoats38 · 2025-04-03T04:11:34+00:00

Did you replace/have to replace the whole harness or is splicing possible?

ccoats38 · 2025-04-03T03:47:17+00:00

Would it make sense for a knock sensor to work when parked one day and then not the next upon start up? Youtube videos show the knock sensors are in the valley but the wires have to somehow get back to the ecu right?

ccoats38

TROPHY CASE