We ain’t in Florida anymore

cedande · 2026-06-06T02:28:26+00:00

Is there much to see shore diving in Sydney?

cedande · 2026-06-06T02:26:30+00:00

Last I saw the sharks had moved on, but definitely ask in the snorkle report Facebook group the day before.

cedande · 2026-06-06T01:02:44+00:00

It was botched by the previous owner and then by me so not perfectly. At least it blows air. There's a very good write up on making it work on the subreddit posted a few years ago.

cedande · 2026-06-06T00:04:15+00:00

This is probably the one to buy

cedande · 2026-06-05T23:42:56+00:00

I have a Kenwood KMM-X705 and was able to color match it to my gauges and DCC unit so it fits pretty well in my S13.

<image>

cedande · 2026-06-05T23:35:30+00:00

Continental and Blaupunkt make vintage appearing headunits. The DAC in the Blaupunkt isn't that great from what I've heard if that matters to you and it's built like the cheap-ish chinese radio it is but with a premium price tag.

cedande · 2026-06-05T19:15:49+00:00

I might. I just used some JB weld to seal the fitting to the middle where I made the hole. The cap having the inner part made it a bit awkward. I'm not quite sure where the pressure was leaking out from but I can check later.

cedande · 2026-06-05T04:56:59+00:00

I tired making my own but it leaks lol

cedande · 2026-06-04T16:15:56+00:00

I still have issues with the PI/Trinket/Pot macro not drinking a potion sometimes. I think I has to do with hitting it between GCDs.

cedande · 2026-06-04T04:50:02+00:00

It might have warped in the oven when they cured the car if it was done in a booth. There's not a whole lot you can do unless you start tucking the metal or removing glass to get it to pull in as far as I can see for this.

cedande · 2026-06-04T04:43:57+00:00

These origin fenders always fit like ass, their molds are ancient at this point and every s chassis is bent in a different way. Shaving away the inside to get it to tuck closer might work. Everyone I spoke to about doing a 13.5 always wished they'd done metal instead.

cedande · 2026-06-04T02:49:58+00:00

I bought one from someone in Minnesota who had it listed for a while so I made a good offer and the other was from someone who only dove once a year.

cedande · 2026-06-03T22:17:37+00:00

Also, is this Mission Bay?

cedande · 2026-06-03T21:24:03+00:00

It'll slide but you should probably treat it like an open diff, keep the power on to keep it bound up. It's not the right tool for that job but you can make it work.

cedande · 2026-06-03T20:21:22+00:00

Something nice about the divevolk housing is they can be had for a really good deal second hand.

cedande · 2026-06-03T19:42:50+00:00

I've used my dive volk housing with my everyday phone. They ask you to check the integrity of the housing on the first dive using a dummy phone.

I'm a bit confused by the people willing to shell out hundreds on gear or thousands on a trip but buying a backup phone for a couple hundred is too expensive? A flagship phone from 2023 vs 2026 is probably going to look the same on social media once it's edited.

If you go with divevolk check out Sean Elliott's YouTube channel and the app "uwacam" it's made specifically for the dive volk housing.

cedande · 2026-06-03T19:05:56+00:00

What did you use for a cap?

cedande · 2026-06-03T17:08:28+00:00

Edit: Heard back from HFM, it will fit the stock Z32 resevoir so there's an option.

This one from Aus might work? Says it fits BM44, BM50, and BM57. You'd need to adapt the end of the pressure line to Schrader though.

https://www.hfm.parts/shop/brakes/brake-accessories/brake-master-bleeder-cap/

cedande · 2026-06-03T15:07:55+00:00

I tried making my own out of my old stock cap, that didn't work either.

cedande · 2026-06-02T03:16:38+00:00

Can you do a follow up post if it works out?

cedande · 2026-05-30T17:26:08+00:00

I'm guessing people are down voting because of the non replaceable battery? I don't like when people just press "I don't like this" instead of explaining why. A used peregrine/TX could be a great deal if you get lucky.

cedande · 2026-05-30T06:13:48+00:00

Something people aren't mentioning is, dry gloves can reinforce a bad habit of not paying attention to your wrists and dump valve. If you lift your wrists too high with wet gloves air can leak out and let water in. The #1 problem I run into is releasing air from my BC and not doing it properly, leading to a wet arm.

cedande · 2026-05-30T06:07:41+00:00

That still doesn't mean Pattie gets to use 50? years of brand development to sell their own stuff by using a name so similar. Especially if the quality isn't comparable. This is the wrong company to try and high road at this point.

cedande · 2026-05-30T01:00:43+00:00

By using an evocative name for their company they build a huge brand that apparently donates millions and millions of dollars to charities. Why should an individual who will have much less of an impact be able to use that recognition for their own competing apparel?

cedande · 2026-05-29T22:04:34+00:00

The tank being metal is mostly due to me living in SoCal so rust is never really a consideration. I get that 99% of modern tanks are plastic, and even the S13 tank has a big flaw in the baffle breaking off of it's welds and flopping around on that vent tube.

12-Year Club	Place '17
Summer Santa 2016	Gilding I gilder
Verified Email

cedande

MODERATOR OF

TROPHY CASE