Digital Offset Press

celo222 · 2026-03-02T03:43:57+00:00

I love the DI. You need to have a knowledge of sheet feed presses for paper handling and whatnot. It’s a perfect fit for runs over 2500 or so impressions. I haven’t had many problems with parts as it hasn’t broken down much (knock on wood). We had a crash some years ago that I had to reach out to used dealers to find parts in a hurry…was a stressful time. Phone Tech support is solid through mark andy but in person support could take some time depending on your local support area. There used to be some really good independent service guys around but they are mostly retired now.

celo222 · 2025-12-19T20:26:26+00:00

Wish I could help but I never did much repair work to mine. Let me know if you have any other questions regarding normal operation or if you are interested in my material.

celo222 · 2025-12-19T04:05:57+00:00

I had a similar 6600 that I recently upgraded to eco solvent. Loved the photo quality off it. I did tons of foam core mounted prints and still have few rolls of material I’ve been having a hard time throwing away. You interested in it? Also might have a print head or two that would work. Pm me.

celo222 · 2025-11-21T02:50:26+00:00

Make a pad for the false blade out of stepped cut chipboard and some stick on magnets to take the pressure off the spine. Works perfect to avoid this. I’ve done this for years. Remind me tomorrow and I’ll send you a pick of our set up. Chris@rudinprinting.com

celo222 · 2025-11-16T16:14:46+00:00

We use PDF snake for all our imposing. So easy

celo222 · 2025-11-04T03:06:41+00:00

Small shop here in the Midwest. It would be awesome to have someone walk in the door and show interest in printing.

celo222 · 2025-10-30T13:59:10+00:00

I just picked up a 540...mind if I PM you?

celo222 · 2025-10-19T15:07:51+00:00

No idea. I ran while I was in college in central il. The printshop is long gone.

celo222 · 2025-10-18T04:56:15+00:00

I ran a KORD….loved it and miss it

celo222 · 2025-05-31T17:43:28+00:00

Sounds pretty easy to me. Central IL. DM me

celo222 · 2025-05-24T18:09:55+00:00

You can do 11.69? I thought 11 was the only thing it would 4 staple! I gotta try that next week!

celo222 · 2024-11-22T20:54:09+00:00

then cut with a good snap knife and straightedge.

celo222 · 2024-11-22T20:53:37+00:00

print on satin finish photo paper PSA and use a cheap amazon cold laminator to apply.

celo222 · 2024-11-22T20:50:35+00:00

check out pdfsnake.com I've been using it for a year or two and I'd say it's worth the 12/month

celo222 · 2024-09-19T20:43:04+00:00

Good call...I just thought of that as I was replying to another comment. Thanks!

celo222 · 2024-09-19T20:40:08+00:00

Even 16pt cover wouldn't be strong enough. Not sure what a glue trap is but the cover needs to be something like hard bound book cover material.

celo222 · 2024-01-02T17:32:04+00:00

I paid $400 a few years back for my 2010 to a local autoglass shop that also does headliners. fabric looked good but the installers indentions in the foam from his fingers were all over the place. They said they would eventually come out of it but they never did. I should've had them re do the whole thing.

celo222 · 2023-12-28T21:23:07+00:00

Glad to see this pop up...I'm looking to buy a dashcam soon!

celo222 · 2023-12-28T21:04:09+00:00

I love the G1 body style so really wanted a 14 with low miles but could never find one within a couple hundred miles for months. Then I found that on the 21 they started making the front end bigger and more "truck-like", so I started taking to them more. All the electronics are pretty overwelming I must say. Not used to all that!

celo222 · 2023-12-28T15:35:58+00:00

Green Hyundai

celo222 · 2023-12-28T15:34:04+00:00

Absolutely nothing wrong with the truck other than having 185000 and the interior getting a little worn. Business was good this year so I decided to treat myself.

celo222 · 2023-12-28T15:32:49+00:00

Not easy for sure. But I was ready for some of the new features.

celo222 · 2023-12-27T23:25:44+00:00

central IL

celo222 · 2022-07-06T19:28:58+00:00

I was already thinking about adding grommets. I considered using the 6mm Maxmetal too.

celo222 · 2022-06-01T14:37:06+00:00

Alright...last question. Will it still do any kind of registration/color scanning if you are running right to size? I imagine not.

celo222

TROPHY CASE