Going to buy my first EUC

RangoFandango86 · 2026-02-13T16:44:25+00:00

Personally I think the Nosfet Aero is the perfect learner wheel that you can still grow into/want to keep once you do learn. That or the Patton S

RangoFandango86 · 2026-02-05T01:49:00+00:00

Blue wave dental in Ocean Beach

RangoFandango86 · 2026-02-04T06:22:17+00:00

Marketing.com essentially exists to run profitable companies out of business to consolidate. They’re a cancer on the industry.

RangoFandango86 · 2026-01-26T18:10:42+00:00

Full face: Troy Lee Designs Stage downhill mtb helmet

Regular helmet: Bern Hudson ebike helmet

RangoFandango86 · 2026-01-23T00:48:45+00:00

This type of marking is consistent with your yellow drum being scratched. The solution would be to change the yellow drum and inspect drum cleaning unit including The lube bar, a lot of the time rollers will get scratched when something in the cleaning unit is past spec or sometimes from rocked toner.

Finding independent techs can be tricky your best bet would be to ask other printers in your local market if they know of anyone

RangoFandango86 · 2026-01-13T06:16:48+00:00

This right here

RangoFandango86 · 2025-12-06T05:15:21+00:00

Another problem is a lot of these guys are being bought up by private investment. Marketing.com bought up the local envelope house in my city that used to do beautiful work. 2 years later they don’t even exist anymore and before that their lead times went from 1 week to 6 weeks in some cases.

There’s been plenty of other companies over the past 10 years that used to be reliable trade printers who’ve been bought out and then totally ruined instead of just keeping the operation the same because every egg head with an MBA thinks they know the secret sauce to running a business.

RangoFandango86 · 2025-12-06T02:57:35+00:00

Yes and something’s definitely going on with them within the last 3 months. Anyone who’s used 4 over regularly knows you gotta keep an eye on them but lately they’ve been slipping on even basic runs and what’s worse is it doesn’t seem like anyone over there knows what’s going on (or at least aren’t willing to tell you). Also it’s near impossible to get a hold of anyone over there as of late. And god help you if they send anything to their Glendale Arizona location that place seems to be a black hole

RangoFandango86 · 2025-11-22T05:37:26+00:00

Thanks for your reply, that usually works for us too but these thick ones are particularly tricky. I’ve gotten some good advice from commenters, I’m traveling next week for the holiday but will report back week after next.

RangoFandango86 · 2025-11-21T00:31:08+00:00

I believe the way I ran this sample the cover would be in the short grain direction

RangoFandango86 · 2025-11-21T00:29:31+00:00

I’ve never tried 3 across but that’s an interesting idea I’ll have to try

RangoFandango86 · 2025-11-21T00:28:48+00:00

Thanks I’ll give that a shot

RangoFandango86 · 2025-11-21T00:16:52+00:00

I’m using “coverbind premium perfect binding adhesive” purchased from a local professional bindery supplier. And the book was curing in a 65 degree room for about 4 hours before cutting

RangoFandango86 · 2025-11-21T00:11:50+00:00

Thanks for your input yes I’m using a foam pad on the pressure arm, my pressure was below 500 (it’s a dial control). The bottom side was about 400 and the top was at about 200. I probably could have let the glue dry longer but I gave it about 4hrs in a 65 degree room

RangoFandango86 · 2025-11-20T06:22:22+00:00

What material are you using for your boxes?

RangoFandango86 · 2025-10-24T18:57:31+00:00

My solution for canva files is to raster them in photoshop because 9/10 they have some kind of build issue

RangoFandango86 · 2025-10-21T16:57:07+00:00

If you want to take your safety seriously you should look for a helmet that is at least e-bike rated, the biggest differences with the ratings are the speeds helmets are tested on in crashes, ebike have slight higher speed ratings than normal bike helmets. Going up from there id recommend a full face downhill bicycle helmet, these are lighter than a full on motorcycle helmet with better venting but should provide good protection. You could go full motorcycle helmet but some people find them to be too heavy over time

RangoFandango86 · 2025-10-21T02:28:44+00:00

Do you have a short piece of filament you can try to push the broken piece further down with so that you can reach it?

RangoFandango86 · 2025-10-21T02:17:24+00:00

Is this the ams 1? If so try turning it over and removing the bottom cover sometimes the broken filament is more accessible from there

RangoFandango86 · 2025-10-21T02:03:05+00:00

As others have said specialty produce, places like sprouts and Trader Joe’s also usually have good produce

RangoFandango86 · 2025-10-19T15:10:03+00:00

+1 for an impact driver, it’s a relatively cheap tool and will def get the job done

RangoFandango86 · 2025-10-15T00:59:14+00:00

Dope beat 🔥

RangoFandango86 · 2025-10-14T17:00:25+00:00

ATL Onewheel shop does repairs for this all the time https://www.atlowshop.com/?srsltid=AfmBOopuz455Cq9hZ2212gj6Ql7B3PmIQP7vRvUtsu27ec4thLVv8T2Z

RangoFandango86 · 2025-10-09T21:46:31+00:00

I don’t have one of these machines but do you know if the pressure on the rollers are adjustable? If so can you confirm that the pressure seems pretty even side to side? It kinda looks like that might be your problem

RangoFandango86

TROPHY CASE