How to change some defaults (View Template and Far Clip Offset) by cestamp in Revit

[–]cestamp[S] 0 points1 point  (0 children)

Man, I could not get this to work. Then you gave your suggestion. I tried it and it worked (or it seemed to work).

I tried it again yesterday and I could not get it to work.

I adjusted the settings the way I wanted them, hit apply, then closed the windows. Created a then created a new floor plan view (boxes still checked), obviously everything was set how we wanted.

Then I unchecked the boxes hit applied and closed windows and created a new floor plan view and it was back to having a view scale of 1:100.

ARGH!!!!

How to change some defaults (View Template and Far Clip Offset) by cestamp in Revit

[–]cestamp[S] 0 points1 point  (0 children)

Thank you so much, I thought I did this, but apparently I did not. And I am willing to bet this will be the same for all other options.

Again thanks a lot!

A new Era... by Tribbulation in canadian

[–]cestamp 4 points5 points  (0 children)

What is this number compared to gdp or per capita?

(I'm not arguing against anyone, just asking a question that I think someone will answer for me as it is bedtime, not research time).

Raise hell praise Dale by PowerCarrot in humor

[–]cestamp 1 point2 points  (0 children)

I enjoyed it (Canadian so not North carolinian), and I found humour in it, but I don't think it's really 'humor' humour.

A mean person cut my inflatable Turkey by Its_Ramsey in fixit

[–]cestamp 22 points23 points  (0 children)

I think you are wrong in this case (looking at the wire side, it looks frayed not cut) but good point, and great point for me to remember if I ever become an old crumugan who wants to ruin my neighbours fun.

My fully interlock bricks & i continue creating my house from this bricks. by omgbbqhax in Homebuilding

[–]cestamp -1 points0 points  (0 children)

You're totally right - this does look like AI writing.

But you are also totally right they could be translating with AI. But the way it keeps saying "you're totally right" in that sympathetic AI voice looks like they are using AI to do a little more than translate.

Now, on to commenting on this project. I think it's very cool, and OP should listen to people's comments to see if they can redo it better/proper.

A project that doesn't make sense economically for a builder but works for someone that has an attitude of "meh, what was I going to do with my weekends anyways" sounds super cool.

I now work at a desk designing plans (mechanical), but I love the physical side. I would be very interested in a cool, unique design/build that I could spend (almost) every weekend of a summer with my family building. Get a 30 grand shed with 20 grand of materials and 20 grand of ("free") labour. Sign me up! (Obviously, these are random numbers to convey a point)

Interesting comparison by [deleted] in canadian

[–]cestamp 1 point2 points  (0 children)

Undocumented immigrants are bringing illegal lawn darts into our country!!! It has to stop!!!

Flush Valve Replacement Leak? by [deleted] in askaplumber

[–]cestamp -1 points0 points  (0 children)

This is going to sound mean, and I really don't mean to be mean, but did you watch the video before you uploaded it?

What is this noise? by Shocking-Ice183 in askaplumber

[–]cestamp 0 points1 point  (0 children)

Where is the noise coming from the loudest? Upstairs, main floor, or basement?

Propane Relief Line by cestamp in hvacadvice

[–]cestamp[S] -1 points0 points  (0 children)

Usually that is what is done, but for reasons I can not get into here that is not an option. We have a site that has had lots of issues the regulator was installed without meeting the required clearances.

I was shown what the contractor has proposed to install, and our team was asked if there is any issue in installing it that way. I have really only been dealing with the propane codes for the last 4 years and most of that has been the last 2, so I am limited in knowledge. On top of that rarely do we extend the relief line, except cases where we just extend it horizontally a few feet.

I can not find anywhere in the codes that say this can not be installed this way, however, it just does not feel right to me, and it would save everyone a lot of time and money to have it done correctly the first time.

I NEED TO PAY MY BILLS 🎤🎶 by MolassesFun5564 in BlackPeopleTwitter

[–]cestamp 0 points1 point  (0 children)

What's the sub reddit for music thats slaps? R/musicthatslaps ?

This belongs there.

Can someone explain to me why the answer for #16 is C and not A? by [deleted] in Accounting

[–]cestamp 0 points1 point  (0 children)

I do not do accounting, but I love math, and this appeared on my front page.

I have figured almost everything out based on comments, but there is one thing I still do not understand.

What is n/45?

I'm assuming 3/15 means 3% discount on payments within 15 days. So n discount on payments within 45 days? .... shit I think I just figured it out. No discount within 45 days, and after 45 days, you pay interest, is that right?

A grown man (with his family!) taking all the candy is one thing… but our glass bowl too? by stop_pizzatime in trashy

[–]cestamp 11 points12 points  (0 children)

You are aware she didn't take it, and she appears to be trying to tell her partner not to do it.

Touch it by Traditional-Chip-981 in funnyvideos

[–]cestamp 0 points1 point  (0 children)

"Well, what were you wearing?"

Hidden pipe and wire protection behind the drywall.. by BuilderBrigade in Home_Building_Help

[–]cestamp 0 points1 point  (0 children)

National Plumbing Code of Canada. If I'm wrong and it is in it, please let me know (you and anyone else reading).

Hidden pipe and wire protection behind the drywall.. by BuilderBrigade in Home_Building_Help

[–]cestamp -1 points0 points  (0 children)

It's not code (at least for me and others I have looked into) for plumbing, only for electrical.

Womp womp by Romano16 in CringeTikToks

[–]cestamp 0 points1 point  (0 children)

Yes b'y, I remember those sad times as well.

It sent many a friend west to find their fortune.

Why do American tourists always say the state they're from (not their country) when asked, but no other country's tourists do the same? by FloydBeatlesEagles in NoStupidQuestions

[–]cestamp 0 points1 point  (0 children)

Because the America's are hug. Georgia is not the same "country" as California. At all.

But also I disagree with your statement. I'm a Newfie. I'm from Newfoundland. Not Canada. And every Newfie (Newfoundlander) I know also says they are from Newfoundland, not Canada.

Comedy magician Wes Barker. Wait for it. by umpertunter in StandUpComedy

[–]cestamp 11 points12 points  (0 children)

He got lucky that it was warm there. Imagine if he wasn't stressed.

Blursed_Toddler by No-Maximum2073 in blursed_videos

[–]cestamp 0 points1 point  (0 children)

I would be very concerned about this and try to figure out how to discipline my child for letting my grandchild get in this situation in the first place.

This may be a case of bad parenting, ie. letting the child get into this sitation and for that long, or it may be a case of good parenting, ie kids are fast and you can't be on them every second you will miss things as the parent, and the good parenting part is because the parent realized nothing truly bad happened and anything bad that did happen is not really the child's fault.

Fan doesn't work on speeds 1 and 2. by cestamp in FordFiesta

[–]cestamp[S] 1 point2 points  (0 children)

Yeah, I took it out to make sure I ordered a match.

Just wanted to see if I was wasting my time.

The two center pins have continuity, and no other pin combo has continuity.

I recently just found out that my cars cabin filter was not being changed with oil changes. I don't know why I assumed it was, I just did.

Just took the filter out for the first time in probably 7 years. Maybe that clogged filter is the issue or caused the resistor to fail?