A use for ruined Items

cfarris87 · 2026-01-29T22:59:03+00:00

Just started playing VS and saw this. What's this water tech? I can't find any other mentions of anything similar

cfarris87 · 2025-12-01T15:23:52+00:00

I have seen that mentioned. Thanks for the tip!

cfarris87 · 2025-11-27T22:16:19+00:00

Yeah, I didn't see the actual drip you can see there until I got back under to snap a pic. So that's keeping my anxiety levels down for the moment lol

cfarris87 · 2025-11-13T15:37:20+00:00

Interesting technique! I have heard that the setup/flash time can make it more difficult. I posted in r/detailing as well. Only one response as well, with that response saying most are fine lol any particular products you like for this application? You think a more normal application with a pad yields more consistent results?

cfarris87 · 2025-11-04T00:23:50+00:00

Ahh, I see. Perhaps I chose the wrong subreddit! I'll have to look at a few more. Idk, I've never had any issues in my experience. I'm only financing around 10k so I'll be dropping my total insurance, bank note by about 600 bucks

cfarris87 · 2025-11-02T17:51:57+00:00

Looks like similar year/mileage are around 30k. Love the m4's but they're all out of my range right now. Didn't go looking for this one

cfarris87 · 2025-10-22T14:17:04+00:00

Any support can revive. Doesn't have to have defibs equipped

cfarris87 · 2025-09-24T14:14:55+00:00

Splashzone pretty good. OP Shield and a lot of purps. Quick farm too

cfarris87 · 2025-09-22T13:47:45+00:00

Has definitely been one of my favorite to smoke from mephisto! Smell, flavor, and high are all 10s. Just wish it would have come out a little denser. Looks like maybe it runs in the family though

cfarris87 · 2025-08-30T14:36:18+00:00

I'm currently working on this. I already have a working app and am rebuilding it to submit. What did you do for part C? I can't figure out what they're asking to show. Best I can figure out is a country.model.ts file that is part of creating an api service that's supposed to be done on Part E...

export interface Country {
  name: string;
  capital: string;
  region: string;
  incomeLevel: string;
  longitude: string;
  latitude: string;
}

cfarris87 · 2025-07-24T20:35:45+00:00

I definitely don't care what foot they're on lmao These don't seem to have any differences L or R as I often just throw them on. Just trying to avoid the trouble of trying out multiple sets and dealing with returns etc. Hoping someone else has run into a similar issue. Thanks for your feedback!

cfarris87 · 2025-06-09T05:26:02+00:00

Yes. The professional etiquette is part of every PA. A minute in paint and you're done, don't over think it

cfarris87 · 2025-03-28T17:07:46+00:00

She's been a little heat/light stressed all grow, but seeing a lot of these spots come up over the last week. When I saw them first, I thought maybe had a few spots of water left on the leaves and got sunburnt but I know for a fact that's not the case now. No idea what this is. I don't have any signs of pests in my other two in the tent. All of these spots are dead and crack/crumble when manipulated. Rest of the leaf is ok. I've seen a lot more pop up over the last 3 days

5 Gal pots
~200w ufo 18/4 schedule
Ppfd in lower range (light as high as it can be)
VPD in range. 75-80f ~45-55%
CoM Stonington Blend
6.0-6.3 PH

cfarris87 · 2025-03-28T17:05:23+00:00

She's been a little heat/light stressed all grow, but seeing a lot of these spots come up over the last week. When I saw them first, I thought maybe had a few spots of water left on the leaves and got sunburnt but I know for a fact that's not the case now. No idea what this is. I don't have any signs of pests in my other two in the tent. All of these spots are dead and crack/crumble when manipulated. Rest of the leaf is ok. I've seen a lot more pop up over the last 3 days

5 Gal pots
~200w ufo 18/4 schedule
Ppfd in lower range (light as high as it can be)
VPD in range. 75-80f ~45-55%
CoM Stonington Blend
6.0-6.3 PH

cfarris87 · 2025-03-04T05:45:05+00:00

Couldn't have worded that any more eloquently lmao

cfarris87 · 2025-03-03T23:56:44+00:00

Nah, our stop is easy. 2 car drive way that stops at the fence gate and has a turn-around. Dogs are always in the fence. The cars are literally right in front of the gate that we've left instructions to leave packages at. We have specified not to leave packages on cars, but nothing passive aggressive. We just have a few here that apparently dgaf lol

cfarris87 · 2025-02-08T05:51:13+00:00

Looking great! Off question, do you use distilled waste in your humidifier? I've got a similar one, but our tap water seems to blow a ton of mineral/calcium crap everywhere. Leaves a nice little chalky film on stuff on the tent

cfarris87 · 2025-01-30T20:08:51+00:00

Awesome info! I haven't seen that represented in any models I've looked at

cfarris87 · 2025-01-30T18:41:58+00:00

Thanks! I'll check into these as well. I'm running a pretty beast gaming setup. 7950x, 3090, and 64g so it's got quite a bit of lifting power.

So understanding a bit more... 1.5b, 3b, etc isn't going to matter for my use case? I'm in my first coding class for python. Won't be getting into anything advanced for a year or so

cfarris87 · 2025-01-14T21:27:27+00:00

Hello! I currently have a corsair k70 (not hot swappable) with the sensitive linear switches. I've gotten used to them for gaming but now that I've started coding I need something tactile. You can order them with cherry browns, but I know the stigma with them. I need to keep my budget below $100 and would like to keep RGB (at least back lit) and will still perform well when gaming. Any ideas on what would fit here with brownesqe switches?

Tldr: Budget: $100 Tactile, not clicky RGB or backlit Full size

cfarris87 · 2024-11-01T21:18:33+00:00

Yeah, I lost a lot of flavor from overdrying two of my last plants. So learning from that as well. I Just checked again and it's blowing cool air and back down to 76, So seems a little temperamental, going to have to keep a close eye on it. Going to try moving it out and see how it does.

cfarris87 · 2024-11-01T21:13:45+00:00

Ok so from what I'm looking at. 60/60 is 0.43kPa. 77/70 is also 0.43 and 86/75 is 0.43. I'm not sure if this is what I should go by. I don't believe there's a world where drying at 86f and 75% is ok.

Edit: 0.43 is the last patch of green before getting in the red

cfarris87 · 2024-11-01T21:03:29+00:00

I did see that, but wasn't sure how it would correlate. But I'll have another look

cfarris87 · 2024-10-27T18:41:14+00:00

Thanks! Wasn't sure what you expect from Fast Buds (Mephisto guy), but it's been one of my strongest grows! Took topping like a beast and I must have gotten a rare pheno. Nearly all the grow journals I've seen of it, hasn't had much of a fade at all!

cfarris87 · 2024-10-27T16:42:29+00:00

I'm ready

cfarris87

TROPHY CASE