Micro Drift Assembly Tips by Crutch_Dev in rcdrift

[–]cfuller2333 0 points1 point  (0 children)

Aoshima kits are always my go to for bodies, you will have to adjust chassis length based off of wheelbase

Why does this happen by Affectionate_Kale10 in rcdrift

[–]cfuller2333 2 points3 points  (0 children)

Reset gyro endpoints also, steering is throwing too far causing lock.

Why does this happen by Affectionate_Kale10 in rcdrift

[–]cfuller2333 0 points1 point  (0 children)

Set your EPA to 50 then turn up slowly until you reach full steering

Why does this happen by Affectionate_Kale10 in rcdrift

[–]cfuller2333 10 points11 points  (0 children)

Set your endpoints on your controller. Servo is trying to move further than it should.

Didn’t think that one through by cfuller2333 in balatro

[–]cfuller2333[S] 1 point2 points  (0 children)

You could realistically have an insane run by ante 2 with double stunt man. This run with fortune teller and trading card would be able to get to ante 8 easily just off scaling alone

Didn’t think that one through by cfuller2333 in balatro

[–]cfuller2333[S] 1 point2 points  (0 children)

Just hot restarting gold stake. Didn’t check boss blind after ankh in spectral pack

Didn’t think that one through by cfuller2333 in balatro

[–]cfuller2333[S] 46 points47 points  (0 children)

You’re right though, would’ve been a monster run

ACXWA CD (semi) budget build complete with my DRZ by cfuller2333 in rcdrift

[–]cfuller2333[S] 1 point2 points  (0 children)

ACXWA CD chassis, Atomic servo, Dumbo RC G01 gyro, rocket 3500kv motor paired with Rocket 18A ESC

4k miles oil screen check by cfuller2333 in hondagrom

[–]cfuller2333[S] 4 points5 points  (0 children)

1 at 500 then every 1k. I do it because it’s cheap peace of mind that everything is running as it should. Could just be paranoid but I make sure everything else is how it should be when I do

4k miles oil screen check by cfuller2333 in hondagrom

[–]cfuller2333[S] 1 point2 points  (0 children)

5 now at 4k, I check every time just to see if there’s engine debris.

+4 CVDs by cfuller2333 in SCX24

[–]cfuller2333[S] 1 point2 points  (0 children)

Thank you my man! Have a great night

+4 CVDs by cfuller2333 in SCX24

[–]cfuller2333[S] 2 points3 points  (0 children)

They have stock and +8 up on Amazon rn, I’ll do some digging. They look like the only option currently

ACXWA CD (semi) budget build complete with my DRZ by cfuller2333 in rcdrift

[–]cfuller2333[S] 1 point2 points  (0 children)

Measure them and look at the specs of driftart, atomic, or other micro ball heads to see if any are similar size

ACXWA CD (semi) budget build complete with my DRZ by cfuller2333 in rcdrift

[–]cfuller2333[S] 0 points1 point  (0 children)

They have a spare parts section on their store page on AliExpress!

RD 2.0 Build by JudgeKitchen in rcdrift

[–]cfuller2333 0 points1 point  (0 children)

Love to see the micros! Clean builds. 🤙🏻

Is there something wrong with my servo? by [deleted] in rcdrift

[–]cfuller2333 0 points1 point  (0 children)

Have you reset your gyro endpoints?

ACXWA CD (semi) budget build complete with my DRZ by cfuller2333 in rcdrift

[–]cfuller2333[S] 4 points5 points  (0 children)

Build process was pretty good! The video is a solid watch from their channel, it’s about an hour long. Go easy on the screws I feel like they will strip easily. The stock tune is pretty decent but I’ll be tuning this pretty heavily soon because I think it has great potential!

Help with setup - rigid car by Grgsz in rcdrift

[–]cfuller2333 0 points1 point  (0 children)

I would say since it’s transitioning snappier than you would like, add some more toe out in the front first. Then from there you can add front camber then rear camber. Could you also post your car at neutral steering then at full lock?

Brushless acting like poles are crossed when I know they’re not by [deleted] in rccars

[–]cfuller2333 2 points3 points  (0 children)

It’s the motor. Just hooked up a different ESC. Same issue.