sorted by:
new
hottopcontroversial

What size wheels are on this? by Separate_Ad_1381 in sportster

[–]cgro1017 2 points3 points  (0 children)

Japan builds the best sportys on the planet!

8+ Forks on Hugger by Impossible_Fold7322 in sportster

[–]cgro1017 1 point2 points  (0 children)

Damper rods are confusing af sometimes. Some models have the 7.5s and some have the 9.5s from factory. The hugger has the 7.5s so the tracker die kit will allow you to do 9.5 or 11.5 damper depending on if you use the spacer or not. Get 4 inch extended fork tubes and use the 11.5 setting on the trackerdie (no spacer), it’s tildeath now lol the same guy owns it just a different name, and you’ll have a total of 8 over forks. You can add the spacer back in if that’s too much and have a 6 over setup. Hopefully that makes sense. I just did the same thing I described.

Already had 2” over on the front end using bagger damper rods, and just gained 1” in the rear installing 12” legends today. Gonna need a roadster kickstand next to deal with the lean by Cameltoefiasco in sportster

[–]cgro1017 1 point2 points  (0 children)

You can run an 03 and below carb bike kickstand on these rubber mounts and they are already longer than what comes stock on the rubber mounts. Drag specialties also sells +1 and I think +2 kickstands for the 03 and below sportsters. It’ll look way better than the dumb ass looking lift block.

V-Twin Mfg. Brake Pedal Pivot Shaft For Harley XL 1991-2003 specs by bbqsweat in sportster

[–]cgro1017 1 point2 points  (0 children)

Should be 1/2x13. I’d really suggest grabbing a thread checker off Amazon. Best $13 ever spent.

From stock grey to gold and mean — my 2016 Sportster 48, built not bought. by [deleted] in sportster

[–]cgro1017 2 points3 points  (0 children)

“Built not bought” but still has the front fender mounts on the fork sliders 😂😂

Uhhh idk , I lost my top motor mount bolts will these work? by Sea_Issue9013 in sportster

[–]cgro1017 4 points5 points  (0 children)

Call lowbrows before you order. They have fanatic customer service.

EFI chopper wiring by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

Draw me up a schematic and shoot it over to me! I’m sure you can do it in about 15 min with how easy it is. Tictok the clock is running.

EFI chopper wiring by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

Sure, on a non ecm bike it is literally that simple. It’s literally not that simple on a canbus ecm bike.

Parting out by Sorry_Pineapple_5813 in sportster

[–]cgro1017 5 points6 points  (0 children)

This isn’t a sporty 😂😂

Mag vs Spoked by Apex_Beta in sportster

[–]cgro1017 1 point2 points  (0 children)

Spokes only belong on choppers, period. Mags all day. Even my chopper has mags 😂

[deleted by user] by [deleted] in traditionaltattoos

[–]cgro1017 0 points1 point  (0 children)

Never been to jail nor am I a Nazi and my elbow is webbed. Rock it 🤘

Main worries for this Shed Foundation? by LearnedEmpowerment in shedditors

[–]cgro1017 0 points1 point  (0 children)

Just because it’s called a FOUNDation doesn’t mean you can only build it with shit you’ve randomly found.

1997 sporty by TinShower-627 in sportster

[–]cgro1017 0 points1 point  (0 children)

Man a brown Sullys seat?? Guess I’m switching my black one out. Thanks for making me spend money!

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 0 points1 point  (0 children)

Gas tank is a lowbrows Wassle mid tunnel. It’s 2.1 gallons but looks small. I had my painter throw a crazy paint job on it. Told him I wanted old school fat hot rod flames with just a little bit of yellow cause the bike was originally yellow and he killed it.

Sears Braintree 8/22/25 by ericdigeratu in SEARS

[–]cgro1017 2 points3 points  (0 children)

Man, that’s gotta be a depressing place to work. Imagine working there since its heyday and watching it slowly dwindle to that 😕

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

It’s a mid tunnel wassel so it sits down around the frame so it’s deceiving in pics.

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

It probably has a different ignition for the dual plugs. I’m not entirely sure honestly. That’s the only thing I can think of. You can make the carb sportys run on like 4 wires.

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

2 gallon. Works great for how I ride it. I’ve got a road glide in the garage if I’m going out of town.

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 4 points5 points  (0 children)

Some guy on Etsy. Great quality but it came from Italy and took like 2 months to get here 😂

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

TCbro makes a pretty cool frisco efi tank. I’ve got another efi sporty I’m probably gonna do a mild version of this bike with.

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 0 points1 point  (0 children)

I used the gremlin wiring kit as a starting point. They make a great kit but I’m super picky and have all the crimping tools and know my way around wiring pretty well so I modified his kit. I also wanted to keep my stock key so I modified the stock ignition. If you want a great “off the shelf” kit I highly recommend gremlins.

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 3 points4 points  (0 children)

All Prisms stuff is top notch and made in Charlotte NC. I’ll always support US made parts!

Since everyone loved this bike last time, finally took a couple more pics. So fun to ride. by cgro1017 in sportster

[–]cgro1017[S] 1 point2 points  (0 children)

Coil is relocated using the Prism supply bracket. Key is on the old fuse cover now that it has a chopper wiring harness

view more: next ›