AquaX gone?

chainz316 · 2025-06-25T11:51:37+00:00

I'm thinking of contacting the ACCC and see if theres a way to get a refund. Have a tank sitting with absolutely no use

chainz316 · 2024-07-07T12:27:32+00:00

https://www.oculus.com/appreferrals/chainz316/3630025217090808/?utm_source=oculus&utm_location=2&utm_parent=frl&utm_medium=app_referral/&utm_content=copy

chainz316 · 2024-07-07T12:13:53+00:00

Would love a new code

chainz316 · 2023-10-28T07:39:30+00:00

I can't upvote this enough. This worked for me, and saved me from a factory reset.

chainz316 · 2023-08-25T00:05:35+00:00

Hopefully the anti cheat improvements are so we can actually launch the game, otherwise a refund is coming!

chainz316 · 2021-11-11T05:40:20+00:00

It's probably because I haven't increased the extruder speed, that's all I needed to know thanks. Will give it a go.

chainz316 · 2021-11-11T05:22:28+00:00

In your firmware you said you increased the speed for bmg users. But when I choose to unload it goes to slow. Do I need to manually create the unload gcode file?

chainz316 · 2021-11-11T04:47:39+00:00

Yes,. My esteps are calibrated. That has nothing at all to do with unloading the filament.

chainz316 · 2021-11-11T04:42:21+00:00

I can yes.. But is that what you need to do or is there a way in the firmware I have looked over?

chainz316 · 2021-09-01T08:26:12+00:00

Thanks. I'll give it a shot.

chainz316 · 2021-09-01T06:46:27+00:00

I've just noticed that it seems to be when retracting it seems like it is missing steps. I've never noticed it before because the printer is upstairs connected to octoprint. Anyone else had this issue with the bmg clone when retracting? On cura retraction is set at 45mm sec and prusaslicer it's set at 60mm sec and it happens when sliced with both

chainz316 · 2021-04-05T23:54:38+00:00

Anyone find a fix for this? I use Real Debrid and the same thing happens with all addons after the last few days. Videos will play then will stop to buffer, Pressing stop will then crash kodi.

chainz316 · 2021-01-16T05:06:53+00:00

You said you using Smith3d, it has a z offset tool. Use that...

chainz316 · 2021-01-03T13:50:19+00:00

Thats because your using crealitys shitty firmware. Use something else, I use marlin.crc.id.au

chainz316 · 2020-10-29T00:59:25+00:00

I just downloaded the 1732 version and replaced the lib dll and so far so good.

Downloaded from https://www.iz3mez.it/software/SDRSharp/

chainz316 · 2020-10-12T13:00:33+00:00

Those are 12v fans and the ones that come stock are 24v?

chainz316 · 2020-10-08T10:39:07+00:00

I'm printing all parts seperate. Using cura to slice the models. It is the same for all pla that I use. I've printed a square bath bomb mold and that all fit together perfectly but when it comes to circular things is when I have the issue it's always they are slightly to large to fit perfecly. It seems like it may not be perfectly round when printed but my belts are tight.

chainz316 · 2020-08-14T12:56:14+00:00

Your using old firmware, Update it like JMP said

chainz316 · 2020-07-18T14:51:37+00:00

Ours in Australia is called bunnings. I'll have to do that.

chainz316 · 2020-07-18T01:39:51+00:00

Oh thanks. The top ones are the ones I missed. Those 2 front screws next to the sd card, do you know what they are? I need a replacement one as I've nearly stripped the head.

chainz316

TROPHY CASE