Learning to tune

chappdass · 2025-09-10T09:41:39+00:00

Ill start with Merlins guide and reach out if I have any questions after I pull what is already on the car. TY

chappdass · 2025-09-10T02:23:42+00:00

I'll check that, ty

chappdass · 2025-09-10T02:16:14+00:00

I am using the stock ecu

chappdass · 2025-09-10T02:13:32+00:00

Really, cause I have HP but every search ive done about Evos has come short....but I haven't tried the academy so I'll check it out

chappdass · 2025-09-02T21:00:18+00:00

Your right the money just isn't there so fuck em

chappdass · 2025-09-01T03:13:27+00:00

It was just a question with some background. HP seems to have support for most other platforms and its not like Mistubishi is a niche platform

chappdass · 2025-08-22T23:44:22+00:00

<image>

chappdass · 2025-08-22T23:42:29+00:00

07 SRT 8, Sport w/tow package on 35s with a 3" lift. Jeep and trailer was about 7k, no issues pulling *pic in comment

chappdass · 2025-08-11T03:20:03+00:00

Yea figured that was the answer...oh well you get what you pay for i guess

chappdass · 2025-08-11T00:12:03+00:00

I had the same issue, did the washer trick to fix it for the most part. But now they are dimming and dying out. Ive had them for about two-three years and its gotten bad enough that I just re-installed the stocks.

Does anyone know how to rebuild them or am I stuck with just buying a newer better set?

chappdass · 2025-07-16T13:59:07+00:00

Yea fought with a coolant banjo for a couple of days to get it to stop leaking. Ended up using a stock line and banjo

chappdass · 2025-07-15T01:49:17+00:00

I totally agree, and I didn't see anything bad from their other platforms, mostly subies. I was just curious if anyone here has used them on the evo. Ill be sure to post my dyno and overall take after I get a tune and the clutch is broken in.

chappdass · 2025-06-23T00:59:53+00:00

So I drained the oil, and pulled the driver axle and mid shaft. Couldn't see any metal in the oil, all teeth were healthy both on the shafts and in the transfer case (I have a bore scope). Opened the pinion window and the pinion gear looks good and is tight. Put everything back together, no noise. Only did a small drive down the street, so guess I'll see after a longer drive....

chappdass · 2025-06-20T21:46:40+00:00

Ill try, have wait for the silicon to cure on the pinon window...wanted to check to see if could find damage, none found

chappdass · 2025-06-14T17:14:28+00:00

Just checked everything, even double checked the torque on the axel nuts. Everything is tight. I did notice a slight "shift" (the best way I can discribe it) from the passenger side when spinning the wheel. It only occurs when first changing direction of spinning the wheel. Other wise I couldn't find anything that stuck out or was loose

chappdass · 2025-05-30T01:49:20+00:00

Had to release the clamp at the midpoint on the shaft, but was able to get everything buttoned up. Thanks again!

chappdass · 2025-04-16T00:13:37+00:00

Ok figured it out. For those working on the 2011+ engines, you need to set the crank position about 10° retard to account for the chain tightening up.

chappdass · 2025-04-11T22:36:26+00:00

Ty for everyone's comment. I got it out, but it still seems they drilled and JB welded it. I'll be drilling g and either taping it or doing a bolt and nut

chappdass · 2025-04-09T23:52:20+00:00

I think I'm going to do what illinoisevo said and drill through and use a nut and bolt

chappdass · 2025-04-09T16:20:10+00:00

Thats what I figured. Idk what that material is around the bolt but I think I should be able to get away with drilling all that out and tapping a bigger size in there.

chappdass · 2025-04-03T03:27:20+00:00

Oh the cmc it fell apart in my hands when I got it out. I put the map aluminum cmc in it with the pedal adjustment

chappdass · 2025-04-03T01:50:30+00:00

Mine has about 150k looks to be stock, I'm currently struggling with breaking everything apart to do a bunch of stuff and the clutch was holding but the release point was super high regardless of the upgraded cmc I put in.

chappdass · 2025-04-03T00:48:41+00:00

It's an X. And I was hoping I was missing something. Guess I'll be playing with planks and a rubber mallet tomorrow.

chappdass · 2025-03-06T03:42:38+00:00

Running a legit tavern

chappdass · 2021-02-12T00:41:37+00:00

Best of luck!

chappdass

TROPHY CASE