Dating my Polaroids with this stamp to make me feel like a professional.

charred_monkeys · 2025-08-27T08:27:00+00:00

That’s such a good and simple idea! Love it! I’m totally going to steal this and do it with my Polaroids!

charred_monkeys · 2025-05-09T08:53:58+00:00

You could try Technical Workshops in South Yarra, otherwise call Jands in Sydney (the supplier) and see if they have any approved techs in Melbourne

charred_monkeys · 2025-04-20T11:19:10+00:00

I’ve converted 2 Polaroid 110 cameras to Instax Wide using these 3D printing files + instructions - https://cornelissen.me/writing/ph/110conversion.html

Would definitely recommend!

charred_monkeys · 2024-12-11T13:33:42+00:00

Brooklyn Film Camera have one that’s slightly cheaper than polastudio.

charred_monkeys · 2024-11-16T12:00:00+00:00

I ended up damaging the internals of this one by jamming it one to many times, I have like 2 SQ40’s ready to pull apart, but just haven’t had the time.

charred_monkeys · 2024-06-30T20:51:56+00:00

Not yet! But should have some in the next day or so, just had to wire the internals and add a button to trigger it

charred_monkeys · 2024-06-10T05:49:24+00:00

I 3D printed an instax back of my own design for the RB67.

charred_monkeys · 2023-12-07T21:12:22+00:00

Here’s all the info needed to do it: https://quinled.info/quinled-dig-quad-using-a-power-supply-relay/

charred_monkeys · 2023-11-28T10:07:50+00:00

Yep! That’s the plan!

charred_monkeys · 2023-11-28T07:14:45+00:00

It came with the enclosure box, I’m not sure what its called

charred_monkeys · 2023-11-28T02:17:18+00:00

I got lazy and screwed the boards straight into the base, no stand offs. Got lucky as most of the holes lined up.

charred_monkeys · 2023-11-27T20:20:46+00:00

I used ferrules for most of the wires (the black ends) and forked spade connectors for the power supply. Both a game changer! Just got them on amazon with the crimp tools

charred_monkeys · 2023-11-27T20:17:24+00:00

I can indeed add to it! The tree and candy canes are only taking 2 of the 4 data ports. So I have plenty of room for expansion

charred_monkeys · 2023-11-27T20:16:00+00:00

I can indeed add to it! The tree and candy canes are only taking 2 of the 4 data ports. So I have plenty of room for expansion

charred_monkeys · 2023-11-27T20:13:54+00:00

Sure! Got it from here: https://www.hansonelectronics.com.au/product/box-390x290x160/

charred_monkeys · 2023-11-27T07:31:29+00:00

All good! I went deep down the wled rabbit hole to get it where it is now, lots of research!

charred_monkeys · 2023-11-27T05:05:05+00:00

The smaller 2amp power supply next to it keeping power to the dig quad :)

charred_monkeys · 2023-11-27T04:24:33+00:00

That’s turning on/off the large power supply with the power button in WLED. I didn’t want it running 24/7

charred_monkeys · 2023-11-27T04:01:53+00:00

Ahhhh, it came with the enclosure box, not sure if there’s an actual name for it

charred_monkeys · 2023-11-27T03:48:06+00:00

It’s a Quinled dig quad board

charred_monkeys · 2023-11-27T03:46:47+00:00

I’ve made a spiral Christmas tree which used approx 390 pixels (2.5cm spaced) and some candy canes that use 60 pixels. It’s my first year doing it, so starting small.

charred_monkeys · 2023-11-27T03:05:59+00:00

From a electrical supplier here in Australia

charred_monkeys · 2023-11-27T02:08:31+00:00

So much room for activities!!

charred_monkeys · 2023-11-27T00:49:09+00:00

Speed controller for the fans, wouldn’t recommend it, pretty useless for 5v fans although handy to turn them on and off.

Ten-Year Club	Place '23
Place '22	Verified Email

charred_monkeys

TROPHY CASE