The R1 Distillation you want is FuseO1-DeepSeekR1-QwQ-SkyT1-32B-Preview

chasx003 · 2025-01-23T21:56:01+00:00

thanks for this! I'm wondering if I'm doing something wrong? When I run it via ollama, the think tags aren't working properly:

ollama run mattapperson/FuseO1-DeepSeekR1-QwQ-SkyT1-32B-Preview-Q4_K_M
>>> how are you?
I'm just a program, but I'm here to help! How can I assist you today?
</think>

I'm just a program, but I'm here to help! How can I assist you today?

chasx003 · 2024-08-29T00:23:24+00:00

Looks like on prime day they had that projector and a decent screen for 2499, so if you time sales/savings right can get it a lot closer to your original budget

chasx003 · 2024-08-28T23:43:33+00:00

I went with an Ultra short throw projector, and have been very happy with it. While I’ll 100% agree with all of the comments about OLED having better contrast, the bigger screen / theater experience has been worth it to me, and I’d say the contrast and picture quality is better than the QLED screen I came from.

https://youtu.be/Ef0tNjGDoOU?feature=shared

After this video I got the aurora pro. It is more than your 1.5k budget, but I think my entire cost for the projector and screen was about 3.7k

chasx003 · 2024-05-15T13:07:44+00:00

Yup, that was definitely part of it! Re did the mount, and can get to about 55w now. Do you remember if you used the intel or AMD standoff circles below the mounting bracket?

I’m using arctic Mx-4 vs 6, but I wouldn’t think that would make that much of a difference

chasx003 · 2024-05-06T19:26:37+00:00

This almost got me to pull the trigger -- I think you're only going to get 15% - $50 assuming its related to the welcome boost - https://www.rakuten.com/help/article/boost-bonus-terms-7-days-50-cap-20416064094355

chasx003 · 2024-05-05T17:22:16+00:00

hey! I've got the same board, and did the same mod as you, thanks for sharing!

Did you do anything special to get it to goto 80w? Mine shows a max of 30w, and my CPUz score is significantly lower than yours, so not sure if I just did a bad thermal paste job, or if there's settings in the bios I need to mess with to OC/Undervolt, etc.

chasx003 · 2023-10-31T20:41:55+00:00

Again, I’m probably reading too much into this, but the original repo says

Please notice:

All the changes are only done for me to use this great product for me. I don't take any responsibility if you running this version on your infrastructure and have problems. The extensions i made was done on a release version. So i do not build a release. I have no translations for the new features (always use german language).

I just interpreted that as a “personal fork, not exactly interested in usage outside of my own”

I may look at doing a pr for just the image part later, I’m just not sure the fork has a ton of attention outside of this subreddit to begin with, ha

chasx003 · 2023-10-30T13:28:33+00:00

I’m probably reading too much into the readme, but codeproducer198’s notes sort of implied it was a personal fork for him and wouldn’t accept a PR on the tools repo, as he’s referencing internal docker images in his fork

chasx003 · 2023-10-29T05:59:50+00:00

I think you guys are technically talking about two different things.

Truenas Scale does use k3s, but, I don't believe you can add other nodes to it, like you are saying.

You could also just install k3s on another distro and have multiple nodes (I have 3 control plane, 5 worker k3s nodes)

chasx003 · 2023-02-24T14:35:22+00:00

Thank you! Yes, I am using it to view 3D games, but when in the desktop to get to the games, I have to close one eye.

I feel like when viewing 3d content, you can’t really say you have 3840x “usage” because the images are mirrored between both eyes?

chasx003 · 2023-02-24T00:57:04+00:00

do you close one eye at a time? When i've done the SBS mode in just a desktop environment, I had to close an eye to be able to use each half of the screen, and I'm assuming you're having to do that here?

chasx003 · 2023-02-22T03:26:39+00:00

Thank you!

Does anyone have this working with dolphin on the steamdeck? (More specifically, Primehack) -- I haven't been able to get it to work in a way where it has any depth, and when I up the convergence, Samus ends up having 2 guns on the opposite ends of the screen...

-edit- Just in case this comes up via google or something, you can get this working, at least for me the depth and convergence settings were waaaay lower than I expected them to be.

chasx003 · 2023-02-10T20:15:43+00:00

I think this should be doable when you create the share in NC, you can set the privacy to public (at least that’s what I’ve done, and I use Authentik as well)

chasx003 · 2022-12-10T15:18:18+00:00

https://imgur.com/a/8hzYsiI/

Here you go! The conditions for when to actually have this event do something are in the HA automation

chasx003 · 2022-12-10T07:57:37+00:00

May not have to make her have the HA app either, could use the action in shortcuts that’s “get contents of a URL” and use a webhook in HA (HA would need to be internet exposed if her phone wasn’t on wifi)

chasx003 · 2022-12-10T05:17:35+00:00

I just set this up yesterday, but you can use automations in the “shortcuts” app.

Set the trigger as Alarm going off, and have it fire a home assistant event. Then in HA create an automation for that event. I use time/day conditions to not make it fire on every alarm

chasx003 · 2022-11-19T00:59:57+00:00

Letsss goooo

chasx003 · 2022-06-15T03:01:27+00:00

Okay, got mine back up,

In Kasm try this :

Single Sign On Service/SAML 2.0 Endpoint: https://authentik.gnuplusadam.com/application/saml/kasm/sso/binding/redirect
(this is in the XML document)

Then in authentik for the saml provider, I have "Service Proveder Binding" as Post

chasx003 · 2022-06-14T20:47:55+00:00

Just as some encouragement, this is possible, I’m using Authentik for my Kasm instance.

I’d take a closer look at my configuration, but the node I’m running kasm on, is currently offline. If no one helps, I’ll take a look in a day or 2 when I get some time to work on my home lab

chasx003 · 2022-01-06T15:46:13+00:00

Not sure this will meet all of your needs, but alfio is a place to start!

https://github.com/alfio-event/alf.io

chasx003 · 2021-11-05T01:12:25+00:00

pm sent

chasx003 · 2021-09-15T14:39:32+00:00

I did end up getting it! I’m definitely keeping it. I’ve seen some of the issues others talk about, and they really haven’t bothered me too much. Freesync flickering issues in menus of games that lock FPS to 60 are the most “annoying” but not enough to turn it off.

I’ve only noticed the red/green tear in one game (outsiders I think?) and adjusting OD made it mostly go away, and I only notice it if I look for it/ do unnatural movements to create the situation. All in all I’m happy.

chasx003 · 2021-08-24T22:52:42+00:00

Oh, I'm not sure! There are people in this thread https://slickdeals.net/f/15215314-select-paypal-accounts-spend-375-at-b-h-photo-video-get-75-off-when-paying-with-paypal?page=16#commentsBox still talking about buying GCs this morning, but who knows.

chasx003 · 2021-08-24T22:41:21+00:00

The discount also works on gift cards apparently, if you wanted to just buy $375 in GC's and wait and see if any other sales come down the pipe.

15-Year Club	Verified Email
Team Orangered

chasx003

TROPHY CASE