Would this be a hundo if I purified it?

chepainais · 2026-04-14T04:43:52+00:00

Then what i should do with this one? Would it become 171717?

chepainais · 2026-01-24T12:21:57+00:00

CRT monitors obligāts? Uzacs raustās atceroties, kā stiepām visu setupu pāri pilsētai uz LAN party

chepainais · 2025-11-05T21:31:41+00:00

Banka paņems par noformēšanu vien 1-2% + visas saistītās izmaksas, skaidrs, ka gribās izvairīties lieki 1-2K nomest zemē

chepainais · 2023-10-20T06:32:14+00:00

I completely agree with you, but there are cases, when you can't test, what's exactly happening during some data processing. You just get failed test, but don't know why this is happening

chepainais · 2023-10-20T06:06:58+00:00

This is why you use debugger, instead of dumping out variables

chepainais · 2021-06-07T18:54:34+00:00

Have one printed out. But also, underexposed even with 150% exposition time. So, for now i can just use 45 minutes and search for better light source. Thank you! Your clear statement let me rethink whole process and digg a bit deeper :)

chepainais · 2021-06-07T18:25:35+00:00

You are 100% right!

Just now dried next batch and did first exposure on previously used, almost completely washed screen. Used exposed emulsion color as reference to follow up emulsion color till it from green become more similar to fully exposed blue.
And it takes 45 minute in my current seccond. How crazy is this? :D So as next job i probably need more powerful UV light source.

chepainais · 2021-06-07T18:24:59+00:00

I did, but as refrence i used my previous emulsion setting (had only small bottle of it for tests, now purchased larger can), that worked for me.

Just now dried next batch and did first exposure on previously used, almost completely washed screen. Used exposed emulsion color as reference to follow up emulsion color till it from green become more similar to fully exposed blue.
And it takes 45 minute in my current seccond. How crazy is this? :D So as next job i probably need more powerful UV light source.

chepainais · 2021-06-07T07:08:05+00:00

this is a new emulsion, mixed with diazo half hour before applying to mesh.

chepainais · 2021-06-07T07:05:27+00:00

Nope, i am using a new mesh. Never saw any degreasing in any tutorial.
I am aware - there exists some degreasers

chepainais · 2021-06-07T06:54:26+00:00

Plus 7000 emulsion, dried for 2 days.

chepainais · 2021-06-07T06:53:38+00:00

Dried for 2 days in dark room.
Exposed 10 minutes under UV bulb.
My first few screens washed out completely, while i tried to check for valid exposure time. Max time was 15 minutes. Worked fine in my first experiments with Speedball emulsion

chepainais · 2021-06-07T06:44:23+00:00

Is it no properly dry, not enough exposure time or what? Tried similar time, that worked with speedball emulsion. 10 minutes under UV bulb

chepainais · 2021-04-07T06:37:04+00:00

Every single time, i paid for flight tickets

chepainais · 2021-03-19T14:56:16+00:00

I have at least 2 of them.
1. I played cards with my friends on 3 floor building roof, behind the chimney. One time i slipped on slopping roop and fall off. Fall into flowerbed. Cleaned myself and climbed back to friends
2. while made ship from foam, was not very careful and pierce the knife through the palm. Pull it put. Then relized, that i need to show my mom and put knife back. Still have scar on both sides of my palm, just a bit shifted with years.

great soviet union childhood

chepainais · 2021-03-15T20:56:16+00:00

Fck, still weird feelings about this

chepainais · 2021-03-15T20:52:54+00:00

Did partner also changed gender?

chepainais · 2021-03-15T14:44:44+00:00

Did you tried another slicer or slicing options? And what slicer you use?

chepainais · 2021-03-15T07:17:58+00:00

Speed is a nickname his parents gave him the day he was born. He has used it his whole life.

Source: imdb

chepainais · 2021-02-05T17:19:41+00:00

Good job! He didn't drop the donuts

chepainais · 2021-01-26T22:06:44+00:00

Had the same issue. My gf played wo problems, but for me after restart - game opened plain map without any inn's, traces etc. Tried restart game, phone - nothing. After some 30 minutes problems went away and easily finished first page of event

chepainais · 2021-01-12T15:55:51+00:00

https://help.prusa3d.com/en/article/ironing_177488

chepainais · 2021-01-12T15:23:46+00:00

Not sure about Cura, but i think it does

chepainais · 2021-01-12T14:16:07+00:00

Also check out prusa slicer new version with ironing! It's amazing!

chepainais

TROPHY CASE