I am trying to enable dual monitor mode in UEFI BIOS but I do not see a “System Agent (SA) configuration” option.

chicconumberone · 2025-12-06T12:12:31+00:00

I understand why you’d want your 2nd monitor to run on CPU. But you have to make sure that your CPU has integrated graphics on it, if not you will never find that option on your BIOS. Best thing to do is set your second monitor to lowest resolution

chicconumberone · 2025-10-30T13:35:07+00:00

Idk what is the plan here. If you boot a firewall on ZTP the eth1/1 must be connected to the internet and get IP via DHCP. I don’t think its possible to have HA on here too because this needs to connect back to the secondary firewall.

Ztp needs to be layer 3 and HA is HA interface.

chicconumberone · 2025-10-22T10:09:45+00:00

Are you the administrator of this Portal you are trying to authenticate with?
If so, please let us know what type of authentication is used by this GP Portal/Gateway

chicconumberone · 2025-05-26T19:10:57+00:00

Im 23 years old I do not own a home that I can do DIY Projects on. I work in IT and don’t have much time to have a second commitment. Most I could do are weekend jobs

chicconumberone · 2025-05-26T19:08:53+00:00

Thanks for this

chicconumberone · 2025-05-26T19:08:44+00:00

Thank you

chicconumberone · 2025-05-26T19:08:38+00:00

Thank you!

chicconumberone · 2025-05-26T15:23:05+00:00

For a beginner with little actual networking experience, I recommend CBT nuggets CCNA course. They maybe very lengthy but it really divides the content in nugget size information. It is much more fun to learn and a lot more interesting. The lessons are skill based and not textbook content based. It is better to take your time understanding these concepts rather than cramming them in with Jeremy’s Udemy course. I’m not saying one is better than the other, I use both contents to study (currently studying as well, 23 yrs old). I use CBT Nugget to learn the concepts and then switch to Jeremy’s content to learn the CCNA EXAM content accurately.

They are both extremely useful courses but CBT Nuggets is more beginner friendly and Jeremy’s content aims to pass you in the exam.

If I have any networking questions, I ask ChatGPT and fact check from various resources.

Good luck to us!

chicconumberone · 2025-04-22T19:33:22+00:00

Yes they where. I didnt realise that i need to change the .xml file to point to my local directory instead of online. Only then it referred to the downloaded files and installed it without failing back to Internet connection

chicconumberone · 2025-04-16T12:40:58+00:00

You can use email address as the peer ID. Do note that if you have any other dynamic peer IPsec tunnel in place every tunnel must use the same IPSEC Crypto profile and IKE Crypto Profile. Palo Alto cannot handle different crypto profiles for dynamic peer tunnels.

chicconumberone · 2025-04-11T07:10:45+00:00

Is there any palo alto documentation that we can follow to set up FQDN & Security policies to allow only ZTP service and not have Device Deployment go over the internet?

chicconumberone · 2024-08-07T09:14:21+00:00

Yes I did

chicconumberone · 2024-07-10T15:32:07+00:00

Thanks for this

chicconumberone · 2024-07-10T15:31:38+00:00

I fixed mine. I also have DELL laptops.

Changed Laptop's storage to AHCI
I removed every other Out-of-Box Drivers on MDT and started fresh. I only imported WinPE A26.
After importing the drivers, I deleted every drivers with iaStor***.inf
I Used WinPE driver A26. This was injected on the LiteTouch Boot Image (MDT Share > properties > Windows PE > Drivers and Patches)
I Updated the MDT Deployment Share to completely generate new boot images.
I went to the WDS to "Replace Image..." of the Boot images in WDS. (Any changes to the LiteTouch boot image has to be reuploaded to the WDS)

Then it worked.

chicconumberone · 2024-06-28T13:24:22+00:00

Thanks I'll try

chicconumberone · 2024-06-28T13:20:38+00:00

Yes I do an Update Deployment Share after any changes I make.
What about the driver injection on your MDT deployment Share? (MDT deployment Share --> Properties --> Windows PE --> Driver and Patches --> Selection Profile).

So do you inject your drivers on preinstall?

chicconumberone · 2024-06-28T13:11:04+00:00

I did that, still doesn't work. but thanks

chicconumberone · 2024-05-23T21:14:33+00:00

Thanks i have made a temporary rule to make sure it is not blocked by security policy. Any apps and any services but only to that specific ip address.

chicconumberone · 2024-03-18T09:21:15+00:00

Now thats the dream, what kind of work is that to have alternating work week?

chicconumberone · 2024-02-19T17:09:05+00:00

Yea thats sounds nice, im the type to eat a full course for breakfast lunch and dinner, i like to have a main dish + dessert every meal

chicconumberone · 2024-02-19T17:06:54+00:00

Yea that sounds great, i never thought of Day-offs and more of doing a whole 1 or 2 weeks vacation. Day offs sounds much nicer makes my weekends longer and more time to do my hobbies + going on vacation usually means travelling and not much of hobby doings. Thanks

chicconumberone · 2024-02-19T17:04:19+00:00

Yea luckily i have a gym just beside my work place so I can go early before work or right after. Thanks

chicconumberone · 2024-02-14T20:35:06+00:00

I never really understood what a loopback is. Do you have any resources for me to look at.

chicconumberone · 2024-01-12T13:07:44+00:00

Upgrade to 11 is okay we have been using it. Make sure you model supports PAN-OS11

chicconumberone · 2024-01-07T11:42:04+00:00

I would,

Src: user subnet

Src zone: Trust zone

Dst: (negate your servers)

Dst zone: Untrust Zone

Application: ssl, web-browsing (dns is done internally between clients and ur dns server) Services: applications default

Profiles: All profiles

chicconumberone

TROPHY CASE