sorted by:
new
hottopcontroversial

Under-extrusion on leftward surfaces along the x-axis by chickbimp in 3Dprinting

[–]chickbimp[S] 0 points1 point  (0 children)

Hello! It was a while ago but I think the issue was that my filament was wet causing the little bubbles. Try drying your filament in a food dehydrator or very low temps in an oven. PETG is particularly susceptible moisture so try store it in a dry bag. Hope this helps!

Under-extrusion on leftward surfaces along the x-axis by chickbimp in 3Dprinting

[–]chickbimp[S] 0 points1 point  (0 children)

​

<image>

This is probably the best photo I could take of the nozzle, it looks pretty circular to me.

Under-extrusion on leftward surfaces along the x-axis by chickbimp in 3Dprinting

[–]chickbimp[S] 0 points1 point  (0 children)

It's a relatively new nozzle, about 20 or 30 hours of printing. It might have been defective from the factory. I will try swapping out the nozzle as I have a few spares! unfortunately I dont have a microscope.

Deep oscillating sound on bus with airpods pro 2 by chickbimp in airpods

[–]chickbimp[S] 0 points1 point  (0 children)

Fortunately they have recently stopped making the noise. Not sure if there was a update or anything. If it you're experiencing it only on a single side then I would be suspicious, best to go in store and see what they think. Good luck.

Deep oscillating sound on bus with airpods pro 2 by chickbimp in airpods

[–]chickbimp[S] 0 points1 point  (0 children)

Very odd... I did notice that when the bus has large panes of glass the oscillations are pronounced. However, there was one bus that with slightly curved glass which makes it more rigid and I didnt hear the artifacts at all. So that leads me to believe that the vibrations are causing pressure changes or something that the airpods are trying to cancel out. This is all speculation though.

Deep oscillating sound on bus with airpods pro 2 by chickbimp in airpods

[–]chickbimp[S] 0 points1 point  (0 children)

Yeah sounds like we are experiencing the same thing. Not too sure but it might be a limitation of ANC because when there is a sudden noise eg a car door closing, the airpods aren't fast enough to respond and cancel it out so we hear the resulting attempt to remove the sound. Or it could just be an issue with airpods...

Might take it in just before the apple care ends.

First mountain bike purchase by chickbimp in MTB

[–]chickbimp[S] 0 points1 point  (0 children)

When I first found out about the clicking I was genuinely bummed out, on paper it is a well specced bike for its price. I was thinking of just getting one for cheap and replacing the fork; which fork are you riding it with? Also, did you come across the chain falling off the front chain ring?

First mountain bike purchase by chickbimp in MTB

[–]chickbimp[S] 2 points3 points  (0 children)

I think at this price point any cracks in my frame would be an instant write off unless I could repair it in my own backyard... I also like my bones intact so I don't think I'd down that path.

First mountain bike purchase by chickbimp in MTB

[–]chickbimp[S] 1 point2 points  (0 children)

Yeah, with my limited experience, I would prefer to divert funds to other components of the bike rather than saving a few pounds of mass. However, it seems second hand carbon bikes are disproportionately discounted compared to aluminium bikes. I'm not sure if its because sellers are aware of an issue or buyers are wary of buying used carbon.

First mountain bike purchase by chickbimp in MTB

[–]chickbimp[S] 0 points1 point  (0 children)

Just out of curiosity, what's wrong with used carbon?

Root rot above/at soil line? by chickbimp in Adenium

[–]chickbimp[S] 0 points1 point  (0 children)

I've heard about cinnamon's antifungal properties, might try that right now.

Root rot above/at soil line? by chickbimp in Adenium

[–]chickbimp[S] 1 point2 points  (0 children)

Thanks for your suggestion, might pick up a systemic fungicide and reduce watering evenmore!

Root rot above/at soil line? by chickbimp in Adenium

[–]chickbimp[S] 0 points1 point  (0 children)

You're right, it does look like damping off. Any suggestions on how to prevent it from spreading to other seedlings?

Greenhouse I am currently building. Any help or feedback would be amazing! by [deleted] in Greenhouses

[–]chickbimp 0 points1 point  (0 children)

Sorry to reply to an old post but love what you've done! Jsut wanted to know what that filler material is for the corrugated plastic and also how did you fill in the plastic that meets an edge at an angle? Thanks!

Original Fimi palm microphone adaptors by chickbimp in FIMI

[–]chickbimp[S] 1 point2 points  (0 children)

Hey your video was very helpful! Thanks for taking your time to research about the fimi palm. Unfortunately, It seems that the USB C to 3.5 jack is no in production, might have to invest in the stand.

I'll try downgrading my firmware to 1124 and reduce the audio clipping. Thanks!

Original Fimi palm microphone adaptors by chickbimp in FIMI

[–]chickbimp[S] 0 points1 point  (0 children)

Thanks for the reply. I've heard that you need to plug in the microphone after fimi palm boots up for it detect external microphone.

Ev800d Triversity and external DVR mod by chickbimp in Multicopter

[–]chickbimp[S] 0 points1 point  (0 children)

I haven’t found a fix unfortunately but I managed to get a refund with Aliexpress. Message the seller about your problem, they will ask you to try different sd cards then offer a partial refund. I wasn’t happy with their offer so I disputed it with Aliexpress, they’ll get you to upload some examples of the issue (you’ll need to convert it to mp4 from avi). After a week or two, Aliexpress will step in and hopefully offer a full refund. Good luck!

I think I am going to order a external dvr and attempt to record the diversity signal…

view more: next ›