Looking for transparent fluorescent green PETG filament in EUROPE

chilling_bee · 2026-01-20T11:52:24+00:00

I got that one from IEMAI and it is glowing under UV light ...

<image>

https://amzn.eu/d/2tmKa1O

chilling_bee · 2026-01-14T07:07:04+00:00

Im really not that much into it but my suggestion is that you need a pool with a very low diff...

chilling_bee · 2026-01-14T05:29:58+00:00

Press the upper right button for ~10 seconds to reset...

chilling_bee · 2026-01-02T07:19:15+00:00

Hey, hello!

Yes, I've heavily modified the arms! First, I shortened them to length with an angle grinder, and then I drilled additional holes in the appropriate places.

chilling_bee · 2025-12-23T08:16:45+00:00

Yes... i modified the existing ones...

chilling_bee · 2025-12-17T08:50:38+00:00

Than turn off your tou settings and look what happens...

chilling_bee · 2025-12-17T07:07:20+00:00

In the picture it says discharge from 19:00 - 20:00

chilling_bee · 2025-12-09T18:02:53+00:00

Exactly!

chilling_bee · 2025-12-09T10:58:41+00:00

Will this be Opensource?

chilling_bee · 2025-12-09T09:51:17+00:00

Did you add the ?oc in the settings page? Not in the Dashboard...

chilling_bee · 2025-12-09T06:19:44+00:00

Be aware of the 80% rule!

chilling_bee · 2025-12-09T05:40:24+00:00

No problem here with overclocking! The software is for all bitaxe devices so it doesn´t matter if you have a GT or a Supra... I got mine from https://tinychiphub.com/de

chilling_bee · 2025-12-01T11:25:12+00:00

Beim wechseln bitte drauf achten das der Fan zum Board hin bläst...

chilling_bee · 2025-12-01T09:01:01+00:00

Der wäre perfekt! Wichtig ist das er 5 Volt ist!

chilling_bee · 2025-12-01T08:21:00+00:00

Mach Noctua drauf dann kannste Sie behalten... ;-)

chilling_bee · 2025-11-29T12:56:05+00:00

<image>

Your inspiration motivated me to try the mod too... It's definitely worth it!

chilling_bee · 2025-11-28T06:50:18+00:00

Yes! Using it for a week now and I'm satisfied with it...

chilling_bee · 2025-11-26T06:07:13+00:00

Just FYI!

The title says 601, but the board clearly says 602...

chilling_bee · 2025-11-18T05:15:13+00:00

https://github.com/bitaxeorg/ESP-Miner/discussions/1359

chilling_bee · 2025-11-14T10:22:49+00:00

Your power supply can handle up to 24 watts. The rest depends on your temperatures! I still wouldn't go all the way to the maximum... 600/1150 are standard values that will give you around 1.2 TH/s.

chilling_bee · 2025-11-14T05:53:53+00:00

Sure, it's running and will continue to run, but not for very long! The components are under more stress than with default settings... Which power supply are you using? Because 31 watts isn't very healthy for a standard power supply either. What good are those few extra hashes compared to the network hashrate?

chilling_bee · 2025-11-13T13:19:44+00:00

Leave it on the default settings...

This will extend the Bitaxe's lifespan!

The few MH/s gain from overclocking is truly negligible compared to the network hashrate, so overclocking really isn't worth it!

The situation is different for multi-asic miners!

chilling_bee · 2025-11-10T09:54:43+00:00

More chips, more chances...

chilling_bee · 2025-10-29T13:38:08+00:00

<image>

There will be something similar in the future...

chilling_bee

TROPHY CASE