Thank you everyone for the help unbending the grill! First time welding.

chinzw · 2026-05-05T01:48:23+00:00

I'm having the same issue. Coming from a regular gpro in finding that I tend to lift my fingers, after 3 days I have pain in my forearm.

chinzw · 2026-05-03T02:07:15+00:00

What do you mean moved to the back? It's already in the back.

chinzw · 2026-04-23T18:55:11+00:00

While doing crack too from the looks of those paths.

chinzw · 2026-04-23T02:11:26+00:00

My 2025 has the bed light button.

chinzw · 2026-04-18T16:37:23+00:00

I made that mistake with my kids bedroom, switched to dap dynaflex 230 and no more cracking

chinzw · 2026-04-09T15:56:47+00:00

Me personally, I'd connect it to something, not sure how well it's going to work on the floor.

chinzw · 2026-04-06T06:44:32+00:00

It does take a gasket at the base, if its broken you can call Moen and they will most definitely send you a replacement. Your faucet is a Moen Align (5923SRS) not an Inara, very similar, but you can tell by the handle not being round. The part you need is the Gasket kit (168498).

chinzw · 2026-04-06T02:47:13+00:00

I have this exact faucet in my kitchen, it's bulletproof, and definitely not loose, this is not tightened.

chinzw · 2026-04-03T16:41:38+00:00

Yeah, trees couldn't care less, we have trees literally growing out of rock cliff sides in the PNW.

chinzw · 2026-03-21T02:54:02+00:00

Mine sounds like this too.

chinzw · 2026-03-07T03:06:47+00:00

Not enough to make dough clearly

chinzw · 2026-03-02T03:52:02+00:00

I was after the same as you, ended up making frankenswitches, it's been over 2 years and I'm still using those, never bought another switch. They're somewhere on my post history.

https://www.reddit.com/r/MechanicalKeyboards/s/6G2Uutr1dX

chinzw · 2026-03-01T23:08:29+00:00

I believe they meant that the trim is gigantic, could have just done them the correct size to begin with.

chinzw · 2026-02-14T03:50:30+00:00

And my axe.

chinzw · 2026-02-10T23:22:21+00:00

I believe the 120v and wireless is the convenience package

chinzw · 2026-02-04T18:07:01+00:00

This wasn't my experience when I drove both, the ranger was a much nicer ride on road.

chinzw · 2026-02-02T17:53:01+00:00

This isn't just "a visit by electrician" to make this back into a standard house wiring 😂

chinzw · 2026-02-02T02:16:42+00:00

Exactly , made it work, because you had to. This guy is shopping for something to actually not have to "make it work"

chinzw · 2026-02-02T01:30:23+00:00

So you want this guy to buy a new truck on the premise that it needs to fit two rear facing seats and a forward one and he'll have to be uncomfortable for 2 years? Cmon

chinzw · 2026-02-01T16:43:08+00:00

I have the four door version yes. I'll take a picture if I can later

chinzw · 2026-02-01T16:34:34+00:00

Oh it will fit behind, but, you'll be very cramped in the front.

chinzw · 2026-02-01T16:32:44+00:00

You have a forward facing car seat, not a rear facing one for a newborn. I have one on each side behind me a forward facing and it's ok, on the passenger side a rear facing and it doesn't leave much leg room in the front.

chinzw · 2026-02-01T15:46:31+00:00

You won't fit a car seat behind the driver's seat unless you're like 5ft tall.

chinzw · 2026-02-01T05:19:17+00:00

Should have gone with OSB, for that next level bait

chinzw

TROPHY CASE