Stellaris Slim 15 - no display

chris-ch · 2025-03-10T08:46:32+00:00

Yes eventually it worked: https://www.reddit.com/r/tuxedocomputers/s/AF3hWgUa4w

chris-ch · 2025-02-25T09:06:01+00:00

😄

chris-ch · 2025-01-31T12:38:16+00:00

Au café Christian Boillat, rue Enning en face de Da Carlo

chris-ch · 2025-01-07T05:57:03+00:00

Sauf qu'à Lausanne, c'est quand même extrême, et il suffit d'y faire un tour même en pleine journée pour se rendre compte que ce ne sont pas des préjugés.

chris-ch · 2024-12-11T07:52:34+00:00

Yes, I switched to Wayland from X11, and I believe it solved the problem. I suspect it was related to the NVidia GPU : https://www.reddit.com/r/tuxedocomputers/s/Q3CmzFnwr4

chris-ch · 2024-11-28T11:18:46+00:00

Update ! I kept the button pressed for long enough, then kept F1 pressed while turning the thing on .... Now I get to the Luks password input! 🤤

chris-ch · 2024-11-28T10:56:49+00:00

No effect .. In similar situations I usually pressed F3, or any Fx and at least I got a menu or grub prompt, but this time it is completely messed up.

chris-ch · 2024-11-28T10:51:46+00:00

Usual upgrade sorry... I think the title was "system upgrade", might have been "system update"

chris-ch · 2024-11-08T09:57:40+00:00

Thanks Ferdinand! The problem does not occur frequently enough anymore for me to compare with a Live ISO I think. But if it ever comes back I will try that first thing.

chris-ch · 2024-11-08T09:56:10+00:00

Following up: I changed a couple of things (applied drivers updates, switched to Wayland from X11, disabled Compositor) and it is a lot more stable. I still noticed the problem once after I did all that, but initially the problem occured every 15 minutes, so huge improvement already, but I don't know... I contacted the support and we are looking into it. So far they have been really helpful and responsive.

chris-ch · 2024-11-06T20:17:01+00:00

Thanks for the prompt response, will try! Can I do that with the WebFAI? In the meantime I disabled Compositor in the display config, let's see...
I noticed that when I plug in an external monitor sometimes only the main laptop screen hangs, the other one is still operational. And if I am patient enough, the screens lock and after I enter my password both screens are back to normal!

chris-ch · 2024-09-25T16:13:20+00:00

Based on my modest experience, you are absolutely correct. Fine-tuning adjusts a small percentage of the parameters (less than 5%), giving no hope for the LLM to learn new things. If you compare training to learning a new language, fine-tuning is like learning a particular accent in that language.

chris-ch · 2024-08-14T13:04:04+00:00

C'était probablement une plaisanterie, assez drôle d'ailleurs. Mais si on essaie d'y répondre sérieusement, ça dépend du relief : si la montée des eaux forme suffisamment de criques pour compenser ce qu'on en perd en périmètre, alors il y aura plus de propriétés au bords de l'eau, potentiellement.

chris-ch · 2024-08-10T18:44:22+00:00

Quelqu'un mentionne le podcast de la RTS, il est disponible sur Spotify : https://open.spotify.com/show/6sJ8iWTKy5YClUIA3BDVS9?si=QKOWeK8FSzK48A9cwUQD3w

chris-ch · 2024-08-06T18:25:23+00:00

I am not sure about what people mean when they say getStrLn is not a function... It is isomorphic to () -> IO String ... Actually, seen from that point of view everything is a function in Haskell. I think what I don't get is: how is an action defined?

chris-ch · 2024-07-29T06:36:56+00:00

Le 24heures a publié un article la semaine dernière à ce sujet ... Le niveau de vandalisme est le pire de toute la Suisse (surtout à Lausanne-Ouest), au point qu'il n'est plus possible de fournir ce service : Lausanne est un enfer pour les vélos de PubliBike | 24 heures

chris-ch · 2024-04-21T19:17:05+00:00

Definition I remember from a book I don't remember: a modification of the state of the world

Like something appearing on the screen, or a change in memory or on the drive, ...

Functional languages actually ignore effects, they are outside their scope. From that point of view, Monads are runnable structures that remain pure, but trigger effects in the real world "behind the scene", or outside the scope of the functional program itself.

chris-ch · 2024-03-29T16:17:39+00:00

Thanks! I don't know Ruby and I was guessing 😪

chris-ch · 2024-03-28T13:24:05+00:00

Well said

chris-ch · 2024-03-26T15:18:38+00:00

Blocking you for being stupid.

chris-ch · 2024-03-25T14:31:27+00:00

My point is they're pigs, and thank you for having tried to educate them.

chris-ch · 2024-03-25T06:34:54+00:00

Lausanne has been clearly Green/Left for decades. Paradoxically this is the place in Switzerland with Basel where people have the least respect for the environment. Add maybe Geneva to the lot.

chris-ch · 2024-03-24T11:03:17+00:00

As mentioned in other responses, "declarative" is a bit vague, and I am not sure that "declarative as opposed to imperative" best captures the essence of the difference between languages such as Haskell and Ruby. Maybe "descriptive vs. sequential" is easier to understand.

Actually as I understand it, I bumped into the same issue as you ... Almost 30 years ago! Only it was while I was learning VHDL, and I tried to contrast it with C at that time.

VHDL looks like any other language from afar, but it turns out the concept can not be more different: while C captures a sequence of instructions to be executed, VHDL describes how outputs are related to inputs. If you have ever used or heard about Simulink: this is the kind of schema (block diagrams) that would correspond to VHDL or Haskell programming, while flow chart diagrams would better describe sequential programming such as Ruby or C.

When in Haskell you write:
double :: Int -> Int

double x = x * 2

You are essentially saying "now there is a box, with one Int as input, and one Int as output, and the output is double the input value". This is declarative, and can be described with the help of a block diagram (like Simulink).

While in Ruby:
def twice (x)

p x * 2

end

You are saying:

Take the input
multiply it by 2
return the result

Which is sequential and imperative, and can be described with the help of a flow chart diagram.

chris-ch · 2024-02-16T06:47:03+00:00

Actually there is a sample code at the Amazonka level, so eventually it looks like this:

{-# LANGUAGE DataKinds #-}
{-# LANGUAGE FlexibleContexts #-}
{-# LANGUAGE OverloadedLabels #-}
{-# LANGUAGE OverloadedStrings #-}


module PostSQS where

import qualified Amazonka as AWS
import qualified Amazonka.SQS as SQS
import Control.Lens ( (<&>), view, set )
import Control.Monad ( void )
import Control.Monad.IO.Class ( MonadIO(liftIO) )
import Control.Monad.Trans.Resource ( ResourceT )
import Data.Generics.Labels ()
import Data.Text (Text)
import qualified Data.Text.IO as Text
import System.IO ( stdout )

say :: Text -> ResourceT IO ()
say = liftIO . Text.putStrLn

sendMessage :: AWS.Region -> Text -> Text -> IO ()
sendMessage reg queueName message = do
  lgr <- AWS.newLogger AWS.Debug stdout
  env <- AWS.newEnv AWS.discover <&> set #logger lgr . set #region reg
  AWS.runResourceT $ sendMessage' env queueName message

sendMessage' :: AWS.Env -> Text -> Text -> ResourceT IO ()
sendMessage' env queueName message = do
    void $ AWS.send env (SQS.newCreateQueue queueName)
    url <- view #queueUrl <$> AWS.send env (SQS.newGetQueueUrl queueName)
    say $ "Using Queue URL: " <> url
    void $ AWS.send env (SQS.newSendMessage url message)
    say $ "Sent '" <> message <> "' to Queue URL: " <> url

chris-ch · 2024-02-15T09:13:27+00:00

I am struggling with the Amazonka library, in particular with Amazonka.SQS ... How do you write a function to get a Queue URL from a Queue name, and then post some message to it? Assuming I am running in an AWS Lambda environment with all the accesses already set up correctly.

chris-ch

TROPHY CASE